Proper head and cams

  • Yorke2112
  • Yorke2112's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 17
  • Thanks: 1

Proper head and cams

20 Mar 2012 10:36
#510824
I have a kz650 that has 750 cylinders and a big bore 810 kit installed. I am currently using the 650 head with 750 cams, and 28mm mikuni's.

I have a torn apart kz750 motor w/parts, and an 82 GPz 750 head minus cams. Right now, the bike runs pretty damn good, but I have been wondering if I should build the 750 motor. Put the 750/810 big bore cylinders and GPZ heads with bigger cams.

Do you think there would be a big performance increase? Enough to warrant building the 750 and tearing the 650 apart? What are the biggest cams you recommend for street use?

Please Log in or Create an account to join the conversation.

  • LarryC
  • LarryC's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1241
  • Thanks: 309

Re: Proper head and cams

20 Mar 2012 21:56
#510920
Yorke2112 wrote: I have a kz650 that has 750 cylinders and a big bore 810 kit installed. I am currently using the 650 head with 750 cams, and 28mm mikuni's.

I have a torn apart kz750 motor w/parts, and an 82 GPz 750 head minus cams. Right now, the bike runs pretty damn good, but I have been wondering if I should build the 750 motor. Put the 750/810 big bore cylinders and GPZ heads with bigger cams.

Do you think there would be a big performance increase? Enough to warrant building the 750 and tearing the 650 apart? What are the biggest cams you recommend for street use?

The 750 head flows 10CFM more @10" of water than the 650. With an 810 piston kit, I'd go that route.
Larry C.

Please Log in or Create an account to join the conversation.

  • zukdave
  • zukdave's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1678
  • Thanks: 227

Re: Proper head and cams

22 Mar 2012 06:51 - 22 Mar 2012 06:52
#511200
Intake ports from my 650 and Gpz 750 heads.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.
Last edit: 22 Mar 2012 06:52 by zukdave.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum