Baffles or no baffles?
- Calico
-
Topic Author
- Offline
- User
-

Registered
- Posts: 86
- Thanks: 0
Baffles or no baffles?
24 Jul 2012 15:39
Baffles or no baffles? That is the question. But . . . it's baffling. See I always thought that removing baffles wasn't just a sound thing but that it (even in a small measurement) helped. But I just read in someone's discussion that removing baffles is bad for your low to mid. Any opinions?
81' KZ750LTD 4 CYL
82' KZ750LTD 4 CYL
82' KZ750LTD 4 CYL
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Baffles or no baffles?
24 Jul 2012 15:42
Yes it kills off low end torque depending on your combination this can be good or bad
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
The following user(s) said Thank You: Calico
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: Baffles or no baffles?
24 Jul 2012 15:53
Assuming your bike is otherwise stock or tuned for baffles, removing them is not going to add power.
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
The following user(s) said Thank You: Calico
Please Log in or Create an account to join the conversation.
- Calico
-
Topic Author
- Offline
- User
-

Registered
- Posts: 86
- Thanks: 0
Re: Baffles or no baffles?
24 Jul 2012 17:11
Right. I know most people do it for sound but I was concerned about losing power due to a lack of back pressure. Thanx guys! Oh, one other thing. I just rebuilt the starter clutch and installed it. But as I'm installing the clutch I noticed that the the spring bolts require 90" lbs. How important is that? The only reason that I ask is that I'm doing this on a budget and my only "lbs torque wrench starts at 130.
81' KZ750LTD 4 CYL
82' KZ750LTD 4 CYL
82' KZ750LTD 4 CYL
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Baffles or no baffles?
24 Jul 2012 17:14
Thats right between 7-8' lbs by my math,id say put some blue lock tite on them and snug them as tight as you can with a 3/8 drive ratchet while holding it.
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- Calico
-
Topic Author
- Offline
- User
-

Registered
- Posts: 86
- Thanks: 0
Re: Baffles or no baffles?
24 Jul 2012 17:27
I think I understand. Do you mean by hand with the socket only?
81' KZ750LTD 4 CYL
82' KZ750LTD 4 CYL
82' KZ750LTD 4 CYL
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: Baffles or no baffles?
24 Jul 2012 17:32
If you plan to do much of your own work on the bike you may as well plan on getting a more sensitive (smaller scale) torque wrench. Otherwise stripped fasteners and timesert repairs are in your future. I find that my 30-250" lb works very well for all the lighter torque settings. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
The following user(s) said Thank You: Calico
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Baffles or no baffles?
24 Jul 2012 17:33
No with just the 3/8 drive ratchet and socket,no air tools or breaker bars required to reach that amount of torque.
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
The following user(s) said Thank You: Calico
Please Log in or Create an account to join the conversation.
- Calico
-
Topic Author
- Offline
- User
-

Registered
- Posts: 86
- Thanks: 0
Re: Baffles or no baffles?
24 Jul 2012 17:43
Thanks guys!
81' KZ750LTD 4 CYL
82' KZ750LTD 4 CYL
82' KZ750LTD 4 CYL
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
