cam chain

  • torquey
  • torquey's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 13
  • Thanks: 0

cam chain

12 Aug 2012 19:57
#542157
Any guesses how many crank teeth chain can jump before valve-piston interference? Also is there an easy way to get chain to jump back a tooth or so without cracking the case?
79 kz650 sr pods mac 4-1 dynaS dyna coils

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: cam chain

12 Aug 2012 21:56
#542178
I don't know for sure, maybe a couple but I wouldn't try finding out.

You don't have to split the cases to work on the chain and tensioner assembly, just lift the valve cover.
1979 KZ-750 Twin

Please Log in or Create an account to join the conversation.

  • torquey
  • torquey's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 13
  • Thanks: 0

Re: cam chain

12 Aug 2012 22:24
#542181
Wasn't really trying to find out, just have a suspition that it did skip a tooth or so. But engine rolls over easily by hand w/ wrench on crank bolt. Just finished dry comp test, got #'s ranging from 60 to 80. Don't know if that's good or not.
79 kz650 sr pods mac 4-1 dynaS dyna coils

Please Log in or Create an account to join the conversation.

  • Dragone
  • Dragone's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 34
  • Thanks: 0

Re: cam chain

13 Aug 2012 06:31
#542235
Those compression numbers you listed are low. 160-188psig consistent on all cylinders is more in the ball park.

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: cam chain

13 Aug 2012 07:04 - 13 Aug 2012 07:07
#542237
If not already done, would:

Hold throttle wide open during the compression test;

Repeat compression test after placing a spoonful of motor oil inside the combustion chamber through the spark plug hole;

Assure valves clearances are within specs;

Verify the compression test figures by re-testing with a different gauge.

Good Fortune! :)
1973 Z1
KZ900 LTD
Last edit: 13 Aug 2012 07:07 by Patton.

Please Log in or Create an account to join the conversation.

  • torquey
  • torquey's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 13
  • Thanks: 0

Re: cam chain

13 Aug 2012 19:04
#542363
K. So anyone know how to get the cam chain to skip a tooth or so on the crank without skipping on the cams?
79 kz650 sr pods mac 4-1 dynaS dyna coils

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum