Cam chain tensioner
- Calico
-
Topic Author
- Offline
- User
-

Registered
- Posts: 86
- Thanks: 0
Cam chain tensioner
28 Sep 2012 12:49
So! Here I am again. I was considering changing to a manual cam chain tensioner when someone told me that he thinks mine can be adjusted. I was under the impression that mine could not be. Does anyone know differently for an 82' 750ltd? Thank you.
81' KZ750LTD 4 CYL
82' KZ750LTD 4 CYL
82' KZ750LTD 4 CYL
The topic has been locked.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Cam chain tensioner
28 Sep 2012 14:06
You should be able to convert yours to manual with a little bit of work
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
The topic has been locked.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Cam chain tensioner
28 Sep 2012 16:01
According to kawasaki.com the same cam-chain tensioner was used on these 31 models.
Model (31):
KZ1000-A3 (KZ1000) (1979)
KZ1000-A3A (KZ1000) (1979)
KZ1000-A4 (KZ1000) (1980)
KZ1000-B3 (KZ1000 LTD) (1979)
KZ1000-B4 (LTD) (1980)
KZ1000-C2 (Police 1000) (1979)
KZ1000-C3 (Police 1000) (1980)
KZ1000-C4 (Police 1000) (1981)
KZ1000-D3 (Z1R) (1980)
KZ1000-E1 (Shaft) (1979)
KZ1000-E2 (Shaft) (1980)
KZ1000-G1 (Classic) (1980)
KZ650-B1 (1977)
KZ650-B2 (1978)
KZ650-B2A (1978)
KZ650-B3 (1979)
KZ650-C1 (Custom) (1977)
KZ650-C2 (Custom) (1978)
KZ650-C3 (Custom) (1979)
KZ650-D1 (SR) (1978)
KZ650-D1A (SR) (1978)
KZ650-D2 (SR) (1979)
KZ650-E1 (LTD) (1980)
KZ650-F1 (1980)
KZ750-E1 (1980)
KZ750-E2 (1981)
KZ750-E3 (1982)
KZ750-H1 (LTD) (1980)
KZ750-H2 (LTD) (1981)
KZ750-H3 (LTD) (1982)
KZ750-H4 (LTD) (1983)
The FSM for any of these models should provide instructions about the tension adjuster.
Perhaps there's a freely down-loadable manual around here somewhere.
Good Fortune!
Model (31):
KZ1000-A3 (KZ1000) (1979)
KZ1000-A3A (KZ1000) (1979)
KZ1000-A4 (KZ1000) (1980)
KZ1000-B3 (KZ1000 LTD) (1979)
KZ1000-B4 (LTD) (1980)
KZ1000-C2 (Police 1000) (1979)
KZ1000-C3 (Police 1000) (1980)
KZ1000-C4 (Police 1000) (1981)
KZ1000-D3 (Z1R) (1980)
KZ1000-E1 (Shaft) (1979)
KZ1000-E2 (Shaft) (1980)
KZ1000-G1 (Classic) (1980)
KZ650-B1 (1977)
KZ650-B2 (1978)
KZ650-B2A (1978)
KZ650-B3 (1979)
KZ650-C1 (Custom) (1977)
KZ650-C2 (Custom) (1978)
KZ650-C3 (Custom) (1979)
KZ650-D1 (SR) (1978)
KZ650-D1A (SR) (1978)
KZ650-D2 (SR) (1979)
KZ650-E1 (LTD) (1980)
KZ650-F1 (1980)
KZ750-E1 (1980)
KZ750-E2 (1981)
KZ750-E3 (1982)
KZ750-H1 (LTD) (1980)
KZ750-H2 (LTD) (1981)
KZ750-H3 (LTD) (1982)
KZ750-H4 (LTD) (1983)
The FSM for any of these models should provide instructions about the tension adjuster.
Perhaps there's a freely down-loadable manual around here somewhere.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
The topic has been locked.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: Cam chain tensioner
28 Sep 2012 16:31 - 28 Sep 2012 16:32Patton wrote: According to kawasaki.com the same cam-chain tensioner was used on these 31 models.
Model (31):
KZ1000-A3 (KZ1000) (1979)
KZ1000-A3A (KZ1000) (1979)
KZ1000-A4 (KZ1000) (1980)
KZ1000-B3 (KZ1000 LTD) (1979)
KZ1000-B4 (LTD) (1980)
KZ1000-C2 (Police 1000) (1979)
KZ1000-C3 (Police 1000) (1980)
KZ1000-C4 (Police 1000) (1981)
KZ1000-D3 (Z1R) (1980)
KZ1000-E1 (Shaft) (1979)
KZ1000-E2 (Shaft) (1980)
KZ1000-G1 (Classic) (1980)
KZ650-B1 (1977)
KZ650-B2 (1978)
KZ650-B2A (1978)
KZ650-B3 (1979)
KZ650-C1 (Custom) (1977)
KZ650-C2 (Custom) (1978)
KZ650-C3 (Custom) (1979)
KZ650-D1 (SR) (1978)
KZ650-D1A (SR) (1978)
KZ650-D2 (SR) (1979)
KZ650-E1 (LTD) (1980)
KZ650-F1 (1980)
KZ750-E1 (1980)
KZ750-E2 (1981)
KZ750-E3 (1982)
KZ750-H1 (LTD) (1980)
KZ750-H2 (LTD) (1981)
KZ750-H3 (LTD) (1982)
KZ750-H4 (LTD) (1983)
The FSM for any of these models should provide instructions about the tension adjuster.
Perhaps there's a freely down-loadable manual around here somewhere.
Good Fortune!
I saw this same info, but this is one area where the Kawasaki.com data has errors. The tensioners definitely are not the same across those models. I would suggest supplying a picture of the tensioner in question; maybe that will help identify which flavor it is. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Last edit: 28 Sep 2012 16:32 by 650ed.
The following user(s) said Thank You: wireman
The topic has been locked.
- turboguzzi
-
- Offline
- User
-

Registered
- Posts: 852
- Thanks: 75
Re: Cam chain tensioner
28 Sep 2012 16:39wireman wrote: You should be able to convert yours to manual with a little bit of work
indeed
The topic has been locked.
- Calico
-
Topic Author
- Offline
- User
-

Registered
- Posts: 86
- Thanks: 0
Re: Cam chain tensioner
28 Sep 2012 16:44
Right, changing to manual is the easiest way. In fact, there is a way to convert one from the original. I'm just not certain if I can take the slack out with a cross wedge. I'll take a picture asap and post soon. Than you to everyone!
81' KZ750LTD 4 CYL
82' KZ750LTD 4 CYL
82' KZ750LTD 4 CYL
The topic has been locked.
- martin_csr
-
- Offline
- User
-

Registered
- Posts: 7993
- Thanks: 1648
Re: Cam chain tensioner
28 Sep 2012 17:13 - 28 Sep 2012 18:10
I think Patton made a boo-boo.
My search shows the Cam Chain Tensioner Part No. 12049-1015 being shared on the following 26 models:
Model (26):
KZ650-H1 (CSR) (1981)
KZ650-H2 (CSR) (1982)
KZ650-H3 (CSR) (1983)
KZ700-A1 (1984)
KZ750-E1 (1980)
KZ750-E2 (1981)
KZ750-E3 (1982)
KZ750-F1 (LTD Shaft) (1983)
KZ750-H1 (LTD) (1980)
KZ750-H2 (LTD) (1981)
KZ750-H3 (LTD) (1982)
KZ750-H4 (LTD) (1983)
KZ750-L3 (1983)
KZ750-N1 (Spectre) (1982)
KZ750-N2 (Spectre) (1983)
KZ750-R1 (GPz) (1982)
ZN700-A1 (LTD Shaft) (1984)
ZN700-A2 (LTD Shaft) (1985)
ZR750-C1 (Zephyr 750) (1991)
ZR750-C2 (Zephyr 750) (1992)
ZR750-C3 (Zephyr 750) (1993)
ZX750-A1 (GPz 750) (1983)
ZX750-A2 (GPz 750) (1984)
ZX750-A3 (GPz 750) (1985)
ZX750-E1 (GPz 750 Turbo) (1984)
ZX750-E2 (GPz 750 Turbo) (1985)
Editing note from Patton -- Having unintentionally "edited" martin's post, this version is recalled from memory.
My search shows the Cam Chain Tensioner Part No. 12049-1015 being shared on the following 26 models:
Model (26):
KZ650-H1 (CSR) (1981)
KZ650-H2 (CSR) (1982)
KZ650-H3 (CSR) (1983)
KZ700-A1 (1984)
KZ750-E1 (1980)
KZ750-E2 (1981)
KZ750-E3 (1982)
KZ750-F1 (LTD Shaft) (1983)
KZ750-H1 (LTD) (1980)
KZ750-H2 (LTD) (1981)
KZ750-H3 (LTD) (1982)
KZ750-H4 (LTD) (1983)
KZ750-L3 (1983)
KZ750-N1 (Spectre) (1982)
KZ750-N2 (Spectre) (1983)
KZ750-R1 (GPz) (1982)
ZN700-A1 (LTD Shaft) (1984)
ZN700-A2 (LTD Shaft) (1985)
ZR750-C1 (Zephyr 750) (1991)
ZR750-C2 (Zephyr 750) (1992)
ZR750-C3 (Zephyr 750) (1993)
ZX750-A1 (GPz 750) (1983)
ZX750-A2 (GPz 750) (1984)
ZX750-A3 (GPz 750) (1985)
ZX750-E1 (GPz 750 Turbo) (1984)
ZX750-E2 (GPz 750 Turbo) (1985)
Editing note from Patton -- Having unintentionally "edited" martin's post, this version is recalled from memory.
Last edit: 28 Sep 2012 18:10 by Patton.
The topic has been locked.
- martin_csr
-
- Offline
- User
-

Registered
- Posts: 7993
- Thanks: 1648
Re: Cam chain tensioner
28 Sep 2012 17:21 - 28 Sep 2012 17:21This place sells manual tensioners.Calico wrote: Right, changing to manual is the easiest way. In fact, there is a way to convert one from the original. I'm just not certain if I can take the slack out with a cross wedge. I'll take a picture asap and post soon. Than you to everyone!
Clem's Garage - Krieger cam chain tenisoners ... klx678 over at the kawasakimotorcycle.org site .
Last edit: 28 Sep 2012 17:21 by martin_csr.
The topic has been locked.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: Cam chain tensioner
28 Sep 2012 17:42martin_csr wrote: I think Patton made a boo-boo. ......
He may have done the same as I. If you look at part #99996-1021 TENSIONER KIT Kawasaki.com shows it is used for all the models Patton listed. However, many of the individual parts in the kit don't fit some of the models listed because their tensioners are different. Very confusing. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
The topic has been locked.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Cam chain tensioner
28 Sep 2012 18:15 - 28 Sep 2012 18:51Thanks, martin!martin_csr wrote: I think Patton made a boo-boo....
I referenced Tensioner Kit 99996-1021 instead of Cam Chain Tensioner 12049-1015. :huh:
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Last edit: 28 Sep 2012 18:51 by Patton.
The topic has been locked.
- martin_csr
-
- Offline
- User
-

Registered
- Posts: 7993
- Thanks: 1648
Re: Cam chain tensioner
28 Sep 2012 18:27
Is that Tensioner Kit a manual type? I didn't even notice that. hee.
I think I made a boo-boo too by not looking at the Kaw diagram carefully enough... hee.
I think I made a boo-boo too by not looking at the Kaw diagram carefully enough... hee.
The topic has been locked.
- Calico
-
Topic Author
- Offline
- User
-

Registered
- Posts: 86
- Thanks: 0
Re: Cam chain tensioner
29 Sep 2012 13:41
Ok, here is a picture of what mine looks like but mine has not been removed yet. So does anyone know if this one can be adjusted? By appearance it seems so. But my Clymer book isn't of much help here.
81' KZ750LTD 4 CYL
82' KZ750LTD 4 CYL
82' KZ750LTD 4 CYL
The topic has been locked.
Moderators: Street Fighter LTD
