Pumpgas,octane, compression ??
- kzz1king
-
Topic Author
- Offline
- User
-

Registered
- Posts: 821
- Thanks: 52
Pumpgas,octane, compression ??
13 Sep 2012 11:42
Another member raised this on another thread. What octane is needed for higher compression? What are you doing to get there? Anyone using octane booster. Buying special fuels? Pulling timing? What is a good compression for a street motor?
I am running a 1075 kit, 10/1 I believe.
Wayne
I am running a 1075 kit, 10/1 I believe.
Wayne
74 Z1 1075, 29 smoothbores, owned and ridden since 1976
Home built KZ1000 turbo setup
www.kzrider.com/forum/11-projects/532476...s-budget-turbo-build
www.kzrider.com/forum/11-projects/532489-74-z-makeover
Home built KZ1000 turbo setup
www.kzrider.com/forum/11-projects/532476...s-budget-turbo-build
www.kzrider.com/forum/11-projects/532489-74-z-makeover
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Pumpgas,octane, compression ??
13 Sep 2012 18:02
Its the actual cranking compression numbers you need to worry about and it has a lot to do with cam lift and duration and cam timing.
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- 4TheKZ1000
-
- User
-

Public
- Thanks: 0
Re: Pumpgas,octane, compression ??
13 Sep 2012 18:08
kz 1000.....1075
10.25 to 1
Im running Turbo Blue racing fuel.....110 octane.
I can really tell difference over pump gas....smells cool when burt also...LOL
10.25 to 1
Im running Turbo Blue racing fuel.....110 octane.
I can really tell difference over pump gas....smells cool when burt also...LOL
Please Log in or Create an account to join the conversation.
- Powerstroke_fan
-
- Offline
- User
-

Registered
- Posts: 1020
- Thanks: 90
Re: Pumpgas,octane, compression ??
13 Sep 2012 18:59 - 13 Sep 2012 19:014TheKZ1000 wrote: kz 1000.....1075
10.25 to 1
Im running Turbo Blue racing fuel.....110 octane.
I can really tell difference over pump gas....smells cool when burt also...LOL
I bet that gets expensive i just run only premium 93 octane. Sometimes i go to the gas station close by where they sell 110 octane and get some and mix it half half. I can tell a diffrence, But it isnt neccassary to run that high octane. It does smell good when burnt also. Like wireman said it all depends on your engine.
1977 KZ 1000 work in progress
Last edit: 13 Sep 2012 19:01 by Powerstroke_fan.
Please Log in or Create an account to join the conversation.
- kzz1king
-
Topic Author
- Offline
- User
-

Registered
- Posts: 821
- Thanks: 52
Re: Pumpgas,octane, compression ??
13 Sep 2012 22:00wireman wrote: Its the actual cranking compression numbers you need to worry about and it has a lot to do with cam lift and duration and cam timing.
So how does one get these numbers and how do I use them when I get them? I cannot remember what I degreed the cams to. Cams are a mild drop in. My hearing is not good enough to pick up pinging. Bike runs great and I want to keep it that way
Wayne
74 Z1 1075, 29 smoothbores, owned and ridden since 1976
Home built KZ1000 turbo setup
www.kzrider.com/forum/11-projects/532476...s-budget-turbo-build
www.kzrider.com/forum/11-projects/532489-74-z-makeover
Home built KZ1000 turbo setup
www.kzrider.com/forum/11-projects/532476...s-budget-turbo-build
www.kzrider.com/forum/11-projects/532489-74-z-makeover
Please Log in or Create an account to join the conversation.
- les holt
-
- Offline
- Vendor
-

Registered
- Posts: 1633
- Thanks: 286
Re: Pumpgas,octane, compression ??
13 Sep 2012 23:07
1075 10.5-1 with pretty agressive cams and I run 93, if it pings a little I add booster. I like to run the lowest octane I can. I don't run race fuel and don't see any need at all on a low compression motor like these.
4thekz, I hope turbo blue is better in your area, worst fuel I've ever seen! Everybody had problems with it around here to the point they quit selling it, nobody would buy it.
Les
4thekz, I hope turbo blue is better in your area, worst fuel I've ever seen! Everybody had problems with it around here to the point they quit selling it, nobody would buy it.
Les
www.facebook.com/PdmCustomFabrication
76 kz 900 turbo
77 LTD 1000 turbo
2 78 Z1R's
72 H2
kzrider.com/forum/13-bike-related/491552...one-followed-me-home
accelerate.presspublisher.us/issue/issue-6-2012/article/ltd
www.cycleworld.com/2013/09/04/2013-cycle...-concours-bike-show/
76 kz 900 turbo
77 LTD 1000 turbo
2 78 Z1R's
72 H2
kzrider.com/forum/13-bike-related/491552...one-followed-me-home
accelerate.presspublisher.us/issue/issue-6-2012/article/ltd
www.cycleworld.com/2013/09/04/2013-cycle...-concours-bike-show/
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Pumpgas,octane, compression ??
14 Sep 2012 02:30Get a compression tester from auto parts store would be first thing if bike is up/runningkzz1king wrote:wireman wrote: Its the actual cranking compression numbers you need to worry about and it has a lot to do with cam lift and duration and cam timing.
So how does one get these numbers and how do I use them when I get them? I cannot remember what I degreed the cams to. Cams are a mild drop in. My hearing is not good enough to pick up pinging. Bike runs great and I want to keep it that way
Wayne
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- Powerstroke_fan
-
- Offline
- User
-

Registered
- Posts: 1020
- Thanks: 90
Re: Pumpgas,octane, compression ??
14 Sep 2012 08:32
Jim is correct if you gotta know exactly. But it i were you i would just always run 93 and you will be allright. Ive been running it for a while with no problems. It sounds like you have a mild build. I wouldnt worry about the race fuel unless you like spending almost $7 a gal on gas.
1977 KZ 1000 work in progress
The following user(s) said Thank You: wireman
Please Log in or Create an account to join the conversation.
- mark1122
-
- Offline
- User
-

Registered
- Keep twisting it
- Posts: 5297
- Thanks: 109
Re: Pumpgas,octane, compression ??
14 Sep 2012 13:44
i run 91 octane here in Canada with 10.25:1. no ping here but i also run
a Dyna2000 . it has an electronic advance curve that can help if u have a ping.
a Dyna2000 . it has an electronic advance curve that can help if u have a ping.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- mtbspeedfreak
-
- Offline
- User
-

Registered
- Posts: 1413
- Thanks: 36
Re: Pumpgas,octane, compression ??
14 Sep 2012 14:01
Apologies for a somewhat off-track question, but does someone make a combination compression and leak down tester, or are they separate entities?
I know the mechanics behind each method, just trying to save myself a few bucks.
I know the mechanics behind each method, just trying to save myself a few bucks.
2000 ZRX 1100
1976 KZ 900- Daily Driver
1980 LTD 550- Dalton Highway survivor!
If it has tits or tires, it'll give you problems!
1976 KZ 900- Daily Driver
1980 LTD 550- Dalton Highway survivor!
If it has tits or tires, it'll give you problems!
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
