wrist pin buttons
- 79kz1000*
-
Topic Author
- Offline
- User
-

Registered
- Posts: 89
- Thanks: 1
wrist pin buttons
15 May 2012 18:13
How do the wrist pin buttons work instead of the clips?
79 kz 1000 ltd
76 kz 900
76 kz 900
Please Log in or Create an account to join the conversation.
- zed1015
-
- Away
- User
-

Registered
- Posts: 3374
- Thanks: 2080
Re: wrist pin buttons
15 May 2012 18:45
They just slot in the piston either side of the pin and stop the pin from sliding sideways and gouging the liner.
They are usually teflon although some early ones (russ collins etc) were aluminium.
Really meant for drag strip/race use for ease and speed of dissasembly and re-use.
If used for prolonged running hours when say used in a road bike, they will leave a polished vertical strip on the liner wall.
They are usually teflon although some early ones (russ collins etc) were aluminium.
Really meant for drag strip/race use for ease and speed of dissasembly and re-use.
If used for prolonged running hours when say used in a road bike, they will leave a polished vertical strip on the liner wall.
AIR CORRECTOR JETS FOR VM CARBS AND ETHANOL RESISTANT VITON CHOKE PLUNGER SEAL REPLACMENT FOR ALL CLASSIC AND MODERN MOTORCYCLE CARBURETTORS
www.kzrider.com/forum/23-for-sale/611992...lide-mikunis?start=1
www.kzrider.com/forum/23-for-sale/611992...lide-mikunis?start=1
Please Log in or Create an account to join the conversation.
- Street Fighter LTD
-
- Offline
- Moderator
-

Registered
- TURBO, Its Better to be Blown than Injected
- Posts: 5190
- Thanks: 2339
Re: wrist pin buttons
15 May 2012 19:24
MTC Piston kits come with wrist pin buttons. I think they are the way to go.
Original owner 78 1000 LTD
Mr Turbo Race Kit, MTC 1075 Turbo pistons by PitStop Performance , Falicon Ultra Lite Super Crank, APE everything. Les Holt @ PDM's Billet Goodies . Frame by Chuck Kurzawa @ Logghe Chassis . Deep sump 5qt oil pan. RIP Bill Hahn
Please Log in or Create an account to join the conversation.
- MDawnz1
-
- Offline
- User
-

Registered
- Posts: 319
- Thanks: 27
Re: wrist pin buttons
18 May 2012 02:35
Think about this..
If they were such a great advance,
Why don't all new fast NEW bikes come stock with them?
For RACE engines ONLY.
PS how long did your last new Teflon frying pan last?
If they were such a great advance,
Why don't all new fast NEW bikes come stock with them?
For RACE engines ONLY.
PS how long did your last new Teflon frying pan last?
1974 Z1a, still 903
Please Log in or Create an account to join the conversation.
- APE Jay
-
- User
-

Public
- Thanks: 0
Re: wrist pin buttons
18 May 2012 02:57
When we set up a button, pin assembly, we run it .020" less than the bore, so that the buttons do not constantly ride the bore. They will last a very long time and are at home in street motors as race motors.
On some applications where the piston is a slipper design, or severely side milled, we make aluminum buttons that have a diameter that press fits into the pin, thereby creating aluminum tipped pins. These just slip in the piston and the cylinder goes on.
During tear downs service, they just slide out.
On some applications where the piston is a slipper design, or severely side milled, we make aluminum buttons that have a diameter that press fits into the pin, thereby creating aluminum tipped pins. These just slip in the piston and the cylinder goes on.
During tear downs service, they just slide out.
Please Log in or Create an account to join the conversation.
- MDawnz1
-
- Offline
- User
-

Registered
- Posts: 319
- Thanks: 27
Re: wrist pin buttons
18 May 2012 03:03APE Jay wrote: When we set up a button, pin assembly, we run it .020" less than the bore, so that the buttons do not constantly ride the bore. They will last a very long time and are at home in street motors as race motors.
On some applications where the piston is a slipper design, or severely side milled, we make aluminum buttons that have a diameter that press fits into the pin, thereby creating aluminum tipped pins. These just slip in the piston and the cylinder goes on.
During tear downs service, they just slide out.
Thanks Jay,
I learn something new everyday.
1974 Z1a, still 903
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
