84 KZ550 Oil Plug Spinning
- acidone
-
Topic Author
- Offline
- User
-

Registered
- 84 KZ550
- Posts: 4
- Thanks: 0
84 KZ550 Oil Plug Spinning
06 Jul 2012 23:07
Hey Gang, I'm having an issue after a recent oil/filter change; when I would go over large bumps or rail road tracks my Oil Light would flicker on and off. It didn't do that before the change. I used the correct amounts of oil for a filter change and used 10w40 in the bike. So after reading around I thought I would drain it again and go up to a 20w50 and replace the filter again.
My problem is when I try to unscrew the oil drain plug it just spins like maybe its on a bad thread or something? I didn't try to much because I didn't want to make matters worse. It's not leaking any fluids atm. So what do I do to get this bolt out, suggestions? Or could I let it drain by removing the filter and replacing it, which i intended to do anyway.
Thanks,
-A
My problem is when I try to unscrew the oil drain plug it just spins like maybe its on a bad thread or something? I didn't try to much because I didn't want to make matters worse. It's not leaking any fluids atm. So what do I do to get this bolt out, suggestions? Or could I let it drain by removing the filter and replacing it, which i intended to do anyway.
Thanks,
-A
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: 84 KZ550 Oil Plug Spinning
07 Jul 2012 00:39 - 07 Jul 2012 08:26acidone wrote: ...having an issue after a recent oil/filter change; when I would go over large bumps or rail road tracks my Oil Light would flicker on and off. It didn't do that before the change. I used the correct amounts of oil for a filter change and used 10w40 in the bike. So after reading around I thought I would drain it again and go up to a 20w50 and replace the filter again.
My problem is when I try to unscrew the oil drain plug it just spins like maybe its on a bad thread or something? I didn't try to much because I didn't want to make matters worse. It's not leaking any fluids atm. So what do I do to get this bolt out, suggestions? Or could I let it drain by removing the filter and replacing it, which i intended to do anyway....
Likely that the female threads in the oil pan drain plug hole are partially stripped, and the drain plug's male threads are likely undamaged.
Am doubtful that a new drain plug would be of any help, and suspect that it would probably also spin just like the existing plug screw.
Would repair to achieve a tight fitting drain plug.
One option is to replace the plug with a larger self-tapping drain plug, which may be available at a local automotive supply such as AutoZone or NAPA.
Another option would be to replace the oil pan.
Used oil pans are available and relatively inexpensive.
Oil plug fitment isn't related to function of the oil pressure warning light, unless enough oil leaks out to activate the light.
Would suspect loose or dirty (corroded) wire connections at the oil pressure switch might be causing the oil light to flicker.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Last edit: 07 Jul 2012 08:26 by Patton.
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: 84 KZ550 Oil Plug Spinning
07 Jul 2012 01:52
Remove the oil pan and get bolt hole fixed or find differant pan
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: 84 KZ550 Oil Plug Spinning
07 Jul 2012 08:57Rendering Error in layout Message/Item: Kunena\Forum\Libraries\BBCode\KunenaBBCodeLibrary::renderEbayLayout(): Argument #1 ($ItemID) must be of type int, string given, called in /home/kzride5/public_html/libraries/kunena/src/BBCode/KunenaBBCode.php on line 319. Please enable debug mode for more information.
Please Log in or Create an account to join the conversation.
- pete greek1
-
- Offline
- User
-

Registered
- Posts: 1510
- Thanks: 185
Re: 84 KZ550 Oil Plug Spinning
07 Jul 2012 12:33
it happened to my 650 years ago, I drove it to a local motorcycle shop, & they helix coiled it for about 40.00,piced it up the same day...Pete
1980 LTD 1000..,1976 LTD 900, have the 1000&900 now. the rest are previous= 1978 KZ 650 B.., 1980 Yamaha XT 500..,1978 Yamaha DT 400.., 1977 Yamaha yz 80..,Honda trail ct 70.., Honda QA 50...5-1/2 hp brigs & straton CAT chopper mini bike...3-1/2 hp mini bike (WHEN GAS WAS ABOUT 45 CENTS A GALLON)!!!!
Please Log in or Create an account to join the conversation.
- loudhvx
-
- Offline
- KZr Legend
-

Registered
- Posts: 10863
- Thanks: 1622
Re: 84 KZ550 Oil Plug Spinning
07 Jul 2012 12:46 - 07 Jul 2012 12:47
Dropping the filter won't necessarily drain the oil. I've removed filters without the oil draining out (to replace a leaking seal). Maybe if I waited for days.
There are siphon gadgets that will such the oil out through the filler.
But you really should fix/replace oil pan as others said.
Also, you may want to try a new oil pressure switch before switching to higher viscosity oil. Or play with the wiring like Patton said.
There are siphon gadgets that will such the oil out through the filler.
But you really should fix/replace oil pan as others said.
Also, you may want to try a new oil pressure switch before switching to higher viscosity oil. Or play with the wiring like Patton said.
1981 KZ550 D1 gpz.
Kz550 valve train warning.
Other links.
Kz550 valve train warning.
Other links.
Last edit: 07 Jul 2012 12:47 by loudhvx.
Please Log in or Create an account to join the conversation.
- acidone
-
Topic Author
- Offline
- User
-

Registered
- 84 KZ550
- Posts: 4
- Thanks: 0
Re: 84 KZ550 Oil Plug Spinning
08 Jul 2012 16:57
Thanks for the suggestions! I'm going to give a couple of shops around my area a call see if I can get them to do something similar to what pete greek suggested. If not then I will purchase a new gasket set and drop the oil pan remove the screw and re-tap it myself.
-A
-A
Please Log in or Create an account to join the conversation.
- martin_csr
-
- Offline
- User
-

Registered
- Posts: 7993
- Thanks: 1648
Re: 84 KZ550 Oil Plug Spinning
08 Jul 2012 17:02 - 22 Jan 2013 20:48
never mind already answered
Last edit: 22 Jan 2013 20:48 by martin_csr.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
