'82 GPZ750 Head Replacement

  • KraZyRIDER
  • KraZyRIDER's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 434
  • Thanks: 44

'82 GPZ750 Head Replacement

24 Oct 2012 01:33
#555522
...Anyone know the best place to but the necessary gaskets for this beast?

...Dealer, Internet, FleeBay?
Mean Green Speed Machine!
1979 KZ 650-C3 (Cafe Project)
1982 GPz 750-R1
1981 GPz 1100-B1
2005 H-D XL1200C
2006 H-D XL1200C

Please Log in or Create an account to join the conversation.

  • turboguzzi
  • turboguzzi's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 852
  • Thanks: 75

Re: '82 GPZ750 Head Replacement

24 Oct 2012 12:29
#555556
make sure to get the MLS gasket from the late zephyr / ZR7 models,

the other gaskets can be reused without problems

Please Log in or Create an account to join the conversation.

  • KraZyRIDER
  • KraZyRIDER's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 434
  • Thanks: 44

Re: '82 GPZ750 Head Replacement

24 Oct 2012 19:12
#555600
turboguzzi wrote: make sure to get the MLS gasket from the late zephyr / ZR7 models,

the other gaskets can be reused without problems

...from anyone in particular?

...when you say, "other gaskets," I'm not sure what you mean.
Mean Green Speed Machine!
1979 KZ 650-C3 (Cafe Project)
1982 GPz 750-R1
1981 GPz 1100-B1
2005 H-D XL1200C
2006 H-D XL1200C

Please Log in or Create an account to join the conversation.

  • zukdave
  • zukdave's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1678
  • Thanks: 227

Re: '82 GPZ750 Head Replacement

24 Oct 2012 23:18
#555656
Never heard of using a MLS head gasket on these motors.
Car world they work great alum. head with iron block.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

  • steell
  • steell's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6849
  • Thanks: 208

Re: '82 GPZ750 Head Replacement

25 Oct 2012 13:31
#555714
zukdave wrote: Never heard of using a MLS head gasket on these motors.
Car world they work great alum. head with iron block.

Kawasaki went to MLS head gaskets years ago, and since the ZR7 is a late model (2000 or so) air cooled 750 motor they used MLS head gaskets which also fit the other air cooled 750 motors.

Probably available for the J motors also, since they were made through 2005.
KD9JUR
The following user(s) said Thank You: BlackZ1R

Please Log in or Create an account to join the conversation.

  • KraZyRIDER
  • KraZyRIDER's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 434
  • Thanks: 44

Re: '82 GPZ750 Head Replacement

25 Oct 2012 18:40
#555741
steell wrote:
zukdave wrote: Never heard of using a MLS head gasket on these motors.
Car world they work great alum. head with iron block.

Kawasaki went to MLS head gaskets years ago, and since the ZR7 is a late model (2000 or so) air cooled 750 motor they used MLS head gaskets which also fit the other air cooled 750 motors.

Probably available for the J motors also, since they were made through 2005.

...sooooo, what would be the best place to get these MLS gaskets? Dealer, Internet, FleeBay? Where to buy without getting raped? Or, doesn't it matter, they're all the same?
Mean Green Speed Machine!
1979 KZ 650-C3 (Cafe Project)
1982 GPz 750-R1
1981 GPz 1100-B1
2005 H-D XL1200C
2006 H-D XL1200C

Please Log in or Create an account to join the conversation.

  • zukdave
  • zukdave's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1678
  • Thanks: 227

Re: '82 GPZ750 Head Replacement

25 Oct 2012 22:57
#555793
Would they live in a 10.5 comp. 810cc motor with a 50 shot ??
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

  • turboguzzi
  • turboguzzi's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 852
  • Thanks: 75

Re: '82 GPZ750 Head Replacement

26 Oct 2012 04:30 - 26 Oct 2012 04:31
#555831
zukdave wrote: Would they live in a 10.5 comp. 810cc motor with a 50 shot ??

i use them in my 810/12:1 comp/90rwhp road race motor without even a hint of a leak after two race seasons.

krazy,

by other gaskets i meant the cam cover rubber, cam end half moons, o-rings, i simply reuse them with sealant

google part number 11004-1342 and you'll get plenty of sources. its a std kawasaki part

i bought mine from cheapcycleparts.com , but you can also try z1enterprises.com who support our site :)
Last edit: 26 Oct 2012 04:31 by turboguzzi.
The following user(s) said Thank You: BlackZ1R

Please Log in or Create an account to join the conversation.

  • KraZyRIDER
  • KraZyRIDER's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 434
  • Thanks: 44

Re: '82 GPZ750 Head Replacement

26 Oct 2012 10:40
#555850
turboguzzi wrote:
zukdave wrote: Would they live in a 10.5 comp. 810cc motor with a 50 shot ??

i use them in my 810/12:1 comp/90rwhp road race motor without even a hint of a leak after two race seasons.

krazy,

by other gaskets i meant the cam cover rubber, cam end half moons, o-rings, i simply reuse them with sealant

google part number 11004-1342 and you'll get plenty of sources. its a std kawasaki part

i bought mine from cheapcycleparts.com , but you can also try z1enterprises.com who support our site :)

...excellent, thanks TG! :)
Mean Green Speed Machine!
1979 KZ 650-C3 (Cafe Project)
1982 GPz 750-R1
1981 GPz 1100-B1
2005 H-D XL1200C
2006 H-D XL1200C

Please Log in or Create an account to join the conversation.

  • steell
  • steell's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6849
  • Thanks: 208

Re: '82 GPZ750 Head Replacement

26 Oct 2012 14:38
#555877
The OEM Kawasaki MLS head gaskets are used in the 200+ hp 750 Turbo bikes. Next step up is copper gasket with O-rings.
KD9JUR

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum