In the shim

  • lemo32
  • lemo32's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • The Price of Cool aint cheap
  • Posts: 316
  • Thanks: 2

In the shim

31 May 2012 20:40
#526182
Well I got my motor back together, I have zero valve clearance, I have around 270 size shims so could somebody give me a starting point what size to start with, did a compression test had very little, so did leakdown and all valves are leaking in closed position.
1979 kz 1000 06 katana 750

Please Log in or Create an account to join the conversation.

  • 4TheKZ1000
  • 4TheKZ1000's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: In the shim

31 May 2012 20:45
#526184
did you replace the valves

Please Log in or Create an account to join the conversation.

  • lemo32
  • lemo32's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • The Price of Cool aint cheap
  • Posts: 316
  • Thanks: 2

Re: In the shim

31 May 2012 21:01
#526185
no just lapped em a bit
1979 kz 1000 06 katana 750

Please Log in or Create an account to join the conversation.

  • 4TheKZ1000
  • 4TheKZ1000's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: In the shim

31 May 2012 21:09
#526187
and you didnt have this prob before? did the valves ever leave the head, if so,,,,did they go into the orignal valve guide they came out of.

Please Log in or Create an account to join the conversation.

  • lemo32
  • lemo32's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • The Price of Cool aint cheap
  • Posts: 316
  • Thanks: 2

Re: In the shim

31 May 2012 21:21
#526188
yes they were replaced in the same guide.
1979 kz 1000 06 katana 750

Please Log in or Create an account to join the conversation.

  • lemo32
  • lemo32's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • The Price of Cool aint cheap
  • Posts: 316
  • Thanks: 2

Re: In the shim

31 May 2012 21:22
#526189
got 270 shims and around 280 what size? should I start with, anybodys guess would be cool :pinch:
1979 kz 1000 06 katana 750

Please Log in or Create an account to join the conversation.

  • Roadflyer
  • Roadflyer's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 157
  • Thanks: 13

Re: In the shim

31 May 2012 21:38
#526191
I would try some 255's
1979 kz1000 shaftie rebuild project
1045 wiseco 10.25-1 pistons
Kenny Harmon 380 lift cams

Please Log in or Create an account to join the conversation.

  • lemo32
  • lemo32's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • The Price of Cool aint cheap
  • Posts: 316
  • Thanks: 2

Re: In the shim

31 May 2012 21:51
#526193
thats about what I was thinking, 240, around there thanks
1979 kz 1000 06 katana 750

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: In the shim

31 May 2012 22:07 - 31 May 2012 22:13
#526198
No eBay APP ID and/or Cert ID defined in Kunena configurationYou can get a shim kit, depends on whether your time is more valuable.



Z1 also sells 20 piece shim sets.

www.z1enterprises.com/Valve-Shim-Kit--29mm-256.aspx

The 34 piece kit on top is a better deal.
1979 KZ-750 Twin
Last edit: 31 May 2012 22:13 by bountyhunter.

Please Log in or Create an account to join the conversation.

  • Powerstroke_fan
  • Powerstroke_fan's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1020
  • Thanks: 90

Re: In the shim

01 Jun 2012 08:04
#526264
I think the general rule is if you can spin the shim with your finger drop one size if not start with dropping to sizes.
1977 KZ 1000 work in progress

Please Log in or Create an account to join the conversation.

  • Old Man Rock
  • Old Man Rock's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6071
  • Thanks: 225

Re: In the shim

01 Jun 2012 08:53
#526265
"leakdown and all valves are leaking"...
With this in mind, with the others 250/255 to start with...

And don't even bother with spining the crank, just remove the camshafts and replacing ALL the shims.
Don't want to bend a valve....
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter

Phoenix, Az

Please Log in or Create an account to join the conversation.

  • APE Jay
  • APE Jay's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: In the shim

01 Jun 2012 21:22
#526339
Put some 200s in it and see how loose that makes it, then do the math.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum