camshaft cover leak
- shimkus
-
Topic Author
- Offline
- User
-

Registered
- Posts: 30
- Thanks: 1
camshaft cover leak
05 Apr 2012 21:26
first wanted to say thanks to those on here who share thier knowledge and experience.. i've learned alot.
as far as my problem goes, i noticed a tiny oil leak coming from the nut on the front left end of the camshaft cover. i tried to tighten it and it wouldnt budge. does this mean the gaskets busted inside?
as far as my problem goes, i noticed a tiny oil leak coming from the nut on the front left end of the camshaft cover. i tried to tighten it and it wouldnt budge. does this mean the gaskets busted inside?
'81 kz650h1
'88 el250-d
'88 el250-d
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: camshaft cover leak
05 Apr 2012 22:03
I am unaware of KZ camshaft covers with nuts. What kind of bike is this, a Harley?
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: camshaft cover leak
05 Apr 2012 22:06
Welcome to KZR. Hopefully with the bike year and model info your question will be answered soon. You can add the bike info into your user profile under signature for all past and present posts. That will help alot for getting the right answers.
So the bolt won't turn in or out, as in seized? Or it won't tighten any further? Year of the bike, etc so the correct answer can be had.
So the bolt won't turn in or out, as in seized? Or it won't tighten any further? Year of the bike, etc so the correct answer can be had.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
- shimkus
-
Topic Author
- Offline
- User
-

Registered
- Posts: 30
- Thanks: 1
Re: camshaft cover leak
06 Apr 2012 11:27
Sorry, I meant bolt. its not siezed, just wont tighten further. im 85% sure its a gasket rip on the inside thats leaking up and out.
I changed my signature, but just in case its a 1981 csr kz650h.
I changed my signature, but just in case its a 1981 csr kz650h.
'81 kz650h1
'88 el250-d
'88 el250-d
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: camshaft cover leak
06 Apr 2012 12:01
Perhaps the bolt is too long.
Meaning it might not be the correct length bolt for this particular application.
Good Fortune!
Meaning it might not be the correct length bolt for this particular application.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: camshaft cover leak
06 Apr 2012 14:45
The 20 cylinder head bolts are all the same, so if you think it may be the wrong length you can pull any of the other bolts and compare it. However, if you cannot tighten it any further because it just keeps turning and not getting tighter you have stripped the threads in the cylinder head and will need to have that repaired. To be safe, you should be using a torque wrench calibrated in Inch Pounds to tighten those bolts because it doesn't take much ooomph to strip them. They should be torqued to 61 - 78 inch pounds. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Please Log in or Create an account to join the conversation.
- shimkus
-
Topic Author
- Offline
- User
-

Registered
- Posts: 30
- Thanks: 1
Re: camshaft cover leak
07 Apr 2012 18:31
its a factory bolt, I looked at it today and its leaking from the gasket itself on the other side. spose I will find out now that i have to replace it. thanks
'81 kz650h1
'88 el250-d
'88 el250-d
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: camshaft cover leak
07 Apr 2012 22:23
Check your valve clearances when you have the valve cover off. On the 650 it has the shims for the lash setting below the cam follower bucket. So that means the camshafts would have to be removed for changing the shim. have you got a Factory Service Manual for your bike? If not hopefully someone will be kind enough to post a link to a download.
I would check to be sure it is not leaking from the tach drive gear seal, as that is real common.
You can get your parts at z1enterprises.com
I would check to be sure it is not leaking from the tach drive gear seal, as that is real common.
You can get your parts at z1enterprises.com
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
- shimkus
-
Topic Author
- Offline
- User
-

Registered
- Posts: 30
- Thanks: 1
Re: camshaft cover leak
08 Apr 2012 11:18 - 08 Apr 2012 11:22
i do have the manual, and the funny thing is the tach port is leaking, but the other spot on the top is too so i am going to go after both this week..
'81 kz650h1
'88 el250-d
'88 el250-d
Last edit: 08 Apr 2012 11:22 by shimkus. Reason: not the cable, but the port going into the engine
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
