1978 A2A getting close engine assembly

  • vintagebiker
  • vintagebiker's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 67
  • Thanks: 2

1978 A2A getting close engine assembly

26 May 2012 20:06
#525004
Total restoration, over a year in progress, getting down to the last few weeks. Here are some pics of the engine cases after being sandblasted, cleaned with thinner,than base coat/clear coat, than assembly. I'm getting the itch big time now.
If all else fails, JUMP!

Please Log in or Create an account to join the conversation.

  • 4TheKZ1000
  • 4TheKZ1000's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: 1978 A2A getting close engine assembly

26 May 2012 20:55
#525012
what paint did you use, looks nice.....I like the gloss black.

Please Log in or Create an account to join the conversation.

  • vintagebiker
  • vintagebiker's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 67
  • Thanks: 2

Re: 1978 A2A getting close engine assembly

26 May 2012 22:37
#525039
Sherwin Williams with a flexible additive, to stop cracking or flaking.
If all else fails, JUMP!

Please Log in or Create an account to join the conversation.

  • grant_stl
  • grant_stl's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 31
  • Thanks: 2

Re: 1978 A2A getting close engine assembly

29 May 2012 16:08
#525691
Question for you as I am getting ready to tear into a spare engine. The pics show you spraying even the gasket surfaces, etc. How did you either keep the paint off when painting those areas and how did you keep from damaging them when sandblasing?
83 KZ1100 Spectre, St. Louis elevation 500 ft.
K&N RU-0984 (pods)
4 into 1 Header
Pilots 40 1.5 turns out
Mains 135 (cylinders 2 and 3)
Mains 132.5 (cylinders 1 and 4)
Needles 5ix11 set on clip 2

Please Log in or Create an account to join the conversation.

  • vintagebiker
  • vintagebiker's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 67
  • Thanks: 2

Re: 1978 A2A getting close engine assembly

30 May 2012 12:32
#525859
I sand blasted the cases in 3 seperate peices. By placing the gasket area down on the table and using glass beads it didn't hurt the gasket surfaces at all. The picture of my buddy Peter spraying the cases is actually him cleaning them with laquer thinner. Any oil soaked into the cases at this point is removed. We blew them off and let them dry for the night than I spent a couple hours taping every gasket surface. All the peices are painted individually.
If all else fails, JUMP!

Please Log in or Create an account to join the conversation.

  • grant_stl
  • grant_stl's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 31
  • Thanks: 2

Re: 1978 A2A getting close engine assembly

30 May 2012 23:32
#526005
Thanks, that clear it up for me.
83 KZ1100 Spectre, St. Louis elevation 500 ft.
K&N RU-0984 (pods)
4 into 1 Header
Pilots 40 1.5 turns out
Mains 135 (cylinders 2 and 3)
Mains 132.5 (cylinders 1 and 4)
Needles 5ix11 set on clip 2

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum