Tuned head swap
- munkybrain2010
-
Topic Author
- Offline
- User
-

Registered
- Clueless..
- Posts: 43
- Thanks: 0
Tuned head swap
01 May 2012 21:01
Today I found out that my 2 cyl has horrible compression. It should have 170 +-15 psi but it has 140 and i can touch it even after a long ride. the rest are only around 150. my bike doesnt run too bad considering and I was thinking about doing a valve adjustment and making sure all the valves were in good shape soon.
My question is since I have another head can I just adjust the valves on that one and swap it to the one on my bike? I figured this would save some time waiting for parts and the new head gasket might help a little with the low psi if it is indeed ring issues and not a stuck or bent valve.
My question is since I have another head can I just adjust the valves on that one and swap it to the one on my bike? I figured this would save some time waiting for parts and the new head gasket might help a little with the low psi if it is indeed ring issues and not a stuck or bent valve.
Keep it together man!
79 KZ650 "Geto Cycle"
79 KZ650 "Geto Cycle"
Please Log in or Create an account to join the conversation.
- DoubleDub
-
- User
-

Public
- Thanks: 0
Re: Tuned head swap
01 May 2012 23:12
140 shouldn't cause cold exhaust. Sounds like you're having other issues. Doubt the head gasket will help - I would adjust the valves and check you spark/ignition if that doesn't help.
Please Log in or Create an account to join the conversation.
- Nebr_Rex
-
- Offline
- User
-

Registered
- Posts: 1889
- Thanks: 295
Re: Tuned head swap
02 May 2012 01:21
Try retorquing your head.
2002 ZRX1200R
81 GPz1100
79 KZ1000st daily ride
79 KZ1000mk2 prodject
78 KZ650sr
78 KZ650b
81 KZ750e
80 KZ750ltd
77 KZ400/440 cafe project
76 KZ400/440 Fuel Injected
www.dotheton.com/index.php?threads/dr-je...air-of-kz400s.39120/
.
81 GPz1100
79 KZ1000st daily ride
79 KZ1000mk2 prodject
78 KZ650sr
78 KZ650b
81 KZ750e
80 KZ750ltd
77 KZ400/440 cafe project
76 KZ400/440 Fuel Injected
www.dotheton.com/index.php?threads/dr-je...air-of-kz400s.39120/
.
Please Log in or Create an account to join the conversation.
- baldy110
-
- Offline
- User
-

Registered
- Posts: 2272
- Thanks: 512
Re: Tuned head swap
02 May 2012 12:22
140 pounds is not "horrible" compression. I have engines run really well with compression as low as 80 pounds. You have another issue other than compression here.
Please Log in or Create an account to join the conversation.
- zed1015
-
- Offline
- User
-

Registered
- Posts: 3374
- Thanks: 2080
Re: Tuned head swap
02 May 2012 13:09munkybrain2010 wrote: My question is since I have another head can I just adjust the valves on that one and swap it to the one on my bike? I figured this would save some time waiting for parts and the new head gasket might help a little with the low psi if it is indeed ring issues and not a stuck or bent valve.
Simple answer. YES.
AIR CORRECTOR JETS FOR VM CARBS AND ETHANOL RESISTANT VITON CHOKE PLUNGER SEAL REPLACMENT FOR ALL CLASSIC AND MODERN MOTORCYCLE CARBURETTORS
www.kzrider.com/forum/23-for-sale/611992...lide-mikunis?start=1
www.kzrider.com/forum/23-for-sale/611992...lide-mikunis?start=1
Please Log in or Create an account to join the conversation.
- DoubleDub
-
- User
-

Public
- Thanks: 0
Re: Tuned head swap
02 May 2012 13:29zed1015 wrote:munkybrain2010 wrote: My question is since I have another head can I just adjust the valves on that one and swap it to the one on my bike? I figured this would save some time waiting for parts and the new head gasket might help a little with the low psi if it is indeed ring issues and not a stuck or bent valve.
Simple answer. YES.
He's right, I was just trying to point out that swapping the head won't necessarily resolve the issue. I hope you didn't take that wrong. The FSM I have says 90psi is when you might start having combustion issues related to compression.
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: Tuned head swap
02 May 2012 14:01zed1015 wrote:munkybrain2010 wrote: My question is since I have another head can I just adjust the valves on that one and swap it to the one on my bike? I figured this would save some time waiting for parts and the new head gasket might help a little with the low psi if it is indeed ring issues and not a stuck or bent valve.
Simple answer. YES.
Yes?? Please explain how replacing the head and the head gasket will help with a ring issue? I don't see the connection. :dry: Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Please Log in or Create an account to join the conversation.
- zed1015
-
- Offline
- User
-

Registered
- Posts: 3374
- Thanks: 2080
Re: Tuned head swap
02 May 2012 16:15 - 02 May 2012 16:18
Well! Am i the only one who fully reads posts before replying ?
I said YES to his SPECIFIC question regarding preparing his spare head to swop.
It will save time waiting for parts as he was going to do the valves anyhow.
I never said anything about rings.
The text regarding rings and gasket was a STATEMENT he made NOT A QUESTION.
I said YES to his SPECIFIC question regarding preparing his spare head to swop.
It will save time waiting for parts as he was going to do the valves anyhow.
I never said anything about rings.
The text regarding rings and gasket was a STATEMENT he made NOT A QUESTION.
AIR CORRECTOR JETS FOR VM CARBS AND ETHANOL RESISTANT VITON CHOKE PLUNGER SEAL REPLACMENT FOR ALL CLASSIC AND MODERN MOTORCYCLE CARBURETTORS
www.kzrider.com/forum/23-for-sale/611992...lide-mikunis?start=1
www.kzrider.com/forum/23-for-sale/611992...lide-mikunis?start=1
Last edit: 02 May 2012 16:18 by zed1015.
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: Tuned head swap
02 May 2012 16:35 - 02 May 2012 16:40
zed1015 wrote: "Well! Am i the only one who fully reads posts before replying ?"
Simple answer. YES. :laugh:
Simple answer. YES. :laugh:
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Last edit: 02 May 2012 16:40 by 650ed.
Please Log in or Create an account to join the conversation.
- munkybrain2010
-
Topic Author
- Offline
- User
-

Registered
- Clueless..
- Posts: 43
- Thanks: 0
Re: Tuned head swap
04 May 2012 14:33
Right on thank you! What would the cold exhaust be related to?
i assumed it was my compression because the cold pipe is the cylinder with low compression. I mentioned the head gasket because mine doesnt seem to be spewing any air or oil but there is a ring of oil around the mating surface, is this normal? Will a retorquing help?
It actually doesnt run bad at all and idles pretty nicely.
I also just replaced the coils with brand new emgo 4ohm's.
Ive pretty much resigned myself to just letting the engine blow up since I have experienced every problem with this bike and I was pretty fed up. I may just take off the valve cover and check it out before i do that though since I can tool around on my Seca.
Thanks every one sorry for throwing like 10 questions into one post but Im so close to having a smooth running bike... you know the feeling
i assumed it was my compression because the cold pipe is the cylinder with low compression. I mentioned the head gasket because mine doesnt seem to be spewing any air or oil but there is a ring of oil around the mating surface, is this normal? Will a retorquing help?
It actually doesnt run bad at all and idles pretty nicely.
I also just replaced the coils with brand new emgo 4ohm's.
Ive pretty much resigned myself to just letting the engine blow up since I have experienced every problem with this bike and I was pretty fed up. I may just take off the valve cover and check it out before i do that though since I can tool around on my Seca.
Thanks every one sorry for throwing like 10 questions into one post but Im so close to having a smooth running bike... you know the feeling
Keep it together man!
79 KZ650 "Geto Cycle"
79 KZ650 "Geto Cycle"
Please Log in or Create an account to join the conversation.
- DoubleDub
-
- User
-

Public
- Thanks: 0
Re: Tuned head swap
04 May 2012 16:41
My first guess with 140psi would be too rich or no spark.
Please Log in or Create an account to join the conversation.
- TexasKZ
-
- Offline
- Platinum Member
-

Registered
- Posts: 8420
- Thanks: 2804
Re: Tuned head swap
04 May 2012 18:54
A pipe cool enough to touch after a ride is a sure sign that that cylinder is not firing at all. To make a bang, all you need is fuel, air, compression and spark. Since compression is present, one of the others is missing.
Re-torquing the head may stop the oil leak. It's certainly worth a try.
Re-torquing the head may stop the oil leak. It's certainly worth a try.
1982 KZ1000 LTD parts donor
1981 KZ1000 LTD slowly moving toward resurrection
2000 ZRX1100 not ridden enough
www.kzrider.com/forum/11-projects/620336...amateur-build-thread
1981 KZ1000 LTD slowly moving toward resurrection
2000 ZRX1100 not ridden enough
www.kzrider.com/forum/11-projects/620336...amateur-build-thread
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
