Kickstart retaining ring problem

  • KZCool
  • KZCool's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 150
  • Thanks: 1

Kickstart retaining ring problem

07 Mar 2012 19:21
#508377
long story short, I cracked my starter clutch some time ago and have been using the kickstart. it hasnt been a problem untill lately, but now the retaing ring keep poping off on the shaft and te gears wont stay together to turn the crank. I've even welded it in place and it still poped off after a while. Anyone have this problem or have a fix? I might just have to buy a new starter clutch.
1976 KZ750 hardtail

Please Log in or Create an account to join the conversation.

  • KZCool
  • KZCool's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 150
  • Thanks: 1

Re: Kickstart retaining ring problem

08 Mar 2012 22:47
#508658
"BUMP"
1976 KZ750 hardtail

Please Log in or Create an account to join the conversation.

  • Motor Head
  • Motor Head's Avatar
  • Offline
  • User
  • User
    Registered
  • FIX UP YOUR BIKE RIGHT AND CHEAP
  • Posts: 5137
  • Thanks: 393

Re: Kickstart retaining ring problem

09 Mar 2012 01:42
#508685
KZcool, try adding both the bikes model and some pictures of your problem. The bikes model, engine etc can be added to your profile signature far all future and past posts. This would help get some answers probably.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: Kickstart retaining ring problem

09 Mar 2012 07:36
#508707

Attachment addsig.jpg not found

1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

  • KZCool
  • KZCool's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 150
  • Thanks: 1

Re: Kickstart retaining ring problem

09 Mar 2012 20:53
#508783
Sorry, I was in a hurry when i posted this and didnt think about it later. It's a 1976 KZ750. I'll post some pictures in a bit. Its easy to explain though. its just a round C clip type ring that sits in a groove in the kick shaft. when in place it holds tension on a spring inside the case that keeps the kickstart gears together.
1976 KZ750 hardtail

Please Log in or Create an account to join the conversation.

  • KZCool
  • KZCool's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 150
  • Thanks: 1

Re: Kickstart retaining ring problem

11 Mar 2012 23:50 - 11 Mar 2012 23:58
#509155




The first picture is of the base where the ring sits in the groove. the second is the ring. The ring sits in the groove and is pressed against the engine case by a spring pulling on the kick shaft.
1976 KZ750 hardtail
Last edit: 11 Mar 2012 23:58 by KZCool.

Please Log in or Create an account to join the conversation.

  • Motor Head
  • Motor Head's Avatar
  • Offline
  • User
  • User
    Registered
  • FIX UP YOUR BIKE RIGHT AND CHEAP
  • Posts: 5137
  • Thanks: 393

Re: Kickstart retaining ring problem

12 Mar 2012 10:18
#509193
The Heat from "Welding" would take the tension out of the cir-clip, you need a new one. The groove must be in good condition, no damage. Is everything assembled as in the diagram?


1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf

Please Log in or Create an account to join the conversation.

  • KZCool
  • KZCool's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 150
  • Thanks: 1

Re: Kickstart retaining ring problem

12 Mar 2012 22:21
#509293
yeah, everything is there, and it was coming off before. It always had some play, so I think i'm gonna try and find a high density steel or something ring thats a bit smaller. Hope it works cause I'm having a heck of a time trying to find a starter clutch.
1976 KZ750 hardtail

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: Kickstart retaining ring problem

12 Mar 2012 23:06
#509309
The 25mm circlips are part number 92033-025, and shown by kawasaki.com as "Active," meaning currently available at Kawasaki dealerships.

The circlip is used on almost 600 different Kawasaki models.

Lots of good info on kawasaki.com, including parts diagrams, part names, part numbers, models sharing same part, availability, etc. Here's a link for help with navigating the site and finding information.
Click > kzrider.com/index.php?option=com_kunena&...w&catid=13&id=376734

Good Fortune! :)
1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

  • KZCool
  • KZCool's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 150
  • Thanks: 1

Re: Kickstart retaining ring problem

13 Mar 2012 19:23
#509458
Thanks for the heads up about the kawasaki site. I always thought they should have something like that :P . And I measured the inside diameter of the ring I have and it is 21.3 mm. i think it was suposed to be the 19mm circlip that is lower on the list, but its been stretched. Definitly need a new one.
1976 KZ750 hardtail

Please Log in or Create an account to join the conversation.

  • KZCool
  • KZCool's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 150
  • Thanks: 1

Re: Kickstart retaining ring problem

14 Mar 2012 00:10
#509516
you were right by the way. I found a clearer ersion of the pats diagram and it was the 25mm.
1976 KZ750 hardtail

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum