Dyna S mounting problem '84 ZN1100

  • bexx
  • bexx's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 4
  • Thanks: 0

Dyna S mounting problem '84 ZN1100

10 May 2012 17:34
#521287
Gentlemen! I want to upgrade the ignition on my '84 ZN1100. I picked up a Dyna S kit that won't fit. I emailed Dynatek and they responded with the following info: Kawasaki changed the 'pick up mounting' in '82. However, if I change the 'right side casting' to one from an earlier 'J' model it'll fit WITH a 'mechanical advancer'.
I must admit to being a total Noob in regard to these things and don't know where to look and what exactly to look for. I've looked on ebay and PowersEdge (OEM parts) to no avail.
Any help/advice/links would be greatly appreciated!
Thanks in advance!

Please Log in or Create an account to join the conversation.

  • etbike3135
  • etbike3135's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 379
  • Thanks: 50

Re: Dyna S mounting problem '84 ZN1100

10 May 2012 18:37
#521301
Your bike has a CDI ignition and you need a ignition housing from an 81 up with a mechanical advancer. Dont know which models had the CDI but if you found and LTD or CSR 1000 housing they would work.
1973 Kawasaki Z1
18 years in dragbikes

Please Log in or Create an account to join the conversation.

  • etbike3135
  • etbike3135's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 379
  • Thanks: 50

Re: Dyna S mounting problem '84 ZN1100

11 May 2012 07:16
#521486
No eBay APP ID and/or Cert ID defined in Kunena configurationI just searched a couple minutes and found this, im sure there is a cheaper one somewhere. The earier KZ's had a smaller seal and your need the big seal J version like this one.
1973 Kawasaki Z1
18 years in dragbikes

Please Log in or Create an account to join the conversation.

  • bexx
  • bexx's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 4
  • Thanks: 0

Re: Dyna S mounting problem '84 ZN1100

11 May 2012 11:18
#521523
So thats what I'm looking for in regards to 'right side casting'? A inner ignition cover? And what about the 'mechanical advancer'? Is that part of the Dyna kit or is that something seperate/stock?

Please Log in or Create an account to join the conversation.

  • Motor Head
  • Motor Head's Avatar
  • Offline
  • User
  • User
    Registered
  • FIX UP YOUR BIKE RIGHT AND CHEAP
  • Posts: 5137
  • Thanks: 393

Re: Dyna S mounting problem '84 ZN1100

11 May 2012 11:25
#521524
Is there a problem with your Factory Ignition? Changing out to a Dyna S and mechanical advance doesn't sound like an upgrade. Maybe the Dyna 2000 with a programmable curve would be a upgrade over the stock system.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf

Please Log in or Create an account to join the conversation.

  • baldy110
  • baldy110's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 2272
  • Thanks: 512

Re: Dyna S mounting problem '84 ZN1100

11 May 2012 11:59
#521533
What motor head said. The stock Kawasaki electronic ignition is very good, don't mess with it if works.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum