valves too tight, help ordering shims needed
- gixxerfiend
-
Topic Author
- Offline
- User
-

Registered
- Posts: 38
- Thanks: 0
valves too tight, help ordering shims needed
30 Oct 2012 20:43
So Ive finally got around to checking the clearences and I have some very tight ones. This is the first time I have ever done this but I followed the manual exactly then double checked measurements.
1. .178
2. .076
3. .102
4. less then .038
5. .127
6. less then .038
7. .063
8. less then .038
I believe I can figure out what to do with most of them but what would you do about the really tight ones? On 4, 6, and 8 I couldnt even get the smallest feeler in.
1. .178
2. .076
3. .102
4. less then .038
5. .127
6. less then .038
7. .063
8. less then .038
I believe I can figure out what to do with most of them but what would you do about the really tight ones? On 4, 6, and 8 I couldnt even get the smallest feeler in.
2006 GSXR 1000
2005 CBR 600rr
1977 KZ 650
2005 CBR 600rr
1977 KZ 650
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: valves too tight, help ordering shims needed
30 Oct 2012 21:05
No problem; just install the shims called for in the valve adjustment chart in the Kawasaki Service Manual. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
The following user(s) said Thank You: wireman
Please Log in or Create an account to join the conversation.
- gixxerfiend
-
Topic Author
- Offline
- User
-

Registered
- Posts: 38
- Thanks: 0
Re: valves too tight, help ordering shims needed
31 Oct 2012 20:32 - 31 Oct 2012 20:36
Ok I have the shims out and plan on ordering from Z1 tomorrow, does this sound right?
clearance current shim shim needed
1 .178 265 2.70
2 .076 275 2.65
3 .102 Good
4 <.038 265 2.50-2.55 thinking 2.55?
5 .127 Good
6 <.038 270 2.55-2.60 thinking 2.60?
7 .063 270 2.60
8 <.038 260 2.45-2.50 thinking 2.50?
Ive read the write up someone had on here that says that for peak performance you want them as near to .10 if possible so the 2 that are in spec but are a little on the loose\tight side Im gonna change to see what I get. What should I do about the ones that I couldnt get the .038 feeler in? go a full .10 under current shim? I dont understand why the manual puts these into 2 different size shims on the graph. Thx for the help, I think I might be overthinking this because of the fact that I thought it would be harder or what? I also realize I can use some of the used shims instead of ordering
clearance current shim shim needed
1 .178 265 2.70
2 .076 275 2.65
3 .102 Good
4 <.038 265 2.50-2.55 thinking 2.55?
5 .127 Good
6 <.038 270 2.55-2.60 thinking 2.60?
7 .063 270 2.60
8 <.038 260 2.45-2.50 thinking 2.50?
Ive read the write up someone had on here that says that for peak performance you want them as near to .10 if possible so the 2 that are in spec but are a little on the loose\tight side Im gonna change to see what I get. What should I do about the ones that I couldnt get the .038 feeler in? go a full .10 under current shim? I dont understand why the manual puts these into 2 different size shims on the graph. Thx for the help, I think I might be overthinking this because of the fact that I thought it would be harder or what? I also realize I can use some of the used shims instead of ordering
2006 GSXR 1000
2005 CBR 600rr
1977 KZ 650
2005 CBR 600rr
1977 KZ 650
Last edit: 31 Oct 2012 20:36 by gixxerfiend. Reason: numbers
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: valves too tight, help ordering shims needed
31 Oct 2012 22:29
According to the KZ650 manual it looks like those should get you within spec. Check after installing to see if further adjustment is needed. Do 1 cam at a time.
Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
