engine flushing

  • nitrochristian
  • nitrochristian's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 39
  • Thanks: 0

engine flushing

10 Mar 2012 04:49
#508846
Anyone have any good ideas on flushing out a rebuild before final bolt up? Everything is together cept cylinders and clutch. I did a complete teardown and split cases. Thought maybe a very light oil or a thin mild petrol based solvent. Just hoping no glassbeads found there way in and I missed them.
78 KZ650
96 Ford Bronco

Please Log in or Create an account to join the conversation.

  • KraZ900
  • KraZ900's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 42
  • Thanks: 1

Re: engine flushing

10 Mar 2012 05:01
#508848
Yeah that should be fine kerosene or diesel would work also.
"The Classic Flying W"
76 KZ900 LTD
The following user(s) said Thank You: nitrochristian

Please Log in or Create an account to join the conversation.

  • TeK9iNe
  • TeK9iNe's Avatar
  • Offline
  • User
  • User
    Registered
  • What did you do!?!
  • Posts: 2436
  • Thanks: 28

Re: engine flushing

10 Mar 2012 14:28 - 10 Mar 2012 14:48
#508889
Agreed... and some good compressed air blasts through anwhere you can.

B)

OH - and also: Make certain you dont turn anything while thre is no oil in there. Dont turn the crank/cams, NOTHING. You can easily gall the bearing surfaces with no oil present!

Before final button-up, pour some oil over the cams! Put a good 1/4 pint up there.
Run the motor starter for several long bursts (plugs grounded), till the oil light goes out and the pressure has come up some before starting.

You cant be too safe!

B)
Motorcycle Shop Owner/Operator

79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors ;)
Last edit: 10 Mar 2012 14:48 by TeK9iNe.
The following user(s) said Thank You: nitrochristian

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum