had floats set and benched sinicized
- zig
-
Topic Author
- Offline
- User
-

Registered
- Posts: 62
- Thanks: 1
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: had floats set and benched sinicized
17 Jul 2012 22:04
If you don't set floats with a clear tube, they are guaranteed to be wrong.
Popping means too lean, fuel levels are probably low.
Popping means too lean, fuel levels are probably low.
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
- zig
-
Topic Author
- Offline
- User
-

Registered
- Posts: 62
- Thanks: 1
Re: had floats set and benched sinicized
18 Jul 2012 17:51
ok ill do the clear tube but does that mean i got to resinicize carbs
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: had floats set and benched sinicized
18 Jul 2012 18:11 - 18 Jul 2012 18:37
You mentioned that you bench synched the carbs. Please explain what you did. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Last edit: 18 Jul 2012 18:37 by 650ed.
Please Log in or Create an account to join the conversation.
- zig
-
Topic Author
- Offline
- User
-

Registered
- Posts: 62
- Thanks: 1
Re: had floats set and benched sinicized
18 Jul 2012 18:26
i took it to a carb shop and he did it but when im on it runs smoth but it dies out when on fuel on on pprim it dont well it does but not as offen i should have left it alone grrr
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: had floats set and benched sinicized
18 Jul 2012 18:46zig wrote: i took it to a carb shop and he did it but when im on it runs smoth but it dies out when on fuel on on pprim it dont well it does but not as offen i should have left it alone grrr
If they did not use the clear tube method to check the fuel level and then synch the carbs properly with the engine running both the fuel level and the carb synch may be off. As Bountyhunter said, setting the floats dry is not accurate, neither is "bench synching" the carbs. BTW, what do you mean by a "carb shop"? Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Please Log in or Create an account to join the conversation.
- zig
-
Topic Author
- Offline
- User
-

Registered
- Posts: 62
- Thanks: 1
Re: had floats set and benched sinicized
18 Jul 2012 20:50
theirs a carb shop in my town all he does is carbs clean rebuild any thing to do with a carb it sounds alot better all the tube test come out to good but if i set float like other one if i move that flot to other carb that one will leak so im lost i bought a brand new float and does the same thing i took #3 float put it in Number 4 carb and it leaks but number 3 dont
Please Log in or Create an account to join the conversation.
- zig
-
Topic Author
- Offline
- User
-

Registered
- Posts: 62
- Thanks: 1
Re: had floats set and benched sinicized
19 Jul 2012 21:16
ok took me a while but i got floats st8en out :woohoo: still got a drip on number 3 took needle to bike shop they said its fine so ill deal with the drip its a faint drip but still a drip i ran out of money to spend on this bike so ill wait until winter when i tear it down and clean it up and make some modification he he he but not to many lol im looking for the old style handdle bars low cut ones if any one has any for a good price i can get them on ebay but they want 20.00 to ship them to me and they coast 20.00 brand new lol
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: had floats set and benched sinicized
19 Jul 2012 21:42sounds like petcock is not turning off wellzig wrote: ok took me a while but i got floats st8en out :woohoo: still got a drip on number 3 took needle to bike shop they said its fine so ill deal with the drip its a faint drip but still a drip
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
- zig
-
Topic Author
- Offline
- User
-

Registered
- Posts: 62
- Thanks: 1
Re: had floats set and benched sinicized
19 Jul 2012 21:57
its a vac petcock it drips i belive when im riding it too im lost on this deal lol
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: had floats set and benched sinicized
20 Jul 2012 02:05Petcocks get crappy with age and leak gas. Some have rebuild kits.zig wrote: its a vac petcock it drips i belive when im riding it too im lost on this deal lol
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
- peavylotus
-
- Offline
- User
-

Registered
- Movin on up
- Posts: 255
- Thanks: 15
Re: had floats set and benched sinicized
20 Jul 2012 03:48
Popping is rich. KZ's have spark on every Top Dead Center. At the end of the exhaust stroke they will pop if there is still fuel left in the chamber to burn. I honestly think you just need to adjust your fuel mixture screws then sync the carbs, If you have pods and/or a open exhaust than you need to match your Jets accordingly.
You should still adjust your floats with the clear tube, but your floats being adjusted incorrectly does not govern how much fuel goes into the chamber at any given moment. It will either overflow out the carb, or choke the engine of fuel on heavy throttle. It doesn't govern constant mixture.
I am totally open to discussion if anyone disagrees with my logic.
You should still adjust your floats with the clear tube, but your floats being adjusted incorrectly does not govern how much fuel goes into the chamber at any given moment. It will either overflow out the carb, or choke the engine of fuel on heavy throttle. It doesn't govern constant mixture.
I am totally open to discussion if anyone disagrees with my logic.
1980 KZ 1045 LTD Currently Workin' It Out
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
