Head clearancing for cams.
- notaduc
-
Topic Author
- Offline
- User
-

Registered
- Posts: 297
- Thanks: 3
Head clearancing for cams.
19 Feb 2012 14:23
So, from what I can tell grinding is required for any aftermarket cam?
I am asking because I am suddenly thinking I want cams, but my head is all clean and assembled.
I know I can find some gpz1100 cams, but...
I am asking because I am suddenly thinking I want cams, but my head is all clean and assembled.
I know I can find some gpz1100 cams, but...
1980 (mostly) KZ1000
Please Log in or Create an account to join the conversation.
- notaduc
-
Topic Author
- Offline
- User
-

Registered
- Posts: 297
- Thanks: 3
Re: Head clearancing for cams.
19 Feb 2012 14:30 - 19 Feb 2012 14:32
I guess it would be simpler to ask, are there aftermarket cams that will work with and unmodified head and stock lifters and springs.
1980 (mostly) KZ1000
Last edit: 19 Feb 2012 14:32 by notaduc.
Please Log in or Create an account to join the conversation.
- Powerstroke_fan
-
- Offline
- User
-

Registered
- Posts: 1020
- Thanks: 90
Re: Head clearancing for cams.
19 Feb 2012 14:46
yes there are drop in cams avaible.most of the hotter cams require cleancing. and may require ape adj cam sprockets, and timing of the cams. so you have to have someone who can degree in the cams or you would have to buy cam degree kit, and do it yourself. just depends on how hot cam you want.
1977 KZ 1000 work in progress
Please Log in or Create an account to join the conversation.
- notaduc
-
Topic Author
- Offline
- User
-

Registered
- Posts: 297
- Thanks: 3
Re: Head clearancing for cams.
19 Feb 2012 15:48
I can degree cams, and I can slot my gears.
Any examples of cams that fit these criteria?
Any examples of cams that fit these criteria?
1980 (mostly) KZ1000
Please Log in or Create an account to join the conversation.
- Powerstroke_fan
-
- Offline
- User
-

Registered
- Posts: 1020
- Thanks: 90
Re: Head clearancing for cams.
19 Feb 2012 19:56
i would just get on some websites and look there are alot to choose from.i went with pitstop performance with there psp 3x cam. which i have not ran yet. but they require clearance of the head and valve cover.
1977 KZ 1000 work in progress
Please Log in or Create an account to join the conversation.
- DoubleDub
-
- User
-

Public
- Thanks: 0
Re: Head clearancing for cams.
19 Feb 2012 20:12notaduc wrote: I guess it would be simpler to ask, are there aftermarket cams that will work with and unmodified head and stock lifters and springs.
The general lift numbers I have been told was about .385 is the max lift on the standard base circle before clearancing is required, but you will still want to check for interference when assembling.
Webcam 118 will fit without clearancing, 119 should.
Please Log in or Create an account to join the conversation.
- LarryC
-
- Offline
- User
-

Registered
- Posts: 1241
- Thanks: 309
Re: Head clearancing for cams.
19 Feb 2012 21:32 - 19 Feb 2012 21:33
Unfortunately, with Q.C. being what it is these days, cams that are listed as drop in should still be checked. I've seen drop in cams hit the head in places they should not. They were 118's.
I just finished a GPz11 head that someone ground for lobe clearance. The guy bought it that way and shipped it to me for porting. Had the guy tried to run his cams in that head, #1 exhaust would have chewed away at the aluminum. It wasn't because of lift. It was because the lobe was a tad wider.
If you get drop in cams, make dam sure you turn the motor over by hand and verify nothing hits. Also look at the back side of the cam sprocket bosses. I've seen them hit inside the cam chain tunnel on some brand new cams....
You can't go by lift or manufacturer propaganda alone! Check 'em before you fire the motor up.
I just finished a GPz11 head that someone ground for lobe clearance. The guy bought it that way and shipped it to me for porting. Had the guy tried to run his cams in that head, #1 exhaust would have chewed away at the aluminum. It wasn't because of lift. It was because the lobe was a tad wider.
If you get drop in cams, make dam sure you turn the motor over by hand and verify nothing hits. Also look at the back side of the cam sprocket bosses. I've seen them hit inside the cam chain tunnel on some brand new cams....
You can't go by lift or manufacturer propaganda alone! Check 'em before you fire the motor up.
Larry C.
Last edit: 19 Feb 2012 21:33 by LarryC.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
