78 KZ650 B2/A Timing Issue

  • MLow Brown
  • MLow Brown's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 13
  • Thanks: 0

78 KZ650 B2/A Timing Issue

25 May 2012 08:25
#524683
OK, this is an addendum to a post I had up on kzinfo. regarding a cam chain tensioner that needed replacement - but I can't seem to upload photo's - so I'll try here.

I've pulled the valve head cover, installed an APE cam chain tensioner, and looked for the timing marks on the cams, and they line right up (see photo's)

The only thing is that when I place them so that they are bang on, the timing indication for TDC is off by a few millimetres at the contact breaker.

What should I do here?

:iconstupid:

M

Please Log in or Create an account to join the conversation.

  • baldy110
  • baldy110's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 2272
  • Thanks: 512

Re: 78 KZ650 B2/A Timing Issue

25 May 2012 17:17
#524764
Did you remove the cams when you replaced the tensioner? On my 650 I cannot get everything perfect. I put number 1 cylinder at tdc and then put the exhaust cam in with the arrow level with the cylinder head. Then I count the number of links the manuel says and install the intake cam. The arrow on the intake cam is usually a little above the cylinder head. This is probably a result of wear.

Please Log in or Create an account to join the conversation.

  • Kawickrice
  • Kawickrice's Avatar
  • Offline
  • User
  • User
    Registered
  • After Monday & Tuesday, even the calendar says WTF
  • Posts: 2469
  • Thanks: 20

Re: 78 KZ650 B2/A Timing Issue

25 May 2012 17:46
#524774
A degree wheel will be the go to tool for dead on timing.
73 Kawasaki Z1
07 HD CVO Ultra Classic
82 Suzuki GS 1100
74 Yamaha RD 350 (My two stroke toy)
77 Kawasaki KZ 650B-1 (My putt around bike)
80 Indian Moped (My American Iron)
1
Long Gone
75 Suzuki GT550
74 GT 380
79 RD 400 Daytona Special
72 Honda CL 175
74 Honda QA 50
Tampa FL

Please Log in or Create an account to join the conversation.

  • MLow Brown
  • MLow Brown's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 13
  • Thanks: 0

Re: 78 KZ650 B2/A Timing Issue

26 May 2012 00:21
#524858
No I did not remove the cams, this is how I found them.

I mean they are spot on lined up!

But as you can see the TDC mark is a little behind.

I guess pulling the upper chain guide sprocket is next but I'd really like to hear the opinions of others. I'd assume after 30 something years, things flex.

Will I hurt my engine by running it at this point?

Please Log in or Create an account to join the conversation.

  • MLow Brown
  • MLow Brown's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 13
  • Thanks: 0

Re: 78 KZ650 B2/A Timing Issue

26 May 2012 00:21
#524859
PS - what's a degree wheel?

Please Log in or Create an account to join the conversation.

  • Motor Head
  • Motor Head's Avatar
  • Offline
  • User
  • User
    Registered
  • FIX UP YOUR BIKE RIGHT AND CHEAP
  • Posts: 5137
  • Thanks: 393

Re: 78 KZ650 B2/A Timing Issue

26 May 2012 12:04
#524928
Remember the crank gear is smaller than the cam gears, so what is off by that margin at the crank, is more at the cams. Always Line up the crank, then see about the cams. If it is off, move it one tooth, and recheck. It maybe farther off, but in the opposite direction. Your cam timing is retarded now as you have it, and moving 1 tooth may correct it, or it may make it advanced, so then you would replace the worn components to regain correct Factory setting. Or get/ make some slotted gears to adjust them, and it would be best to use the correct tools and set them up per degrees with a wheel and dial indicator.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf

Please Log in or Create an account to join the conversation.

  • MLow Brown
  • MLow Brown's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 13
  • Thanks: 0

Re: 78 KZ650 B2/A Timing Issue

26 May 2012 17:21
#524981
Thanks!!!!

I wonder if this would explain idling challenges?

That being said, what items can I look forward to replacing?

M

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum