Mechanical eye candy

  • Roadflyer
  • Roadflyer's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 157
  • Thanks: 13

Mechanical eye candy

22 Jun 2012 11:12
#530990

Attachment kzmotor001.JPG not found


When I bought this bike a couple months ago it showed all of it 32 years of age. The PO had even used a nylon scuff pad on a die grinder to clean up the covers ( scratched the crap out of them), followed by a gloss black touch up with overspray everywhere.
It has a newly installed 1045 kit and valve job, but I found the cam timing to be off 1 tooth on the intake with 1 valve on the tight side and 1 too loose by 1 shim size. Compression is an even 180 on all 4 now.
I sand blasted the engine and painted it with PJ1 satin black engine paint and polished all the covers. I am very pleased with the way it turned out. The frame is all stripped down/ sandblasted and ready for paint.
1979 kz1000 shaftie rebuild project
1045 wiseco 10.25-1 pistons
Kenny Harmon 380 lift cams

Please Log in or Create an account to join the conversation.

  • redneckcarrow
  • redneckcarrow's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 49
  • Thanks: 1

Re: Mechanical eye candy

22 Jun 2012 11:19
#530991
VERY SWEET
1980 kz 550 ltd stock
The following user(s) said Thank You: Roadflyer

Please Log in or Create an account to join the conversation.

  • Street Fighter LTD
  • Street Fighter LTD's Avatar
  • Offline
  • Moderator
  • Moderator
    Registered
  • TURBO, Its Better to be Blown than Injected
  • Posts: 5192
  • Thanks: 2339

Re: Mechanical eye candy

22 Jun 2012 11:45
#530996
Looks like the build is going to be very nice !!

Original owner 78 1000 LTD
Mr Turbo Race Kit, MTC 1075 Turbo pistons by PitStop Performance , Falicon Ultra Lite Super Crank, APE everything. Les Holt @ PDM's Billet Goodies . Frame by Chuck Kurzawa @ Logghe Chassis . Deep sump 5qt oil pan. RIP Bill Hahn
The following user(s) said Thank You: Roadflyer

Please Log in or Create an account to join the conversation.

  • wireman
  • wireman's Avatar
  • Offline
  • User
  • User
    Registered
  • The most interesting prick in the world
  • Posts: 4736
  • Thanks: 299

Re: Mechanical eye candy

22 Jun 2012 11:47
#530997

Attachment quag_2012-06-22.jpg not found


B)
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
The following user(s) said Thank You: Roadflyer

Please Log in or Create an account to join the conversation.

  • damarble
  • damarble's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 264
  • Thanks: 13

Re: Mechanical eye candy

22 Jun 2012 12:18 - 22 Jun 2012 12:18
#531003
Sooo... :whistle: Where do you live and what time do you leave for work?
Go green, buy a Kawasaki!

82 KZ750M CSR Build Thread

89 ZX600C Streetfighter
Last edit: 22 Jun 2012 12:18 by damarble.
The following user(s) said Thank You: Roadflyer

Please Log in or Create an account to join the conversation.

  • Roadflyer
  • Roadflyer's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 157
  • Thanks: 13

Re: Mechanical eye candy

23 Jun 2012 00:13
#531141
Thanks for the compliments. I'll post other pics of the build as I get into it. I will probably paint the frame soon and leave the rest for winter.
1979 kz1000 shaftie rebuild project
1045 wiseco 10.25-1 pistons
Kenny Harmon 380 lift cams

Please Log in or Create an account to join the conversation.

  • martin_csr
  • martin_csr's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7993
  • Thanks: 1648

Re: Mechanical eye candy

23 Jun 2012 02:05 - 22 Jan 2013 20:06
#531164
.
Last edit: 22 Jan 2013 20:06 by martin_csr.

Please Log in or Create an account to join the conversation.

  • Kitten Tooth
  • Kitten Tooth's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 743
  • Thanks: 10

Re: Mechanical eye candy

23 Jun 2012 04:42
#531180
is it.. edible? hahhaaa damn.
1981 Kawasaki KZ1000-K LTD
1983 Suzuki GS300L-D
1982 Suzuki GS300L-Z sold:(
1976 KZ400D3
1973 Z900... I WISH

DO A BARREL ROLL!!

Please Log in or Create an account to join the conversation.

  • LarryC
  • LarryC's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1241
  • Thanks: 309

Re: Mechanical eye candy

23 Jun 2012 07:36
#531181
Roadflyer wrote:

Attachment kzmotor001.JPG not found


When I bought this bike a couple months ago it showed all of it 32 years of age. The PO had even used a nylon scuff pad on a die grinder to clean up the covers ( scratched the crap out of them), followed by a gloss black touch up with overspray everywhere.
It has a newly installed 1045 kit and valve job, but I found the cam timing to be off 1 tooth on the intake with 1 valve on the tight side and 1 too loose by 1 shim size. Compression is an even 180 on all 4 now.
I sand blasted the engine and painted it with PJ1 satin black engine paint and polished all the covers. I am very pleased with the way it turned out. The frame is all stripped down/ sandblasted and ready for paint.

That looks GREAT! :)
Larry C.

Please Log in or Create an account to join the conversation.

  • Old Man Rock
  • Old Man Rock's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6071
  • Thanks: 225

Re: Mechanical eye candy

23 Jun 2012 10:23
#531209
"Where do you live and what time do you leave for work?"... :laugh: :laugh: :laugh:

Schwiiiiiiiiiiiiiiiiiiiiing! B)
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter

Phoenix, Az

Please Log in or Create an account to join the conversation.

  • Gabe42
  • Gabe42's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 11
  • Thanks: 0

Re: Mechanical eye candy

06 Feb 2013 00:40
#570993
That is just simply BEAUTIFUL! There is nothing like the Dual Over Head Cam Engines

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum