No compression

  • Sambow614
  • Sambow614's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 8
  • Thanks: 1

No compression

27 Jul 2012 08:29
#538951
So I've been building this bike for about 5 months now and ran into a problem that just stumped me.
I meticulously rebuilt the top end according to all specs and procedures but now only have compression of 55/75/60/50.
The head work was done by a highly reputable machine shop as well as the bore for the bran new 1075 wiesco 10.25/1 compression piston kit. My question is... Before the pistons are broke in/ completely seated/ is it typical to have low compression? The compression test was done with carbs off. (shouldn't matter right?) Any info on what this could be would be great. Any common mistakes I could have made? Thanks
77 kz1000 / zx10

Please Log in or Create an account to join the conversation.

  • Motor Head
  • Motor Head's Avatar
  • Offline
  • User
  • User
    Registered
  • FIX UP YOUR BIKE RIGHT AND CHEAP
  • Posts: 5137
  • Thanks: 393

Re: No compression

27 Jul 2012 09:34 - 29 Jul 2012 20:28
#538965
Camshaft timing. Post your year and model so the correct procedure can be posted, And go back into your user profile and add the bike info to your Signature so it comes up in each post. One of the members will have the info for you. Hopefully you haven't bent the valves, with that low but fairly even compression , i would think it is Off and probably not bent valves.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Last edit: 29 Jul 2012 20:28 by Motor Head.

Please Log in or Create an account to join the conversation.

  • Sambow614
  • Sambow614's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 8
  • Thanks: 1

Re: No compression

29 Jul 2012 20:27
#539452
Sorry, its a 77 kz1000 LTD
77 kz1000 / zx10

Please Log in or Create an account to join the conversation.

  • Motor Head
  • Motor Head's Avatar
  • Offline
  • User
  • User
    Registered
  • FIX UP YOUR BIKE RIGHT AND CHEAP
  • Posts: 5137
  • Thanks: 393

Re: No compression

29 Jul 2012 20:29
#539453
see if this thread helps with the cam timing.
www.kzrider.com/forum/2-engine/445033-79-kz1000-cam-timing-help
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: No compression

29 Jul 2012 20:54
#539462
Check valve clearance if not already done.
1979 KZ-750 Twin

Please Log in or Create an account to join the conversation.

  • LarryC
  • LarryC's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1241
  • Thanks: 309

Re: No compression

29 Jul 2012 21:06
#539464
Sambow614 wrote: So I've been building this bike for about 5 months now and ran into a problem that just stumped me.
I meticulously rebuilt the top end according to all specs and procedures but now only have compression of 55/75/60/50.
The head work was done by a highly reputable machine shop as well as the bore for the bran new 1075 wiesco 10.25/1 compression piston kit. My question is... Before the pistons are broke in/ completely seated/ is it typical to have low compression? The compression test was done with carbs off. (shouldn't matter right?) Any info on what this could be would be great. Any common mistakes I could have made? Thanks

Start with valve lash check and make sure the cams are timed correctly.
Larry C.

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: No compression

30 Jul 2012 02:33
#539514
scary thing is that if the valve timing is off, it can bend the valves so they never seal again. Hope yours didn't.
1979 KZ-750 Twin

Please Log in or Create an account to join the conversation.

  • Ktm181
  • Ktm181's Avatar
  • Offline
  • User
  • User
    Registered
  • Man made it, so Man can fix it
  • Posts: 71
  • Thanks: 1

Re: No compression

30 Jul 2012 03:41 - 30 Jul 2012 03:43
#539517
did you offset the piston ring end gaps? I just did a comp test on mine (Kz900 with Wiseco 1075 10.25 to one pistons) gives just on 200 psi on all 4 after 4000 MILES, i'd also re-test with a second gauge to ensure your gauge is working correctly.
Kt
Last edit: 30 Jul 2012 03:43 by Ktm181.

Please Log in or Create an account to join the conversation.

  • Sambow614
  • Sambow614's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 8
  • Thanks: 1

Re: No compression

30 Jul 2012 19:57
#539613
Yes ring gaps are offset, cam timing was triple checked. I checked the compression with the cams out and just holding tension on the timing chain so as not to bind in the crank case and still the same compression. in the 50s.
I am going to check the valves again via leak test and see what the heck is going on. Thanks again
77 kz1000 / zx10

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: No compression

30 Jul 2012 21:10 - 30 Jul 2012 21:12
#539618
Am maybe missing something, but the valve train should be functioning when the compression test is performed.

The intake valve must open to suck in air which is thereafter compressed during the compression stroke while both valves are closed.

If the intake valve doesn't open, there's no air intake to be compressed.

Good Fortune! :)
1973 Z1
KZ900 LTD
Last edit: 30 Jul 2012 21:12 by Patton.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum