Tacho cable still freaking leaking

  • Kawboy74
  • Kawboy74's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 342
  • Thanks: 67

Re: Tacho cable still freaking leaking

09 Aug 2012 23:37
#541651
Have you given any thought to the condition of the shaft on the drive gear itself? I had one that picked up a bit of moisture at some point and as a bit of rust formed near the outside, when I disturbed it leaking followed. Would advise a bit of wet/dry paper on it to smooth it out prior to re-assembly.
David
1974 Z1A As original as I could get it
'88 ZX750R braided lines, mostly original
KZ1000 project on the bench
Burlington,Ontario,Canada

Please Log in or Create an account to join the conversation.

  • Motor Head
  • Motor Head's Avatar
  • Offline
  • User
  • User
    Registered
  • FIX UP YOUR BIKE RIGHT AND CHEAP
  • Posts: 5137
  • Thanks: 393

Re: Tacho cable still freaking leaking

10 Aug 2012 00:13
#541661
Difficult to tell from the picture you posted, but it looks like a gap around the edge of the circumference on the end of where the seal should fit. Are you sure that is Solid Metal? And not some washer put there by a PO? (PO= Previous Owner). Put a small punch in from the engine end of the assy, and drive the seal and what looks like a washer out. Thats what it looks like anyway. If not consider getting another housing assy.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf

Please Log in or Create an account to join the conversation.

  • bluej58
  • bluej58's Avatar
  • Offline
  • User
  • User
    Registered
  • The chrome don't get you home
  • Posts: 2474
  • Thanks: 507

Re: Tacho cable still freaking leaking

10 Aug 2012 00:31 - 10 Aug 2012 07:58
#541666
I just checked to make sure I'm not crazy, it's a rubber seal for sure.

I didn't want to pry it out because I trying to keep the engine closed for cleaning , but it's defiantly rubber and deep too.

Can you fish around underneath the metal face or is it a straight drilled hole ?

JD
78 KZ1000 A2A
Last edit: 10 Aug 2012 07:58 by bluej58.

Please Log in or Create an account to join the conversation.

  • KZ1000inaus
  • KZ1000inaus's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Luminous Red KZ1000 A2
  • Posts: 135
  • Thanks: 4

Re: Tacho cable still freaking leaking

10 Aug 2012 01:43
#541685
Motor Head wrote: Difficult to tell from the picture you posted, but it looks like a gap around the edge of the circumference on the end of where the seal should fit. Are you sure that is Solid Metal? And not some washer put there by a PO? (PO= Previous Owner). Put a small punch in from the engine end of the assy, and drive the seal and what looks like a washer out. Thats what it looks like anyway. If not consider getting another housing assy.

yea sorry about quality but my missus and cameras.. well lets not go there..
I said the same to her so to prove the point she sent a video of her tapping it with a screwdriver and it's definitely metal,
when i get home i'll try prising it out as it could be a PO fitted washer !!
but you can see why i was getting confused! :-)

Please Log in or Create an account to join the conversation.

  • KZ1000inaus
  • KZ1000inaus's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Luminous Red KZ1000 A2
  • Posts: 135
  • Thanks: 4

Re: Tacho cable still freaking leaking

10 Aug 2012 04:29
#541697
yep there was a PO washer installed covering the seal up. it took some prising but it's off
the seal underneath is completely knackered and rock hard, now comes the fun bit of getting that out!
I notice you can buy new kits on ebay for around 30-40 bucks i might have to order one of those as mine's a little bit chewed up.

Please Log in or Create an account to join the conversation.

  • bluej58
  • bluej58's Avatar
  • Offline
  • User
  • User
    Registered
  • The chrome don't get you home
  • Posts: 2474
  • Thanks: 507

Re: Tacho cable still freaking leaking

10 Aug 2012 07:55
#541702
Cool, mystery solved B)

Your housing doesn't look that bad from here :)

If you get a proper O ring for the shaft and are able to pull that seal out safely I think you'll be alright.

You might try smearing a little Permatex black where the seal meets the wall of the housing and press it in.

Then again it would be a drag to have to mess with it any more so it's your call.


Good luck

JD
78 KZ1000 A2A

Please Log in or Create an account to join the conversation.

  • pete greek1
  • pete greek1's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1510
  • Thanks: 185

Re: Tacho cable still freaking leaking

10 Aug 2012 13:03
#541744
you can P.M. Brian, at kz10006 he sells good parts, cheap, & maybe get a diferent tach drive....Pete
1980 LTD 1000..,1976 LTD 900, have the 1000&900 now. the rest are previous= 1978 KZ 650 B.., 1980 Yamaha XT 500..,1978 Yamaha DT 400.., 1977 Yamaha yz 80..,Honda trail ct 70.., Honda QA 50...5-1/2 hp brigs & straton CAT chopper mini bike...3-1/2 hp mini bike (WHEN GAS WAS ABOUT 45 CENTS A GALLON)!!!!

Please Log in or Create an account to join the conversation.

  • Old Man Rock
  • Old Man Rock's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6071
  • Thanks: 225

Re: Tacho cable still freaking leaking

10 Aug 2012 13:08
#541745
"i'm not wearing nail varnish.. honestly." .... :blush: Yeah sure it is wifey poo... ;)

Use Dupli-Color wheel base paint on them nails, won't chip while wrenching on your kawi... :whistle:
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter

Phoenix, Az

Please Log in or Create an account to join the conversation.

  • KZ1000inaus
  • KZ1000inaus's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Luminous Red KZ1000 A2
  • Posts: 135
  • Thanks: 4

Re: Tacho cable still freaking leaking

11 Aug 2012 04:30
#541894
Old Man Rock wrote: "i'm not wearing nail varnish.. honestly." .... :blush: Yeah sure it is wifey poo... ;)

Use Dupli-Color wheel base paint on them nails, won't chip while wrenching on your kawi... :whistle:
haha :laugh:
Ok you got me.. i'll try the duplicolor if that's what you recommend.. :lol:

old seal came out easily when i heated up the housing
fitted new and went for a test ride and not leaking yet :-)

buy the way the old girl (the bike not wife) won the peoples choice at a local classic bike show last week !!
Off to another show tomo but it's much larger and i feel there will be a fair amount of competition so just viewing not entering.
Thanks for all the advice guys (especially the nail polish!!)

Attachment IMG_4290.jpg not found

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum