What am I missing?!
- gecko1
-
Topic Author
- Offline
- User
-

Registered
- Posts: 2
- Thanks: 0
What am I missing?!
20 Feb 2012 16:52
:dry: Got 1982 zk750 spectre as a project bike. Got a Kawasaki manual and I tore into the engine block. Got the Cam cover over off, loosened the cam chain tensioner, and got the cam shafts out. I removed the cylinder head nuts, and the jugs move freely, problem,I need the jugs separated and they wont come loose. What am I missing, this crap manual from Kawasaki isn't helping.
Thanks a bunch, Dave
Thanks a bunch, Dave
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: What am I missing?!
20 Feb 2012 17:23
On mine there a couple of 10 mm nuts holding the cylinder to the crankcase.
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
- OnkelB
-
- Offline
- User
-

Registered
- Posts: 1011
- Thanks: 80
Re: What am I missing?!
20 Feb 2012 17:37
Take a look down the cam chain cavity. Right below where your cam sprockets used to be there should be two bolts (one front, one rear) holding the head to the cylinder block.
77 KZ 650 B1, 82 GPz 1100 B2.
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: What am I missing?!
20 Feb 2012 17:47
It's the manual's fault. :laugh: :laugh:
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Please Log in or Create an account to join the conversation.
- DoubleDub
-
- User
-

Public
- Thanks: 0
Re: What am I missing?!
20 Feb 2012 17:54650ed wrote: It's the manual's fault. :laugh: :laugh:
The Haynes manual is pretty bad on this point, but the Kawasaki manuals I've seen were quite good at pointing out these bolts...
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
