valves off e bay worth it

  • wood9781
  • wood9781's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 25
  • Thanks: 0

valves off e bay worth it

04 May 2012 09:22
#519773
Has anybody use the valves from nichie cycle off ebay for the. Z1 900 I bought all four for under $100

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: valves off e bay worth it

04 May 2012 15:45 - 04 May 2012 15:46
#519825
I bought all four valves for my 750 twin off ebay, they were good. I think the seller was Rusty Riders LLC?
1979 KZ-750 Twin
Last edit: 04 May 2012 15:46 by bountyhunter.

Please Log in or Create an account to join the conversation.

  • zed1015
  • zed1015's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 3375
  • Thanks: 2084

Re: valves off e bay worth it

04 May 2012 20:22
#519862
Carefull.
Some of those cheap valves need work to fit.
They sit too high as the stems are too long and close up the valve clearance to zero.
Had some recently that needed 1.5mm trimming off the stem to get clearance and they still had over the 4.2 minimum above the collet groove.
You get what you pay for ;)
AIR CORRECTOR JETS FOR VM CARBS AND ETHANOL RESISTANT VITON CHOKE PLUNGER SEAL REPLACMENT FOR ALL CLASSIC AND MODERN MOTORCYCLE CARBURETTORS
www.kzrider.com/forum/23-for-sale/611992...lide-mikunis?start=1






The following user(s) said Thank You: wireman

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: valves off e bay worth it

05 May 2012 02:06
#519927
I would assume any new valve would need to be fitted, since I can't get shims for my engine and the machinist worked the valves so the finished height matched original.
1979 KZ-750 Twin

Please Log in or Create an account to join the conversation.

  • z1kzonly
  • z1kzonly's Avatar
  • Offline
  • User
  • User
    Registered
  • Sustaining Member
  • Posts: 2815
  • Thanks: 527

Re: valves off e bay worth it

05 May 2012 02:15
#519928
"oinkjohnson" ebayr sells stock valves all the time.
Your going to have to have someone quick gring them at a 45' angle
and get lucky and lap them in to the seats.
No easy fix, ya got to do it right
Livin in "CheektaVegas, NY
Went thru 25 of these in 40 yrs.
I SOLD OUT! THE KAW BARN IS EMPTY.
More room for The Old Girl, Harley 75 FLH Electra Glide,
Old faithful! Points ign. Bendix Orig. carb.
Starts everytime!

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum