zx 12
- Powerstroke_fan
-
Topic Author
- Offline
- User
-

Registered
- Posts: 1020
- Thanks: 90
zx 12
20 May 2012 21:04
Has anyone ever thought about or put a zx 12 or zx 14 on a kz? from what i have read these are some bad motors. Just wondering what all would go into it getting it in the frame?
1977 KZ 1000 work in progress
Please Log in or Create an account to join the conversation.
- racer54
-
- Offline
- User
-

Registered
- Posts: 1902
- Thanks: 114
Re: zx 12
20 May 2012 21:27
I'm sure there would be many obstacles to overcome but one of the main ones would be the frame...especially the backbone part on the KZ. Under the tank is where a ZX12-14 injectors are located along with the air cleaner. Look at the shape of a KZ tank and the shell off one of those other bikes and you can see the difference you would have to deal with. I've seen a busa motor used but that bike was using an aftermarket frame, etc....basically he just hung KZ bodywork on the busa set-up. Looked good and ran good but that would be simple compared to trying to fit a 12-14 motor into a KZ. You would basically end up with very little of original frame left. Then you have to wire in electrical system to handle the issures with the injectors, etc. And that's just the beginning.
1980 LTD (changed over the years), 1979 LTD (being rebuilt), 1977 KZ turbo and various KZ's in various states of build. KLX110
Please Log in or Create an account to join the conversation.
- ultimate fighter
-
- Offline
- User
-

Registered
- Posts: 178
- Thanks: 6
Re: zx 12
20 May 2012 21:38
Maybe if you were to re-index it in the frame and allow it to be a stressed member.
however you'd need to change most everything on the bike, in which case you might as well start with another bike
however you'd need to change most everything on the bike, in which case you might as well start with another bike
love building motorcycles one headache at a time
Please Log in or Create an account to join the conversation.
- steell
-
- Offline
- User
-

Registered
- Posts: 6849
- Thanks: 208
Re: zx 12
21 May 2012 00:38
ZX12 and ZX14 motors are not stressed frame members, they hang from the backbone.
It's a major undertaking to install either one in a ZX11 frame, and the ZX11 is already liquid cooled with the forward slanting cylinder block.
Best motor for a KZ frame is the matching KZ motor
It's a major undertaking to install either one in a ZX11 frame, and the ZX11 is already liquid cooled with the forward slanting cylinder block.
Best motor for a KZ frame is the matching KZ motor
KD9JUR
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: zx 12
21 May 2012 09:06
Don't listen to those nay-sayers! It’s a simple, direct swap. Just follow these steps:
1. Remove the valve stem caps from the tires of the KZ
2. Hold the caps while a friend rolls the KZ forward about 20 feet
3. Have the friend then roll the ZX up to the spot that the KZ previously occupied
4. Install the caps on the ZX
That’s all there is to it; you’re ready to ride. :whistle:
And if you ever change your mind, you can easily reverse the change.
1. Remove the valve stem caps from the tires of the KZ
2. Hold the caps while a friend rolls the KZ forward about 20 feet
3. Have the friend then roll the ZX up to the spot that the KZ previously occupied
4. Install the caps on the ZX
That’s all there is to it; you’re ready to ride. :whistle:
And if you ever change your mind, you can easily reverse the change.
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: zx 12
21 May 2012 09:30:woohoo: :woohoo: :woohoo: :woohoo: :woohoo:650ed wrote: Don't listen to those nay-sayers! It’s a simple, direct swap. Just follow these steps:
1. Remove the valve stem caps from the tires of the KZ
2. Hold the caps while a friend rolls the KZ forward about 20 feet
3. Have the friend then roll the ZX up to the spot that the KZ previously occupied
4. Install the caps on the ZX
That’s all there is to it; you’re ready to ride. :whistle:
And if you ever change your mind, you can easily reverse the change.
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- JEFFG1
-
- Offline
- User
-

Registered
- Posts: 341
- Thanks: 16
Re: zx 12
21 May 2012 10:54
i got a friend that put a kz 1428 with turbo motor in a 1990s zx1100 frame but not vise-a-versa.slick deal :woohoo:
1976 KZ 900 PRO STREET 1977 kz1000 dragbike project
Please Log in or Create an account to join the conversation.
- Powerstroke_fan
-
Topic Author
- Offline
- User
-

Registered
- Posts: 1020
- Thanks: 90
Re: zx 12
21 May 2012 15:15
Ya figured it would be a big job. i am not gonna attempt it. i was just curious. I have been looking at some other bikes but the only one i see that i like were the zx11 eddie lawson replicas. Not that the kaw is going anywhere. lol ill probally have it till i die.
1977 KZ 1000 work in progress
Please Log in or Create an account to join the conversation.
- steell
-
- Offline
- User
-

Registered
- Posts: 6849
- Thanks: 208
Please Log in or Create an account to join the conversation.
- Powerstroke_fan
-
Topic Author
- Offline
- User
-

Registered
- Posts: 1020
- Thanks: 90
Please Log in or Create an account to join the conversation.
- mtbspeedfreak
-
- Offline
- User
-

Registered
- Posts: 1413
- Thanks: 36
Re: zx 12
21 May 2012 17:40
A nice REX will set you back 3-4 grand. Put that money into boring the jugs, porting the head, stump pulling cams, and match everything to a nice rack of RS carbs.
2000 ZRX 1100
1976 KZ 900- Daily Driver
1980 LTD 550- Dalton Highway survivor!
If it has tits or tires, it'll give you problems!
1976 KZ 900- Daily Driver
1980 LTD 550- Dalton Highway survivor!
If it has tits or tires, it'll give you problems!
Please Log in or Create an account to join the conversation.
- LarryC
-
- Offline
- User
-

Registered
- Posts: 1241
- Thanks: 309
Re: zx 12
21 May 2012 18:59650ed wrote: Don't listen to those nay-sayers! It’s a simple, direct swap. Just follow these steps:
1. Remove the valve stem caps from the tires of the KZ
2. Hold the caps while a friend rolls the KZ forward about 20 feet
3. Have the friend then roll the ZX up to the spot that the KZ previously occupied
4. Install the caps on the ZX
That’s all there is to it; you’re ready to ride. :whistle:
And if you ever change your mind, you can easily reverse the change.
:laugh: That's so much easier
Larry C.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
