Ignition
- 4TheKZ1000
-
Topic Author
- User
-

Public
- Thanks: 0
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Ignition
29 May 2012 01:03
The coil "charges" while its primary winding is grounded through the signal wire.
Becoming ungrounded is the event that causes the coil to "fire" through its secondary loop.
Good Fortune!
Becoming ungrounded is the event that causes the coil to "fire" through its secondary loop.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- MFolks
-
- Offline
- User
-

Registered
- Posts: 6650
- Thanks: 541
Re: Ignition
29 May 2012 01:14
Yep, fires two (2) sparkplugs at the same time, but one will be on the exhaust stroke. If you want a multi fire ignition, look at MSD:
www.msdpowersports.com/mc-3.html
www.msdpowersports.com/mc-3.html
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Please Log in or Create an account to join the conversation.
- MFolks
-
- Offline
- User
-

Registered
- Posts: 6650
- Thanks: 541
Re: Ignition
29 May 2012 01:22
Try this website, for some reason the link did not work:
www.msdpowersports.com/mc-3.html
www.msdpowersports.com/mc-3.html
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Please Log in or Create an account to join the conversation.
- 4TheKZ1000
-
Topic Author
- User
-

Public
- Thanks: 0
Re: Ignition
29 May 2012 08:58
the reason im asking this question is becouse im adding a electronic tach. The tach has to be set up for a single or double fire ignition. I need to know what a kz ignition is considered.
Thanks, Spencer
Thanks, Spencer
Please Log in or Create an account to join the conversation.
- kaw-a-holic
-
- Offline
- User
-

Registered
- Posts: 1808
- Thanks: 249
Re: Ignition
29 May 2012 09:20
Set it to dual Spencer. What type of tach are you using. How is it connected? Direct connect or induction?
Jon
1977 KZ1000a1
Mesa, AZ
Phoenix Fighter Project
1977 KZ1000a1
Mesa, AZ
Phoenix Fighter Project
Please Log in or Create an account to join the conversation.
- 4TheKZ1000
-
Topic Author
- User
-

Public
- Thanks: 0
Re: Ignition
29 May 2012 12:40 - 29 May 2012 12:56
tach directions. If you hit control + it will enlarge the print. The wire cutting is a concern as I really dont understand it.
Last edit: 29 May 2012 12:56 by 4TheKZ1000. Reason: new pic
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Ignition
29 May 2012 13:49 - 29 May 2012 14:07
For more legible instructions,
click here > www.autometer.com/productPDF/1077B.pdf
4 CYL.—Clip BROWN and
ORANGE wire loops.
Insulate with
electrical tape.
Hopefully, there is only one orange wire loop and only one brown wire loop.
I interpret the instructions to mean that neither the orange wire loop nor the brown wire loop is used for application with a 4 cylinder engine.
And the orange wire loop should be disabled by cutting its loop (with each of two freshly snipped orange wire ends being taped off).
And the brown wire loop should be disabled by cutting its loop (with each of two freshly snipped brown wire ends being taped off).
Good Fortune!
click here > www.autometer.com/productPDF/1077B.pdf
4 CYL.—Clip BROWN and
ORANGE wire loops.
Insulate with
electrical tape.
Hopefully, there is only one orange wire loop and only one brown wire loop.
I interpret the instructions to mean that neither the orange wire loop nor the brown wire loop is used for application with a 4 cylinder engine.
And the orange wire loop should be disabled by cutting its loop (with each of two freshly snipped orange wire ends being taped off).
And the brown wire loop should be disabled by cutting its loop (with each of two freshly snipped brown wire ends being taped off).
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Last edit: 29 May 2012 14:07 by Patton.
Please Log in or Create an account to join the conversation.
- 4TheKZ1000
-
Topic Author
- User
-

Public
- Thanks: 0
Re: Ignition
29 May 2012 14:51 - 29 May 2012 15:05
I just went to Radio Shack and purchased the items I needed to make the Tach Adapter. It cost all of $3 and have it done and on the bike. The scem I used is posted below. Does it matter what coil post I use or mount the tach feed line to? The two top ones are getting the 12 volt from my yellow/red harness wire, and I have the bottom two going to the Dyna S two wires. Just thought the 12volt might mess with the tach? use the 12volt side or the dyna s side.
So, is the Kz1000 a dual pulse ignition. One fires two cyclinders 1 and 4 and 180 deg later the other coil fires two cyclinders 2 and 3. That two firings in 360 degrees right. One full rotation of the engine is two firings.....right.
Thanks for all the help guys
So, is the Kz1000 a dual pulse ignition. One fires two cyclinders 1 and 4 and 180 deg later the other coil fires two cyclinders 2 and 3. That two firings in 360 degrees right. One full rotation of the engine is two firings.....right.
Thanks for all the help guys
Last edit: 29 May 2012 15:05 by 4TheKZ1000. Reason: more info
Please Log in or Create an account to join the conversation.
- 4TheKZ1000
-
Topic Author
- User
-

Public
- Thanks: 0
Last edit: 29 May 2012 21:22 by 4TheKZ1000. Reason: more info
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Ignition
29 May 2012 23:00
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
