Piston Rings for kz750 b4
- Pop147
-
Topic Author
- Offline
- User
-

Registered
- Posts: 45
- Thanks: 0
Piston Rings for kz750 b4
25 Jun 2012 18:52
Dose anyone know a place to get some piston rings for a 1979 kz 750 b4?
I just got the case split and was going over the parts and found that the oil ring for the left side piston is cracked.
I just got the case split and was going over the parts and found that the oil ring for the left side piston is cracked.
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: Piston Rings for kz750 b4
26 Jun 2012 03:36 - 26 Jun 2012 03:38
No eBay APP ID and/or Cert ID defined in Kunena configurationI see them cheap on ebay often. Kawi rings came in three sizes: stock, +0.50mm over, and 1.0 mm over. The aftermarket ones came in 0.25, 0.50, 0.75, and 1.0mm over. be sure to get the size you need.
Shame that cyclewarebales.com recently stopped carrying them. They had OEM piston/ring/pin sets for $36 each in all four sizes. I used them to rebuild my 750 twin, but they no longer list them.
Shame that cyclewarebales.com recently stopped carrying them. They had OEM piston/ring/pin sets for $36 each in all four sizes. I used them to rebuild my 750 twin, but they no longer list them.
1979 KZ-750 Twin
Last edit: 26 Jun 2012 03:38 by bountyhunter.
Please Log in or Create an account to join the conversation.
- Pop147
-
Topic Author
- Offline
- User
-

Registered
- Posts: 45
- Thanks: 0
Re: Piston Rings for kz750 b4
26 Jun 2012 12:06
Im guessing i will need stock but how will i know.
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: Piston Rings for kz750 b4
26 Jun 2012 15:52
Read the top of the piston, it should be stamped on it. Also can measure the bore if you have the tool.
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
- Pop147
-
Topic Author
- Offline
- User
-

Registered
- Posts: 45
- Thanks: 0
Re: Piston Rings for kz750 b4
26 Jun 2012 20:29
I guess while i have you interested ill ask about the piston wear. How do theses look?
Please Log in or Create an account to join the conversation.
- adam90xj
-
- Offline
- User
-

Registered
- Posts: 18
- Thanks: 0
Re: Piston Rings for kz750 b4
26 Jun 2012 21:10
Only way to know is to measure them. You can pick up a digital caliper for cheap now-a-days to measure the piston. If you don't have the tools you could always swing by the local machinist and ask them to measure the pistons and bores.
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: Piston Rings for kz750 b4
26 Jun 2012 21:58 - 26 Jun 2012 21:59
I can't tell wear from a picture. The scuffed sides don't look good to me.
If I was going to put the work into the engine, I would at least buy those two new standard piston/ring sets listed on ebay for $50 and have the cylinders honed enough to deglaze them and install new standard pistons and rings (assuming cylinder wear is minimal). Need to measure cylinders to know.
If I was going to put the work into the engine, I would at least buy those two new standard piston/ring sets listed on ebay for $50 and have the cylinders honed enough to deglaze them and install new standard pistons and rings (assuming cylinder wear is minimal). Need to measure cylinders to know.
1979 KZ-750 Twin
Last edit: 26 Jun 2012 21:59 by bountyhunter.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
