GPZ motor

  • stain
  • stain's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 14
  • Thanks: 0

GPZ motor

30 Oct 2012 19:27
#556438
I just purchased an 82 GPZ1100 parts bike for a project I have been sitting on for a few years. I purchased the bike mainly for the 33mm smoothbores that came on the bike. The thought in the back of my head was with the bigger carbs maybe there was some goodies inside. I removed the top end to find a 75mm bore with Weisco pistons. The cams don't have any markings on them but the cam gears read Z1000, they are NOT slotted.
This is my first Kawi engine as I have been working mainly on Suzuki's. Can anyone tell me if this was an aftermarket kit of some sort or maybe just an overbore?
Thanks

Please Log in or Create an account to join the conversation.

  • wireman
  • wireman's Avatar
  • Offline
  • User
  • User
    Registered
  • The most interesting prick in the world
  • Posts: 4736
  • Thanks: 299

Re: GPZ motor

31 Oct 2012 00:02
#556483
Sounds like an 1170 kit,which would be the biggest you can run in the stock 1100 sleeves.
Ive got a block and set of those pistons someplace I bought from kano here on the site a few years ago. B)
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.

Please Log in or Create an account to join the conversation.

  • stain
  • stain's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 14
  • Thanks: 0

Re: GPZ motor

31 Oct 2012 07:25
#556505
I'm guessing the cams are stock.........

Please Log in or Create an account to join the conversation.

  • wireman
  • wireman's Avatar
  • Offline
  • User
  • User
    Registered
  • The most interesting prick in the world
  • Posts: 4736
  • Thanks: 299

Re: GPZ motor

31 Oct 2012 12:40
#556539
Have you got a picture of the cams? B)
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.

Please Log in or Create an account to join the conversation.

  • stain
  • stain's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 14
  • Thanks: 0

Re: GPZ motor

31 Oct 2012 20:37
#556612
I will take some after I charge my camera battery

Please Log in or Create an account to join the conversation.

  • stain
  • stain's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 14
  • Thanks: 0

Re: GPZ motor

01 Nov 2012 19:04 - 02 Nov 2012 00:03
#556705
[attachment:3]C:\fakepath\1982 GPZ camshafts 003.jpg[/attachment]

[attachment:2]C:\fakepath\1982 GPZ camshafts 002.jpg[/attachment]

[attachment:1]C:\fakepath\1982 GPZ camshafts 001.jpg[/attachment]
[



I am having troublr getting my pictures to load
After some research and measuring it seems as these might be cams from a KZ1000. The exhaust cam lobes are different from the intake and my manual says the B2 cams were the same. Also the B2 cam gears were marked as such and these say Z1000 as it would on a KZ1000. Is my thinking corrrect? Why would someone do this? Is this supposed to be a performance upgrade? Any suggestions on what to put back into it?
Last edit: 02 Nov 2012 00:03 by stain.

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: GPZ motor

01 Nov 2012 20:23
#556715

Attachment picpostnewsite912x671.jpg not found




Good Fortune! :)
1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

  • stain
  • stain's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 14
  • Thanks: 0

Re: GPZ motor

02 Nov 2012 22:13
#556864
Could I have an KZ1100 motor painted black in a GPZ frame?

Please Log in or Create an account to join the conversation.

  • wireman
  • wireman's Avatar
  • Offline
  • User
  • User
    Registered
  • The most interesting prick in the world
  • Posts: 4736
  • Thanks: 299

Re: GPZ motor

02 Nov 2012 22:18
#556866
Yes any 1000/1100 j series motor could be made to look like a gpz motor if you didnt check numbers on front of cylinder or serial number on cases B)
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.

Please Log in or Create an account to join the conversation.

  • stain
  • stain's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 14
  • Thanks: 0

Re: GPZ motor

04 Nov 2012 09:24
#556992
Well if it is a J motor I still think I am OK. I want the 1170 kit in it and the cylinder head. I will use some APE cams or the stockers out of the other GPZ motor I have. It seems the 33mm smoothbores were a little overkill for stock head and cams??

Please Log in or Create an account to join the conversation.

  • zukdave
  • zukdave's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1678
  • Thanks: 227

Re: GPZ motor

04 Nov 2012 23:52
#557072
stain wrote: seems the 33mm smoothbores were a little overkill for stock head and cams??

Trade for my VM29's ?
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

  • baldy110
  • baldy110's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 2272
  • Thanks: 512

Re: GPZ motor

04 Nov 2012 23:58 - 04 Nov 2012 23:59
#557074
stain wrote: It seems the 33mm smoothbores were a little overkill for stock head and cams??

I am running RS36's on my 1135cc kitted GPz1100 with mild porting, stock cams and a 4 to 1 Kerker. I LOVE these carbs, I have tons of low end torque, amazing midrange and lots of top end. I would use the 33's.
Last edit: 04 Nov 2012 23:59 by baldy110.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum