flywheel
- murr50
-
Topic Author
- Offline
- User
-

Registered
- Posts: 105
- Thanks: 3
flywheel
26 Feb 2012 16:12
No eBay APP ID and/or Cert ID defined in Kunena configurationNo eBay APP ID and/or Cert ID defined in Kunena configurationHey guys,
So I picked up an old kz650 engine from a yardsale today.. (never know when i might need some spare parts). Anyways the guy told me it was off a 77 kz650c, them same bike i have, but after closer inspection, the flywheel is different than my engine currently has.
Current
Garage sale
I was just wondering if the stator for one is interchangeable with the other.. I was thinking about using the bottom end from the garage sale engine and the top end of my current one.. Just was wondering if I need to invest in a flywheel puller..
Any help would be much appreciated. Thanks
So I picked up an old kz650 engine from a yardsale today.. (never know when i might need some spare parts). Anyways the guy told me it was off a 77 kz650c, them same bike i have, but after closer inspection, the flywheel is different than my engine currently has.
Current
Garage sale
I was just wondering if the stator for one is interchangeable with the other.. I was thinking about using the bottom end from the garage sale engine and the top end of my current one.. Just was wondering if I need to invest in a flywheel puller..
Any help would be much appreciated. Thanks
1977 kz650 C
Please Log in or Create an account to join the conversation.
- DoubleDub
-
- User
-

Public
- Thanks: 0
Re: flywheel
26 Feb 2012 16:19
The first one looks like the rotor from my 1982 Kz750-E3 and the second matches the one from my 1979 Kz650-C3.
Please Log in or Create an account to join the conversation.
- murr50
-
Topic Author
- Offline
- User
-

Registered
- Posts: 105
- Thanks: 3
Re: flywheel
26 Feb 2012 16:23
so maybe my current rotor was replaced at some point.. I will assume that means the stator will not be a fit..?
1977 kz650 C
Please Log in or Create an account to join the conversation.
- DoubleDub
-
- User
-

Public
- Thanks: 0
Re: flywheel
26 Feb 2012 16:27
Not sure about the fit - I have the stator that goes with that rotor and the cover from the Kz750 motor if you need them - was about to post them in classifieds.
Please Log in or Create an account to join the conversation.
- murr50
-
Topic Author
- Offline
- User
-

Registered
- Posts: 105
- Thanks: 3
Re: flywheel
26 Feb 2012 16:31
sounds tempting, but i wonder whether if the previous owner of my bike changed the stator to fit that rotor, and switched from a 2 phase to 3 phase regulator or visa versa.. Ill have to check tomorrow when i have some free time
1977 kz650 C
Please Log in or Create an account to join the conversation.
- murr50
-
Topic Author
- Offline
- User
-

Registered
- Posts: 105
- Thanks: 3
Re: flywheel
26 Feb 2012 16:48
No eBay APP ID and/or Cert ID defined in Kunena configurationAlso, this is what my stator looks like..
1977 kz650 C
Please Log in or Create an account to join the conversation.
- DoubleDub
-
- User
-

Public
- Thanks: 0
Please Log in or Create an account to join the conversation.
- 750steve
-
- Offline
- User
-

Registered
- Posts: 584
- Thanks: 3
Re: flywheel
26 Feb 2012 17:07 - 27 Feb 2012 10:34
I think im correct in saying your current one is for a 3 phase stator (3 yellow or white wires) & that 2nd one is for a single phase stator (2 yellow or white wires)
Thay are not interchangable unless you get the other parts for the 2nd rotor, you'll also need the reg/rect too
Thay are not interchangable unless you get the other parts for the 2nd rotor, you'll also need the reg/rect too
07 ZX6R Race Bike
1977 Z750 B2 Twin
1976 Z650 B1
1977 Z750 B2 Twin
1976 Z650 B1
Last edit: 27 Feb 2012 10:34 by 750steve.
Please Log in or Create an account to join the conversation.
- faffi
-
- Offline
- User
-

Registered
- Posts: 554
- Thanks: 36
Re: flywheel
26 Feb 2012 18:09
Alternator design was changed for 1980 IIRC.
1977 KZ650B1
1980 F1 engine
B1 3-phase alternator
B1 Points ignition
1980 F1 engine
B1 3-phase alternator
B1 Points ignition
Please Log in or Create an account to join the conversation.
- murr50
-
Topic Author
- Offline
- User
-

Registered
- Posts: 105
- Thanks: 3
Re: flywheel
26 Feb 2012 18:12
ok, thats what i figured.. I have looked online for flywheel puller information. Some people have said that there is a bolt on the bike that is usable for this.. Has anyone done this?
1977 kz650 C
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: flywheel
26 Feb 2012 19:31 - 26 Feb 2012 19:31
Maybe this diagram will help. The 1977 KZ650 C1 (and B1) generators were unique to that year. They changed in 1978 and then again later. If you change one part you need to change the whole works including regualtor and rectifier. It can be done, but only if you change all the correct pieces.
Attachment Kz650Generators.jpg not found
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Last edit: 26 Feb 2012 19:31 by 650ed.
Please Log in or Create an account to join the conversation.
- roy-b-boy-b
-
- Offline
- User
-

Registered
- Posts: 3245
- Thanks: 103
Re: flywheel
26 Feb 2012 21:09
On my bikes(1000cc) I use a axle or a swingarm bolt to remove the flywheel. On a 900 you use the big pinch bolt on the lower triple tree.
1979 LTD Street Fighter.1977 KZ1000
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
