RPM Range?
- Guido8587
-
Topic Author
- Offline
- User
-

Registered
- Posts: 3
- Thanks: 0
RPM Range?
30 Mar 2012 02:18
Ok here's the deal. I have a 1980 LTD 650E that runs great. However the rpm seems to be to high. When im going 70mph on the high way my rpms sit around 6000. Is this correct or do i have a problem?
Attachment 003.JPG not found
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: RPM Range?
30 Mar 2012 11:01
Assuming you have the stock sprockets and rear wheel at 6000 rpm you should be traveling 80 mph. At 70 mph you should be turning about 5250 rpm. Something is not right; probably the clutch is slipping. I would start by adjusting the clutch according to the instructions in the Kawasaki Service Manual. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Please Log in or Create an account to join the conversation.
- TeK9iNe
-
- Offline
- User
-

Registered
- What did you do!?!
- Posts: 2436
- Thanks: 28
Re: RPM Range?
30 Mar 2012 11:07
Those dont look like no 70mph forks to me :blink:
Check for correct stock sprockets (like Ed said), and yes, those old 650's whined on the freeway.
Check for correct stock sprockets (like Ed said), and yes, those old 650's whined on the freeway.
Motorcycle Shop Owner/Operator
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: RPM Range?
30 Mar 2012 11:15 - 30 Mar 2012 11:22
Hello, Guido8587, and WELCOME to KZr! 
Caution: Wild Speculation Ahead. :laugh:
Perhaps the PO added touring accessories (fairing and bags), and then desiring a slower more relaxed rpm at cruising speed, changed the counter-shaft sprocket, but goofed up and fitted one tooth smaller rather than one tooth larger.
Oh ... Wait a sec! That's a roof support post -- not a sissy bar! :ohmy:
Good Fortune!
Caution: Wild Speculation Ahead. :laugh:
Perhaps the PO added touring accessories (fairing and bags), and then desiring a slower more relaxed rpm at cruising speed, changed the counter-shaft sprocket, but goofed up and fitted one tooth smaller rather than one tooth larger.
Oh ... Wait a sec! That's a roof support post -- not a sissy bar! :ohmy:
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Last edit: 30 Mar 2012 11:22 by Patton.
Please Log in or Create an account to join the conversation.
- Guido8587
-
Topic Author
- Offline
- User
-

Registered
- Posts: 3
- Thanks: 0
Please Log in or Create an account to join the conversation.
- sft1662
-
- Offline
- User
-

Registered
- Posts: 130
- Thanks: 0
Re: RPM Range?
30 Mar 2012 11:53
Count the teeth on your sprockets to see if your rpm makes sense for your mph or not before you go chasing clutch issues.
1978 KZ650 B2A
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: RPM Range?
30 Mar 2012 12:02
It's usually easy to notice when the clutch is slipping, because the rpm rises without a commiserate increase in road speed.
Good Fortune!
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- LarryC
-
- Offline
- User
-

Registered
- Posts: 1241
- Thanks: 309
Re: RPM Range?
31 Mar 2012 10:11Patton wrote: Hello, Guido8587, and WELCOME to KZr!
Caution: Wild Speculation Ahead. :laugh:
Perhaps the PO added touring accessories (fairing and bags), and then desiring a slower more relaxed rpm at cruising speed, changed the counter-shaft sprocket, but goofed up and fitted one tooth smaller rather than one tooth larger.
Oh ... Wait a sec! That's a roof support post -- not a sissy bar! :ohmy:
Good Fortune!
I'm pretty sure you just gave someone an idea for a sissy bar :woohoo:
Larry C.
Please Log in or Create an account to join the conversation.
- roy-b-boy-b
-
- Offline
- User
-

Registered
- Posts: 3245
- Thanks: 103
Re: RPM Range?
31 Mar 2012 12:40 - 31 Mar 2012 12:41
Someone got the idea a long time ago.
I think 6000 rpm on my old bike would get you 80 mph. I am not sure as I have not had my coffee. Roy
I think 6000 rpm on my old bike would get you 80 mph. I am not sure as I have not had my coffee. Roy
1979 LTD Street Fighter.1977 KZ1000
Last edit: 31 Mar 2012 12:41 by roy-b-boy-b.
Please Log in or Create an account to join the conversation.
- T_Dub
-
- Offline
- User
-

Registered
- Posts: 1441
- Thanks: 26
Re: RPM Range?
31 Mar 2012 12:54
My bike used to do around that. But I assumed it was a tach problem. That used to bounce around a lot. As the tach gets older and crappier, the spring will get softer so it'll read higher.
1977 KZ650B1
-810cc
-Cavanaugh Racing Head
-Mikuni RS34's
-GPR Muffler
-810cc
-Cavanaugh Racing Head
-Mikuni RS34's
-GPR Muffler
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: RPM Range?
31 Mar 2012 20:41
If you own or know someone who owns a decent dwell meter you can check the accuracy of the tach using it. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
