Problems with cylinder #2
- Spudrider2511
-
Topic Author
- Offline
- User
-

Registered
- Posts: 5
- Thanks: 0
Problems with cylinder #2
25 Sep 2012 11:15
I'm sure I need to do an intro somewhere else, but I need your help asap. I've aquired a 1979 KZ1000 ltd with around 45,000 miles. It runs - not great but it runs. The problem is that it blows a lot of oily smoke out the left muffler and clears up when I pull the #2 plug. So far, I've cleaned the carbs, replaced a weak coil (#1 & 4), and checked the valve clearance. Here are those results: Intake 1-.076 2-.076 3-.051 4-.102 Exhaust 1-.127 2-.102 3-.127 4-.127
When the bike is running, I noticed what looks to be exhaust comming out of the #2 carb (it has crappy pods which are soon to be changed out). I plan to do a compression test on all cylinders, but have to get the tool back from a friend. I'm new to these vintage bikes so any help would be appreciated.
When the bike is running, I noticed what looks to be exhaust comming out of the #2 carb (it has crappy pods which are soon to be changed out). I plan to do a compression test on all cylinders, but have to get the tool back from a friend. I'm new to these vintage bikes so any help would be appreciated.
Please Log in or Create an account to join the conversation.
- mark1122
-
- Offline
- User
-

Registered
- Keep twisting it
- Posts: 5297
- Thanks: 109
Re: Problems with cylinder #2
25 Sep 2012 23:26
a compresion test would be a great place to start.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- 4TheKZ1000
-
- User
-

Public
- Thanks: 0
Re: Problems with cylinder #2
25 Sep 2012 23:34 - 25 Sep 2012 23:36
When the bike is running, I noticed what looks to be exhaust comming out of the #2 carb
sounds like a leaking intake valve, letting gasses come out carb? or cam timming just off...bent valve hanging...or valve clearance off.
sounds like a leaking intake valve, letting gasses come out carb? or cam timming just off...bent valve hanging...or valve clearance off.
Last edit: 25 Sep 2012 23:36 by 4TheKZ1000.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
