If it isn'r one thing it's another!
- badrhino
-
Topic Author
- Offline
- User
-

Registered
- Posts: 554
- Thanks: 6
If it isn'r one thing it's another!
18 Jun 2012 16:00
So.....there I was, got my valves adjusted and put the valve cover back on. I go to put my spring and cap back on the cam chain tensioner and am tightening it up and *SNAP* just broke the threads or something off if it. Are you kidding me? I don't think this bike wants to get back on the road. Where can a guy find a good cheap cam chain tensioner?
Should I go stock or aftermarket?
It is for a KZ1000J motor.
Should I go stock or aftermarket?
It is for a KZ1000J motor.
1980 KZ1000 with a 1982 KZ1000J motor with 1100 pistons and heads, Vance & Hines, 29MM Smooth Bores, Work in Progress
Franken Z!
Franken Z!
Please Log in or Create an account to join the conversation.
- Powerstroke_fan
-
- Offline
- User
-

Registered
- Posts: 1020
- Thanks: 90
Re: If it isn'r one thing it's another!
18 Jun 2012 17:56 - 18 Jun 2012 17:57
you can buy the aftermarket ones decently cheap. And also depends on if you can remember to check it and adjust it properly. Dont want the cam chain getting loose and blowing up the motor. I know you could get some off ebay and probably z1 enterprises.
1977 KZ 1000 work in progress
Last edit: 18 Jun 2012 17:57 by Powerstroke_fan.
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: If it isn'r one thing it's another!
18 Jun 2012 20:22 - 18 Jun 2012 20:22
"just broke the threads or something off if it."... Image...?
What exactly broke...?
A: Two bolts securing the tensioner into the head...
B: Bolt that holds the spring loaded tensioner bolt into head/chain...
If B, you can always tap it out for a bigger bolt for locking into position...
Or you can drill and tap on the end like after market tensioners...
Or get a new after market tensioner (APE, Z1, American Classix etc...)
What exactly broke...?
A: Two bolts securing the tensioner into the head...
B: Bolt that holds the spring loaded tensioner bolt into head/chain...
If B, you can always tap it out for a bigger bolt for locking into position...
Or you can drill and tap on the end like after market tensioners...
Or get a new after market tensioner (APE, Z1, American Classix etc...)
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Last edit: 18 Jun 2012 20:22 by Old Man Rock.
Please Log in or Create an account to join the conversation.
- oldkaws4ever
-
- Offline
- User
-

Registered
- Have no regrets...... You only live once.
- Posts: 1639
- Thanks: 12
Re: If it isn'r one thing it's another!
18 Jun 2012 20:23
I have an ape manual cam chain adjuster on my z1 I bought it at z1 enterprises and it was the best thing I've bought for it.
74 Z1a 900 (Apart and making it better than ever)
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: If it isn'r one thing it's another!
18 Jun 2012 20:51
Hey Jim
Did they provide instructions for adjusting and if so, accurate...?
Did they provide instructions for adjusting and if so, accurate...?
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- oldkaws4ever
-
- Offline
- User
-

Registered
- Have no regrets...... You only live once.
- Posts: 1639
- Thanks: 12
Re: If it isn'r one thing it's another!
18 Jun 2012 21:38
It was just like the factory one, then you turn the bolt till its semi tight and back it out 1/4 turn and tighten the nut.
74 Z1a 900 (Apart and making it better than ever)
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois
Please Log in or Create an account to join the conversation.
- badrhino
-
Topic Author
- Offline
- User
-

Registered
- Posts: 554
- Thanks: 6
Re: If it isn'r one thing it's another!
18 Jun 2012 22:10
It was (
:whistle: lol
The spring holder thingy majiggy on the side.
See illustration.
The spring holder thingy majiggy on the side.
See illustration.
1980 KZ1000 with a 1982 KZ1000J motor with 1100 pistons and heads, Vance & Hines, 29MM Smooth Bores, Work in Progress
Franken Z!
Franken Z!
Please Log in or Create an account to join the conversation.
- badrhino
-
Topic Author
- Offline
- User
-

Registered
- Posts: 554
- Thanks: 6
Re: If it isn'r one thing it's another!
18 Jun 2012 22:10 - 18 Jun 2012 22:11
1980 KZ1000 with a 1982 KZ1000J motor with 1100 pistons and heads, Vance & Hines, 29MM Smooth Bores, Work in Progress
Franken Z!
Franken Z!
Last edit: 18 Jun 2012 22:11 by badrhino.
Please Log in or Create an account to join the conversation.
- badrhino
-
Topic Author
- Offline
- User
-

Registered
- Posts: 554
- Thanks: 6
Re: If it isn'r one thing it's another!
19 Jun 2012 00:31
Yes, after further inspection the cap definitely snapped the threads off of the tensioner body. It looks like it is made out of pot metal.
1980 KZ1000 with a 1982 KZ1000J motor with 1100 pistons and heads, Vance & Hines, 29MM Smooth Bores, Work in Progress
Franken Z!
Franken Z!
Please Log in or Create an account to join the conversation.
- gpz1170
-
- Offline
- User
-

Registered
- Posts: 124
- Thanks: 10
Re: If it isn'r one thing it's another!
19 Jun 2012 14:40
should have one of those lying around, if so you can have it. I always use the manual adjuster
don
don
1974 Z1
1976 KZ900
1978 KZ1000
1981 KZ1000
1983 GPZ1100
1976 KZ900
1978 KZ1000
1981 KZ1000
1983 GPZ1100
Please Log in or Create an account to join the conversation.
- badrhino
-
Topic Author
- Offline
- User
-

Registered
- Posts: 554
- Thanks: 6
Re: If it isn'r one thing it's another!
19 Jun 2012 17:13
I ordered a used one off of fee-bay already. Thanks!
I really don't even see how these things tension the chain the way they are set up. :blink:
I really don't even see how these things tension the chain the way they are set up. :blink:
1980 KZ1000 with a 1982 KZ1000J motor with 1100 pistons and heads, Vance & Hines, 29MM Smooth Bores, Work in Progress
Franken Z!
Franken Z!
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: If it isn'r one thing it's another!
19 Jun 2012 22:11
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
