75 KZ400 valve adjustment nut problems

  • oldkaws4ever
  • oldkaws4ever's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Have no regrets...... You only live once.
  • Posts: 1639
  • Thanks: 12

75 KZ400 valve adjustment nut problems

01 Jul 2012 21:36
#533209
Okay, so i have been working on this 75 kz 400 for a while, i adjusted the valves on it and got it running sweet. However 2 days later i started hearing the rocker arms chattering a lot on the right side, so i pulled the inspection cover off above the spark plug, i found the nut that holds the adjustment screw for the exhaust valve backed all the way off. So i reset that valve and tightened the nut. At the same time i went over the other 3 with a wrench to make sure they were tight and they were. Fast forward to today, the rocker arm chatter was back, this time the nut for the adjustment of the intake valve was backed off. What gives? Why do these nuts keep backing off? Im out of ideas.
74 Z1a 900 (Apart and making it better than ever)
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois

Please Log in or Create an account to join the conversation.

  • Nebr_Rex
  • Nebr_Rex's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1889
  • Thanks: 295

Re: 75 KZ400 valve adjustment nut problems

01 Jul 2012 22:25
#533217
Old?
Try a hardend lock washer?
2002 ZRX1200R
81 GPz1100
79 KZ1000st daily ride
79 KZ1000mk2 prodject
78 KZ650sr
78 KZ650b
81 KZ750e
80 KZ750ltd
77 KZ400/440 cafe project
76 KZ400/440 Fuel Injected

www.dotheton.com/index.php?threads/dr-je...air-of-kz400s.39120/


.

Please Log in or Create an account to join the conversation.

  • oldkaws4ever
  • oldkaws4ever's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Have no regrets...... You only live once.
  • Posts: 1639
  • Thanks: 12

Re: 75 KZ400 valve adjustment nut problems

01 Jul 2012 22:28
#533218
i was honestly wondering if there should be a lock washer behind there. It would make sense if there was one This bike has 4900 miles on it with no evidence of being tampered with.
74 Z1a 900 (Apart and making it better than ever)
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois

Please Log in or Create an account to join the conversation.

  • faffi
  • faffi's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 554
  • Thanks: 36

Re: 75 KZ400 valve adjustment nut problems

02 Jul 2012 05:23
#533266
No, no lock washer needed. Do you have a torque wrench for small work? I suspect you under-torque the lock nuts since they come adrift, but OTOH you do not want to overtighten them, either.
1977 KZ650B1
1980 F1 engine
B1 3-phase alternator
B1 Points ignition

Please Log in or Create an account to join the conversation.

  • oldkaws4ever
  • oldkaws4ever's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Have no regrets...... You only live once.
  • Posts: 1639
  • Thanks: 12

Re: 75 KZ400 valve adjustment nut problems

02 Jul 2012 15:14
#533380
Nope, i have a torque wrench for small work, they were tightened to spec every time.
74 Z1a 900 (Apart and making it better than ever)
77 Kz 650b (Threw a rod, going to sandwich in a 900 or 1000 motor)
76 Kz 400d
05 ninja zx-636
81 Kz 750 Ltd
Darien, Illinois

Please Log in or Create an account to join the conversation.

  • faffi
  • faffi's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 554
  • Thanks: 36

Re: 75 KZ400 valve adjustment nut problems

02 Jul 2012 17:03
#533403
Sounds weird. I would try to raise your question here www.armbell.com/kz400/index.php?sid=de02...04a66fc&mforum=kz400
1977 KZ650B1
1980 F1 engine
B1 3-phase alternator
B1 Points ignition
The following user(s) said Thank You: oldkaws4ever

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum