cam tensioner noise

  • jdbusch
  • jdbusch's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 80
  • Thanks: 3

cam tensioner noise

03 Jun 2012 17:01 - 03 Jun 2012 17:05
#526619
so i put an APE KT1100 on my 83 kz1100 and now its making a god awful clicking grinding slapping noise and idle. any ideas? ive tried loosening it tightening it and im lost.

possible hole in guide? bad chain? stupid installer?

sounds like the chain is grinding on the adjuster tip.

HELP
Current:
1983 KZ1100-A3 Shafty

Gone:
1979 KZ1000-E Shafty

Email:
[email protected]
Last edit: 03 Jun 2012 17:05 by jdbusch.

Please Log in or Create an account to join the conversation.

  • APE Jay
  • APE Jay's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: cam tensioner noise

03 Jun 2012 19:01
#526626
The adjuster tip never contacts the chain.

Please Log in or Create an account to join the conversation.

  • wireman
  • wireman's Avatar
  • Offline
  • User
  • User
    Registered
  • The most interesting prick in the world
  • Posts: 4736
  • Thanks: 299

Re: cam tensioner noise

03 Jun 2012 19:36
#526633
Id say try reinstalling it B)
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.

Please Log in or Create an account to join the conversation.

  • jdbusch
  • jdbusch's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 80
  • Thanks: 3

Re: cam tensioner noise

03 Jun 2012 23:41
#526686
i didnt think it did unless the guide was totally shot.

what else could be causing the noise?

wasnt not implying a bad tensioner just waht the noise sounded like
Current:
1983 KZ1100-A3 Shafty

Gone:
1979 KZ1000-E Shafty

Email:
[email protected]

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: cam tensioner noise

03 Jun 2012 23:51
#526690
Is there a stock part missing or incorrectly installed?



Good Fortune! :)
1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

  • wireman
  • wireman's Avatar
  • Offline
  • User
  • User
    Registered
  • The most interesting prick in the world
  • Posts: 4736
  • Thanks: 299

Re: cam tensioner noise

04 Jun 2012 00:03
#526699
Did you turn motor over by hand while tightening it?
Did you remember to have valve cover installed first?
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.

Please Log in or Create an account to join the conversation.

  • jdbusch
  • jdbusch's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 80
  • Thanks: 3

Re: cam tensioner noise

04 Jun 2012 00:40
#526712
yeah valve cover was on. and i turned engine over slowly while i tightened the tensioner to take out slop.

all i did was remove stock auto tensioner and bolt on the APE turned it in by hand until i felt a little tension. then turned engine over checked play, turned over checked play, and so on . once i felt no more play, i tightened the set nut and fired it up then heard the noise.

tried loosing it up a lil with no result so i tried small increments of tightening with no results but at 3000 rpm the noise is gone.
Current:
1983 KZ1100-A3 Shafty

Gone:
1979 KZ1000-E Shafty

Email:
[email protected]

Please Log in or Create an account to join the conversation.

  • wireman
  • wireman's Avatar
  • Offline
  • User
  • User
    Registered
  • The most interesting prick in the world
  • Posts: 4736
  • Thanks: 299

Re: cam tensioner noise

04 Jun 2012 00:43
#526714
Sometimes on a cold motor or one that has carbs out of synch you can here a little cam chain noise which is normal at lower rpms,not saying its definately the case here though.
does it go away after motor warms up a little? B)
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.

Please Log in or Create an account to join the conversation.

  • jdbusch
  • jdbusch's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 80
  • Thanks: 3

Re: cam tensioner noise

04 Jun 2012 01:20 - 04 Jun 2012 01:22
#526724
gets worse nd this is far beyond a little noise its alot
Current:
1983 KZ1100-A3 Shafty

Gone:
1979 KZ1000-E Shafty

Email:
[email protected]
Last edit: 04 Jun 2012 01:22 by jdbusch.

Please Log in or Create an account to join the conversation.

  • wireman
  • wireman's Avatar
  • Offline
  • User
  • User
    Registered
  • The most interesting prick in the world
  • Posts: 4736
  • Thanks: 299

Re: cam tensioner noise

04 Jun 2012 02:20
#526730
Did it make any noise with stock tensioner? B)
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.

Please Log in or Create an account to join the conversation.

  • jdbusch
  • jdbusch's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 80
  • Thanks: 3

Re: cam tensioner noise

04 Jun 2012 07:03
#526739
not near the noie now but the stock tensioner was siezed up
Current:
1983 KZ1100-A3 Shafty

Gone:
1979 KZ1000-E Shafty

Email:
[email protected]

Please Log in or Create an account to join the conversation.

  • wireman
  • wireman's Avatar
  • Offline
  • User
  • User
    Registered
  • The most interesting prick in the world
  • Posts: 4736
  • Thanks: 299

Re: cam tensioner noise

04 Jun 2012 10:19
#526755
time to reinstall :)
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
The following user(s) said Thank You: jdbusch

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum