Too much oil

  • raulfd4
  • raulfd4's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 21
  • Thanks: 0

Too much oil

11 Jun 2012 11:09
#528143
I just did an oil and filter change on my 1980 KZ440. The Clymer manual said to add 3.1 quarts of oil with the new filter. When I first started the bike there was a fair amount of smoke and after riding it around for about 15-20 miles, I noticed that there was some oil leaking from the right side of the engine (along the gaskets on the bottom of the clutch cover and I think a bit from up near the cylinder gaskets (?))

When I saw this I checked the oil level and it indicates that there is too much oil. I plan on taking some out this afternoon. Two questions:

1) What is the best method to remove oil and make sure you haven't taken out too much? I was thinking about just putting it up on the center stand, pulling the oil drain plug, and keeping an eye on the oil level window until it reached the right spot. Otherwise it seems like it will be a messy trial-and-error type of job.

2) I'm afraid I may have compromised those seals/gaskets by riding around with too much oil. Do you think they are permanently damaged, or once the oil pressure goes down after taking some oil out, I should be okay?
1980 Kawasaki KZ440A

Please Log in or Create an account to join the conversation.

  • Motor Head
  • Motor Head's Avatar
  • Offline
  • User
  • User
    Registered
  • FIX UP YOUR BIKE RIGHT AND CHEAP
  • Posts: 5137
  • Thanks: 393

Re: Too much oil

11 Jun 2012 11:12
#528144
Drain some out via the drain plug and get it to just above center of the sight glass when on the center stand. Then clean up the leaking area, and take it for a ride. See if it leaks. If so then you will have to repair those seals/ gaskets that are leaking.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf

Please Log in or Create an account to join the conversation.

  • 650ed
  • 650ed's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 15334
  • Thanks: 2832

Re: Too much oil

11 Jun 2012 11:42
#528149
Stick a piece of clear plastic tubing in the filler hole and siphon some out.
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

  • loudhvx
  • loudhvx's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 10863
  • Thanks: 1622

Re: Too much oil

11 Jun 2012 13:44
#528177
You can get something like this at most drug stores. I get mine dirt cheap at American Science and Surplus. Very handy to have a few of them around.

Please Log in or Create an account to join the conversation.

  • mtkawboy
  • mtkawboy's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 822
  • Thanks: 16

Re: Too much oil

11 Jun 2012 17:37
#528219
Do your checking with the oil hot too
78-KZ1000/1105, 80 KZ1000, 82 Kawasaki GPZ750, 95 Harley Fatboy, 80 Suzuki GS1100ET, 81 GS1100E parts bike, 83 GS1100SD Katana/1394,78 Yamaha XT500, 81 Yamaha XS650, 78 Yamaha XS650E, 48 Whizzer model J motorbike, 71 Honda CT70H, 71 Honda CT70, 81 IT 250 Yamaha,82 Honda XL100S owned

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum