exhaust pressure
- at20
-
Topic Author
- Offline
- User
-

Registered
- Posts: 50
- Thanks: 0
exhaust pressure
15 Aug 2012 07:26
Hi there
I have a 1976 kz400 and i noticed that I'm not having equal exhaust pressure and I'm concerned. The right side blows strong hot air out the pipe but the left side blows soft cold air. This doing homework about different things but I don't think that's right and i really don't know where to start.
Also I noticed when Its running I can try to adjust the air mixture screw on the right carb and it effects the way the bike runs but when I do the same with the carb on the left I don't get any results. I can screw it all the way in and out and nothing happens with the way the bike runs. Is it from no spark on the left side or a compression issue ???????????? Does any one have any ideas or thoughts on these issues.
Any and all help is gladly appreciated
Thanks
I have a 1976 kz400 and i noticed that I'm not having equal exhaust pressure and I'm concerned. The right side blows strong hot air out the pipe but the left side blows soft cold air. This doing homework about different things but I don't think that's right and i really don't know where to start.
Also I noticed when Its running I can try to adjust the air mixture screw on the right carb and it effects the way the bike runs but when I do the same with the carb on the left I don't get any results. I can screw it all the way in and out and nothing happens with the way the bike runs. Is it from no spark on the left side or a compression issue ???????????? Does any one have any ideas or thoughts on these issues.
Any and all help is gladly appreciated
Thanks
1976 kz400
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: exhaust pressure
15 Aug 2012 09:55
Start with the basics, Valve adjustment and compression test.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
- at20
-
Topic Author
- Offline
- User
-

Registered
- Posts: 50
- Thanks: 0
Re: exhaust pressure
15 Aug 2012 13:14
But if I didn't have compressionon that side I wouldn't be getting pressure at all right. or is that just cuz the engine is running I tried checking the values before and it was fine from what I can remember
1976 kz400
Please Log in or Create an account to join the conversation.
- adventurekz
-
- Offline
- User
-

Registered
- proud owner 77 KZ400,370cc Bultaco Frontera
- Posts: 3
- Thanks: 0
Re: exhaust pressure
15 Aug 2012 18:03
Check your low speed jet in the carb on the side that's cool. I had a 750 four that was the same. It had a piece of clear silica blocking the jet. You could see light through it but it was blocked. Try using a very fine wire or welding tip cleaner to clear it . You should remove the jet if you can when you do this without damaging the jet or carb., pushing the wire from the other side of the jet(think backflush)to clean the jet.
Best of Luck!
Best of Luck!
Please Log in or Create an account to join the conversation.
- zukdave
-
- Offline
- User
-

Registered
- Posts: 1678
- Thanks: 227
Re: exhaust pressure
15 Aug 2012 22:22
Check for spark check comparison
if they pass then spray some carb. cleaner in the dead
side motor running if it pick's up rebuild BOTH carb,'s.
if they pass then spray some carb. cleaner in the dead
side motor running if it pick's up rebuild BOTH carb,'s.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.
Please Log in or Create an account to join the conversation.
- at20
-
Topic Author
- Offline
- User
-

Registered
- Posts: 50
- Thanks: 0
Re: exhaust pressure
17 Aug 2012 09:15
I tried that carb cleaner before in the past but its like It choked out the engine when I sprayed some in it
1976 kz400
Please Log in or Create an account to join the conversation.
- MDawnz1
-
- Offline
- User
-

Registered
- Posts: 319
- Thanks: 27
Re: exhaust pressure
19 Aug 2012 00:47
All you need is your carbs synchronized .
Its a 5 minute job for someone who knows what they are doing.
And has the tools.
Its a 5 minute job for someone who knows what they are doing.
And has the tools.
1974 Z1a, still 903
Please Log in or Create an account to join the conversation.
- martin_csr
-
- Offline
- User
-

Registered
- Posts: 7993
- Thanks: 1648
Last edit: 22 Jan 2013 21:14 by martin_csr.
Please Log in or Create an account to join the conversation.
- at20
-
Topic Author
- Offline
- User
-

Registered
- Posts: 50
- Thanks: 0
Re: exhaust pressure
20 Aug 2012 17:36
Ok guys I checked for spark and I have that's I can check that off the list. My next step is trying to check for compression but I don't have a tester yet so a friend told my to do the water test to my exhaust pipes coming from the cylinder and the right cylinder stems off instantly and the left one (which Is the one In question ) didn't do anything. the water just ran off even in the too of the head its barley warm to the touch.
What should be the next tip besides compression testing or should I even still do that since I know something is wrong. What else could it be
What should be the next tip besides compression testing or should I even still do that since I know something is wrong. What else could it be
1976 kz400
Please Log in or Create an account to join the conversation.
- Del_Herring
-
- Offline
- User
-

Registered
- Posts: 278
- Thanks: 29
Re: exhaust pressure
20 Aug 2012 18:06
The comp check is still worthwhile. That would definitely be my honest, what's next answer. If you want to skip it for now, you could clean the carbs if you never have, and then sync them, if they're too out of sync it can cause misfires, especially at idle.
Compression testers aren't too pricey. I think I paid $25 for mine at an autozone, and most auto stores will rent them as well, so you pay for it, use it, bring it back for a full refund. Just make sure that if you get one from a car place, it has the appropraite adapter size for the bike's spark plugs.
Compression testers aren't too pricey. I think I paid $25 for mine at an autozone, and most auto stores will rent them as well, so you pay for it, use it, bring it back for a full refund. Just make sure that if you get one from a car place, it has the appropraite adapter size for the bike's spark plugs.
1983 KZ750-N2 Spectre
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: exhaust pressure
20 Aug 2012 18:12
If you have an AutoZone or Advance Auto Parts store in your area you can use their free tool loaner program to borrow a compression tester. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Please Log in or Create an account to join the conversation.
- at20
-
Topic Author
- Offline
- User
-

Registered
- Posts: 50
- Thanks: 0
Re: exhaust pressure
21 Aug 2012 07:06
I cleaned the carbs before but the compression test I never done. that was my idea with the tool was just use one from the store. I also thought that maybe they just need to be put in sync. But I never done that before. I seen a video on bench sync once but I don't think I did it right
1976 kz400
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
