Whats up with using a GPZ head

  • ramtough_63
  • ramtough_63's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 2560
  • Thanks: 136

Whats up with using a GPZ head

01 Mar 2012 00:45 - 01 Mar 2012 00:48
#507128
I have been seeing people using GPZ heads on KZ1000's I am curious as to the gain achieved by this.
and what combinations are used. any insight is greatly appreciated

after posting I noticed oink has one on ebay it's out of my current price range but is this a desirable set up?
1978 KZ1000 A2
Thrown Together To Ride Til Winter
Facebook Page
Free Range Custom Art


1982/83 750R/GPZ
1984 Goldwing 1200 Interstate
1982 Yamahopper QT50
Previous
2 79 HD sporty XLH
02 HD FLSTS Heritage
60's HD Hummer
70's Honda 550 Four
70 Yamaha 100
and various enduros dirtbikes minibikes etc...
Last edit: 01 Mar 2012 00:48 by ramtough_63. Reason: new info

Please Log in or Create an account to join the conversation.

  • MFolks
  • MFolks's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6650
  • Thanks: 541

Re: Whats up with using a GPZ head

01 Mar 2012 00:53
#507130
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)

Please Log in or Create an account to join the conversation.

  • ramtough_63
  • ramtough_63's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 2560
  • Thanks: 136

Re: Whats up with using a GPZ head

01 Mar 2012 01:02
#507134
MFolks wrote: Some related reading: www.aperaceparts.com/tech/techkz1000.html

very interesting reading in deed
1978 KZ1000 A2
Thrown Together To Ride Til Winter
Facebook Page
Free Range Custom Art


1982/83 750R/GPZ
1984 Goldwing 1200 Interstate
1982 Yamahopper QT50
Previous
2 79 HD sporty XLH
02 HD FLSTS Heritage
60's HD Hummer
70's Honda 550 Four
70 Yamaha 100
and various enduros dirtbikes minibikes etc...

Please Log in or Create an account to join the conversation.

  • racer54
  • racer54's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1902
  • Thanks: 114

Re: Whats up with using a GPZ head

01 Mar 2012 02:52
#507144
Using a GPZ head gives you bigger ports along with the bigger valves. You will want to use bigger cams to take advantage of those as the GPZ came with cams with around .385 lift. This head also has the "bathtub" chambers or "figure 8" chambers...heard them called both. To use this head and gets all of its benefits, you need to use pistons made for this head...not KZ or regular J pistons. Otherwise you will lose some compression ratio...especially with the KZ pistons. The valve angles in the GPZ head is also different so that is a concern if used with KZ pistons. Some have used this head on KZ pistons and lost approximately 2 compression points which would probably work for a turbo but kill bottom end on a n/a KZ. The GPZ head is also thinner across combustion chamber area and has been known to crack with use on a turbo. Vance & HInes used to weld in a bridge or "wall" from one side to the other (cam to cam) because of the weakness. Best head to use for performance Kawasaki made as long as you use the right parts to go with it. Guys pay big money for them but if you are after big HP, this is the head to use.
1980 LTD (changed over the years), 1979 LTD (being rebuilt), 1977 KZ turbo and various KZ's in various states of build. KLX110

Please Log in or Create an account to join the conversation.

  • ramtough_63
  • ramtough_63's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 2560
  • Thanks: 136

Re: Whats up with using a GPZ head

01 Mar 2012 10:58
#507164
Thanks after reading the loss of compression I figured it was for ntrous or turbo use (would give my left @@@ for a turbo)

very interesting stuff
1978 KZ1000 A2
Thrown Together To Ride Til Winter
Facebook Page
Free Range Custom Art


1982/83 750R/GPZ
1984 Goldwing 1200 Interstate
1982 Yamahopper QT50
Previous
2 79 HD sporty XLH
02 HD FLSTS Heritage
60's HD Hummer
70's Honda 550 Four
70 Yamaha 100
and various enduros dirtbikes minibikes etc...

Please Log in or Create an account to join the conversation.

  • Polar_Bus
  • Polar_Bus's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 256
  • Thanks: 7

Re: Whats up with using a GPZ head

01 Mar 2012 14:08 - 01 Mar 2012 14:12
#507189
The 83-84 GPz heads also recieved a factory hand race porting . While those SUB GPZ heads really shine down the dragstrip, they are not a good head for the street (where the other 95% of us spend our time). The GPz on the street lacks midrange torque. My GPz1100 feels more like a 750 until 8500 rpm's then after that hang on REAL tight... My '82 GS1100E definitely had more midrange roll-on torque. I actually have a complete spare head and cams that i'm going to throw up on Ebay for some extra needed cash...
Bikes:
'84 GPz1100
'06 HD Fatboy
Last edit: 01 Mar 2012 14:12 by Polar_Bus.

Please Log in or Create an account to join the conversation.

  • LarryC
  • LarryC's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1241
  • Thanks: 309

Re: Whats up with using a GPZ head

02 Mar 2012 23:03
#507490
Your KZ head can be made to out flow a stock GPz11 and do it with a 2mm smaller valve. There's a time to use a GPz head and a time to use a KZ head. Depends on how big you make the motor as well as other factors.
Larry C.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum