GPZ1100 sprocket cover...

  • Fossil
  • Fossil's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 542
  • Thanks: 5

GPZ1100 sprocket cover...

28 May 2006 15:32
#50648
I need a sprocket cover for an 83/84 GPz1100. I've been trying to find out if the 750 is interchangeable - what is the site with the cross reference part numbers? If someones got a sprocket cover to part with, let me know. thanks

Please Log in or Create an account to join the conversation.

  • kzjames
  • kzjames's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 29
  • Thanks: 0

Re: GPZ1100 sprocket cover...

30 May 2006 13:23
#50945
83-84 GPZ must be much more rare than I thought.
I am also looking for a sproket cover. The one I have is cracked right below where the shift rod comes through. I bought one a while back and did not notice untill weeks later (I am a little behind on my projects) that there was a bolt hole that was broken.... So, I have two broken sprocket covers.... you can have one... or both if I can find another!!!

Please Log in or Create an account to join the conversation.

  • Fossil
  • Fossil's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 542
  • Thanks: 5

Re: GPZ1100 sprocket cover...

30 May 2006 16:33
#50975
kzjames wrote:
83-84 GPZ must be much more rare than I thought.
I am also looking for a sproket cover. The one I have is cracked right below where the shift rod comes through. I bought one a while back and did not notice untill weeks later (I am a little behind on my projects) that there was a bolt hole that was broken.... So, I have two broken sprocket covers.... you can have one... or both if I can find another!!!

Thanks for the offer, mine's cracked too. If I don't find a good one, I'll try to have mine welded up.

Please Log in or Create an account to join the conversation.

  • Mcjakass
  • Mcjakass's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7
  • Thanks: 0

Re: GPZ1100 sprocket cover...

06 Sep 2011 23:03
#474766
I know this is way too late to be useful, but maybe it can help someone who is searching through the forums for a similar problem.

The sprocket covers are definitely not interchangeable. Not only does the 1100 have a much larger footprint, but it also incorporates the clutch release mechanism into the cover whereas the 750's clutch release is exterior on the other side of the engine. (I just did an engine swap on my 750 for an 1100).

Cheers

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum