compression difference and valve interference

  • daverclasper
  • daverclasper's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 10
  • Thanks: 0

compression difference and valve interference

06 Mar 2012 13:34
#508119
Hi. I'm doing the old kz650(81 CSR H2) to kz750(81 l model I think) conversion. The 750 barrel is possiby about 1mm lower in depth (between gasket faces) to the 650. Also the piston crowns are higher on 750 (the indentatons on piston crowns for valve non intereference are deeper on the 750, presumaby to allow for this). I will be using the 650 head which has same part no's for valves as the 750. I'm assuming the 750 pistons and smaller depth of barrel will lead to some increase in compression. Will this cause any problems and any valve hitting piston issues. Any advice would be great. Cheers, Dave

Please Log in or Create an account to join the conversation.

  • steell
  • steell's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6849
  • Thanks: 208

Re: compression difference and valve interference

06 Mar 2012 14:23
#508123
No valve to piston issues, but you will have a slight increase in compression due to the smaller combustion chamber of the 650.
KD9JUR
The following user(s) said Thank You: daverclasper

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum