what model and engine please

  • cjcrug
  • cjcrug's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 23
  • Thanks: 2

what model and engine please

29 Oct 2012 21:44
#556290
I bought this bike about a month ago,slowly trying to bring it back to life. Id like to know what model and engine i have. The po said it is a 1979 kz 1000 ltd. The frame and engine numbers are as follows. Frame # KZT00B517299 Engine # KZT00AE058867. I do know it has been bored to 73mm and has andrews 2x cams. I believe this thing should be NASTY once i get it running. Kerker 4 into 1 also. Any info would be greatly appreciated, thank you.
79 KZ 1000 B3 LTD
Wiseco 1105
Kerker 4 into 1
Dyna s ignition
Andrews cams



81 kz 1000 csr
Wiseco 1075

Please Log in or Create an account to join the conversation.

  • 4TheKZ1000
  • 4TheKZ1000's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: what model and engine please

29 Oct 2012 21:54 - 29 Oct 2012 22:13
#556291
cjcrug wrote: I bought this bike about a month ago,slowly trying to bring it back to life. Id like to know what model and engine i have. The po said it is a 1979 kz 1000 ltd. The frame and engine numbers are as follows. Frame # KZT00B-517299 Engine # KZT00AE058867. I do know it has been bored to 73mm and has andrews 2x cams. I believe this thing should be NASTY once i get it running. Kerker 4 into 1 also. Any info would be greatly appreciated, thank you.

This is what I found....two different years...could be wrong but looks right. This info was found above right "FILEBASE".....

1979 Kawasaki KZ 1000 B3

Frame# KZTOOB-515537 - 523543
_____________________________________

1978 Kawasaki KZ 1000 B2

Engine# KZTOOAE-057037 - 057066 & KZTOOAE-058797 - 075473
Last edit: 29 Oct 2012 22:13 by 4TheKZ1000.

Please Log in or Create an account to join the conversation.

  • cjcrug
  • cjcrug's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 23
  • Thanks: 2

Re: what model and engine please

29 Oct 2012 22:00
#556292
thank you, any info on engine, i think it may have been changed
79 KZ 1000 B3 LTD
Wiseco 1105
Kerker 4 into 1
Dyna s ignition
Andrews cams



81 kz 1000 csr
Wiseco 1075
The following user(s) said Thank You: 4TheKZ1000

Please Log in or Create an account to join the conversation.

  • wireman
  • wireman's Avatar
  • Offline
  • User
  • User
    Registered
  • The most interesting prick in the world
  • Posts: 4736
  • Thanks: 299

Re: what model and engine please

30 Oct 2012 01:25
#556329
From what Ive been told over the years the 79 ltds basically got left over 78 kz1000 bottem ends with updated charging systems with the newer style smog motor cylinder head,then in 1980 the ltds got the same motor as the mkII bikes.
Theres nothing wrong with the older style motors,it just got caught in the middle of a parts change over is all B)
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.

Please Log in or Create an account to join the conversation.

  • LarryC
  • LarryC's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1241
  • Thanks: 309

Re: what model and engine please

30 Oct 2012 08:05 - 30 Oct 2012 08:08
#556348
wireman wrote: From what Ive been told over the years the 79 ltds basically got left over 78 kz1000 bottem ends with updated charging systems with the newer style smog motor cylinder head,then in 1980 the ltds got the same motor as the mkII bikes.
Theres nothing wrong with the older style motors,it just got caught in the middle of a parts change over is all B)

Early 79's are like that. Later 79's got the MKII cranks, cam chains and sprockets. There used to be a serial number range on the Kaw microfiche that gave the information.

If the motor is a 78 and virgin, it will have the old head & old style engine covers plus old style charging system, small pin crank with full circle counter weights, points ignition, etc...
Larry C.
Last edit: 30 Oct 2012 08:08 by LarryC.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum