650 clutch

  • NORT
  • NORT's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 3
  • Thanks: 0

650 clutch

29 Mar 2012 22:33
#512908
Just got this 650, went through the carbs and points, got it running great. the clutch won't disengage, have adjusted the cable, just seems like the rod is bottomed out even with the side cover off. what should I be looking for?

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: 650 clutch

29 Mar 2012 23:00 - 30 Mar 2012 10:33
#512912
NORT wrote: Just got this 650, went through the carbs and points, got it running great. the clutch won't disengage, have adjusted the cable, just seems like the rod is bottomed out even with the side cover off. what should I be looking for?

Am thinking clutch will stay engaged with side cover off, because then there's nothing to press against the push rod which disengages the clutch.



Good Fortune! :)
1973 Z1
KZ900 LTD
Last edit: 30 Mar 2012 10:33 by Patton.

Please Log in or Create an account to join the conversation.

  • 650ed
  • 650ed's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 15334
  • Thanks: 2832

Re: 650 clutch

30 Mar 2012 00:06
#512920
Welcome aboard. Did the person that sold you the bike tell you the engine had been replaced? Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

  • martin_csr
  • martin_csr's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7993
  • Thanks: 1648

Re: -

30 Mar 2012 09:35 - 21 Feb 2013 15:49
#512960
.
Last edit: 21 Feb 2013 15:49 by martin_csr.

Please Log in or Create an account to join the conversation.

  • roy-b-boy-b
  • roy-b-boy-b's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 3245
  • Thanks: 103

Re: 650 clutch

30 Mar 2012 09:49
#512962
Some time the clutch plates stick together if the bikes sits very long. You can try rocking the bike back and forth,remove the clutch plates,orcrank the bike and get it rolling and put it in gear and ride it.

I have had them to break loose while transporting them on a trailer. I guess the back and forth motion broke them loose. Roy
1979 LTD Street Fighter.1977 KZ1000

Please Log in or Create an account to join the conversation.

  • 650ed
  • 650ed's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 15334
  • Thanks: 2832

Re: 650 clutch

30 Mar 2012 10:19 - 30 Mar 2012 14:08
#512968
martin_csr wrote: NORT: Did you do the clutch adjustment as per the manual (sometimes the manual is ambiguous, though... depending upon the bike & manual).

Ed, what direction do you have to turn the clutch release adjusting screw on your 650?
I'd guess his would be done the same as yours?

On my 81 CSR, I have to turn it counterclockwise first, then clockwise 1/4 turn.

On '77 KZ650-C1 you loosen the locknut then loosen the adjuster screw (counter-clockwise); then you turn the adjuster screw in (clockwise) until it starts to become hard to turn (this is when it begins to disengage the clutch); the you loosen it (counter-clockwise) 1/2 turn and then tighten the locknut.

I agree his is probably the same because even though his bike is a newer model the engine has been replaced with one from a 1977 bike. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Last edit: 30 Mar 2012 14:08 by 650ed.

Please Log in or Create an account to join the conversation.

  • KZB2 650
  • KZB2 650's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1472
  • Thanks: 264

Re: 650 clutch

30 Mar 2012 11:33
#512978
roy-b-boy-b wrote: Some time the clutch plates stick together if the bikes sits very long. You can try rocking the bike back and forth,remove the clutch plates,orcrank the bike and get it rolling and put it in gear and ride it.

I have had them to break loose while transporting them on a trailer. I guess the back and forth motion broke them loose. Roy

Could be....my Barrnett clutch sticks together and needs to be rocked in gear to break loose after sitting a few days.
1978 KZ650 b-2
700cc Wiseco kit 10 to 1.
1980 KZ750 cam, ape springs, stock clutch/ Barnett springs.
Vance and Hines Header w/ comp baffle and Ape pods, Dyna S and green coils, copper wires.
29MM smooth bores W/ 17.5 pilots, 0-6s and 117.5 main
16/42 gearing X ring chain and alum rear JT sprocket.

Please Log in or Create an account to join the conversation.

  • NORT
  • NORT's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 3
  • Thanks: 0

Re: 650 clutch

30 Mar 2012 15:35
#513040
well, I pulled the clutch cover off last night and the clutches were stuck together. the ball was welded to the plunger. Yes I knew the engine had been replaced, I also have two spare engines. will have some parts today and should have it back together tonight.

Please Log in or Create an account to join the conversation.

  • roy-b-boy-b
  • roy-b-boy-b's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 3245
  • Thanks: 103

Re: 650 clutch

30 Mar 2012 16:39
#513050
It is always good news when you find the problem. Having spare parts is a big plus. Roy
1979 LTD Street Fighter.1977 KZ1000

Please Log in or Create an account to join the conversation.

  • NORT
  • NORT's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 3
  • Thanks: 0

Re: 650 clutch

04 Apr 2012 12:15
#514007
Got everything back together last night, everything adjusted and all works great. Rode it to work today even though it is raining, it will now be tough to get me off of it

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum