Help-kz1000 head gasket replacement
- vintkaw77
-
Topic Author
- Offline
- User
-

Registered
- Posts: 8
- Thanks: 0
Help-kz1000 head gasket replacement
15 Jun 2012 14:18
I wanted to replace the head gasket on my 77 kz1000. when I remove the head nuts and removed the head the cylinder gasket seeped oil but did not totally unseat. Do I need to take the cylinder head(having to reinstall pitstons)off as well and replace the base gasket or is there a chance it will reseal when I put the head back on?
Please Log in or Create an account to join the conversation.
- Street Fighter LTD
-
- Offline
- Moderator
-

Registered
- TURBO, Its Better to be Blown than Injected
- Posts: 5192
- Thanks: 2340
Re: Help-kz1000 head gasket replacement
15 Jun 2012 14:29
Do you like to gamble ???
Do you feel Lucky ???
50/50 odds
I say replace it , but I like to error on the side of caution.
Do you feel Lucky ???
50/50 odds
I say replace it , but I like to error on the side of caution.
Original owner 78 1000 LTD
Mr Turbo Race Kit, MTC 1075 Turbo pistons by PitStop Performance , Falicon Ultra Lite Super Crank, APE everything. Les Holt @ PDM's Billet Goodies . Frame by Chuck Kurzawa @ Logghe Chassis . Deep sump 5qt oil pan. RIP Bill Hahn
The following user(s) said Thank You: wireman
Please Log in or Create an account to join the conversation.
- vintkaw77
-
Topic Author
- Offline
- User
-

Registered
- Posts: 8
- Thanks: 0
Please Log in or Create an account to join the conversation.
- Street Fighter LTD
-
- Offline
- Moderator
-

Registered
- TURBO, Its Better to be Blown than Injected
- Posts: 5192
- Thanks: 2340
Re: Help-kz1000 head gasket replacement
15 Jun 2012 17:01
If it wasnt for Luck I wouldnt be here to type this. LOL :laugh: :woohoo: :lol:
But I would still replace the base gasket
But I would still replace the base gasket
Original owner 78 1000 LTD
Mr Turbo Race Kit, MTC 1075 Turbo pistons by PitStop Performance , Falicon Ultra Lite Super Crank, APE everything. Les Holt @ PDM's Billet Goodies . Frame by Chuck Kurzawa @ Logghe Chassis . Deep sump 5qt oil pan. RIP Bill Hahn
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Help-kz1000 head gasket replacement
15 Jun 2012 19:07:laugh: :laugh: :laugh: :laugh: :laugh:Street Fighter LTD wrote: If it wasnt for Luck I wouldnt be here to type this. LOL :laugh: :woohoo: :lol:
But I would still replace the base gasket
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
The following user(s) said Thank You: Street Fighter LTD
Please Log in or Create an account to join the conversation.
- Samwell
-
- Offline
- User
-

Registered
- Posts: 260
- Thanks: 1
Re: Help-kz1000 head gasket replacement
16 Jun 2012 11:36vintkaw77 wrote: I wanted to replace the head gasket on my 77 kz1000. when I remove the head nuts and removed the head the cylinder gasket seeped oil but did not totally unseat. Do I need to take the cylinder head(having to reinstall pitstons)off as well and replace the base gasket or is there a chance it will reseal when I put the head back on?
I've gotten away with it on an old Honda CB650. My mechanic at the time told me if its not disturbed at all then you're usually (75-80%) okay. If you think its disturbed at all, change and save the grief....
Sam
--
Current Rides: 2013 BMW R1200GSW, 1972 BMW R75/5
Current Project: 1978 KZ1000A2: Supercrank'd by Falicon, APE studs and nuts, Dyna Green coils, powder coated frame and fenders, Stainless brake lines, dual front discs, pods, Kerker Exhaust, 1075cc with JE pistons
Current Rides: 2013 BMW R1200GSW, 1972 BMW R75/5
Current Project: 1978 KZ1000A2: Supercrank'd by Falicon, APE studs and nuts, Dyna Green coils, powder coated frame and fenders, Stainless brake lines, dual front discs, pods, Kerker Exhaust, 1075cc with JE pistons
Please Log in or Create an account to join the conversation.
- RonKZ650
-
- Offline
- User
-

Registered
- Posts: 3719
- Thanks: 252
Re: Help-kz1000 head gasket replacement
16 Jun 2012 11:54
Just remember if you remove the cylinder, the rings will never seat again, so you'll need new rings and a hone. I'd rather have a small oil leak than go though putting the base gasket on and all the grief and money.
321,000 miles on KZ's that I can remember. Not going to see any more.
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Help-kz1000 head gasket replacement
16 Jun 2012 13:10
its a good excuse to check/fix all those other things while youre in there.
Its been my experiance anytime you replace a head gasket or do a valve job on a questionable motor that shortly there after lose rings will rear their ugly heads,so why not just check things since youre in there?
Its been my experiance anytime you replace a head gasket or do a valve job on a questionable motor that shortly there after lose rings will rear their ugly heads,so why not just check things since youre in there?
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
The following user(s) said Thank You: geroom
Please Log in or Create an account to join the conversation.
- mtkawboy
-
- Offline
- User
-

Registered
- Posts: 822
- Thanks: 16
Re: Help-kz1000 head gasket replacement
16 Jun 2012 14:29
If it hadnt seeped Id go for it but since it did you better change it. If you leave then undisturbed they will be OK
78-KZ1000/1105, 80 KZ1000, 82 Kawasaki GPZ750, 95 Harley Fatboy, 80 Suzuki GS1100ET, 81 GS1100E parts bike, 83 GS1100SD Katana/1394,78 Yamaha XT500, 81 Yamaha XS650, 78 Yamaha XS650E, 48 Whizzer model J motorbike, 71 Honda CT70H, 71 Honda CT70, 81 IT 250 Yamaha,82 Honda XL100S owned
Please Log in or Create an account to join the conversation.
- vintkaw77
-
Topic Author
- Offline
- User
-

Registered
- Posts: 8
- Thanks: 0
Re: Help-kz1000 head gasket replacement
16 Jun 2012 18:16
Even though this 1075 cc bored out motor only has less than a thousand miles on it, the piston rings wont re-seat? Why it has a leak just bad luck when the builder installed the gasket. So now im going to do it! Let me know what u think.
Please Log in or Create an account to join the conversation.
- APE Jay
-
- User
-

Public
- Thanks: 0
Please Log in or Create an account to join the conversation.
- vintkaw77
-
Topic Author
- Offline
- User
-

Registered
- Posts: 8
- Thanks: 0
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
