83 KZ440 Clutch Cable
- stevendhall
-
Topic Author
- Offline
- User
-

Registered
- Posts: 1
- Thanks: 0
83 KZ440 Clutch Cable
11 Jun 2012 13:35
I recently bought a 1983 KZ440. After putting a new battery in it, it runs very well. However, The clutch cable was very loose and did not engage the clutch. I adjusted the cable as far out as it would go at the center adjuster and at the lever. While this did take the slack out, it made the lever difficult to pull and the clutch is still not engaging. Any suggestions?
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: 83 KZ440 Clutch Cable
11 Jun 2012 18:20
Perhaps a clutch push-rod adjustment is needed.
Links to more info:
www.armbell.com/forum/index.php?c=6&sid=...571a51a&mforum=kz400
www.kz400.com/
home.comcast.net/~loudgpz/GPZweb/Mnls/Mnls.html
Good Fortune!
Links to more info:
www.armbell.com/forum/index.php?c=6&sid=...571a51a&mforum=kz400
www.kz400.com/
home.comcast.net/~loudgpz/GPZweb/Mnls/Mnls.html
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
