Lost slack in cam chain?

  • Iheartkz
  • Iheartkz's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 10
  • Thanks: 0

Lost slack in cam chain?

31 Jul 2012 16:49
#539787
Ok, so I was putting some new shims in my valves today and as soon as I pulled the idle sprocket off I suddenly lost all the slack in the chain. I then took the tensioner out, but still no avail. I rotated the engine to see if I could get the chain to slacken back up, but no avail. My problem is that there is not enough slack in the chain to seat both cams. Why would I not have enough slack in the chain to put the cams back? Any help would be appreciated.
1978 kz650 B pods kerker 4>1

1979 kz650 B3 pods kerker 4>1 accel pump

Please Log in or Create an account to join the conversation.

  • Powerstroke_fan
  • Powerstroke_fan's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1020
  • Thanks: 90

Re: Lost slack in cam chain?

31 Jul 2012 16:56
#539788
sounds like the timing chain might have came off the crank.
1977 KZ 1000 work in progress

Please Log in or Create an account to join the conversation.

  • Iheartkz
  • Iheartkz's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 10
  • Thanks: 0

Re: Lost slack in cam chain?

31 Jul 2012 17:00
#539789
so I probably just need to keep jiggling it to get it back on?
1978 kz650 B pods kerker 4>1

1979 kz650 B3 pods kerker 4>1 accel pump

Please Log in or Create an account to join the conversation.

  • Powerstroke_fan
  • Powerstroke_fan's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1020
  • Thanks: 90

Re: Lost slack in cam chain?

01 Aug 2012 13:09
#539991
ya
1977 KZ 1000 work in progress
The following user(s) said Thank You: wireman

Please Log in or Create an account to join the conversation.

  • Powerstroke_fan
  • Powerstroke_fan's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1020
  • Thanks: 90

Re: Lost slack in cam chain?

01 Aug 2012 13:13
#539992
and make sure you get your crank back in time.
1977 KZ 1000 work in progress
The following user(s) said Thank You: wireman

Please Log in or Create an account to join the conversation.

  • OldSchoolZ
  • OldSchoolZ's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 217
  • Thanks: 33

Re: Lost slack in cam chain?

01 Aug 2012 15:15
#540013
The old Z's almost have to be straight up and down. If you have a leaning side stand, that can be enough to have the chain slip sideways off the crank gear. Once to get chain aligned correctly, insert exhaust cam first keeping chain tight and so on.....
Remember, don't work on your bike so much you never ride it.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum