Engine case broke
- Vranasaurus
-
Topic Author
- Offline
- User
-

Registered
- Posts: 42
- Thanks: 1
Engine case broke
15 Nov 2012 18:18 - 15 Nov 2012 18:25
The bike is a 1984 ZN1100.
When installing the crankcase breather cover I over tightened the bolt and the engine case broke. I attached a pic of the broken piece
Can I just have the piece welded back in or do I need to get a new engine case?
It goes without saying that I'm an idiot.
When installing the crankcase breather cover I over tightened the bolt and the engine case broke. I attached a pic of the broken piece
Can I just have the piece welded back in or do I need to get a new engine case?
It goes without saying that I'm an idiot.
1984 ZN1100
1975 Z1B
1975 Z1B
Last edit: 15 Nov 2012 18:25 by Vranasaurus.
The following user(s) said Thank You: donthaveakawman
Please Log in or Create an account to join the conversation.
- 4TheKZ1000
-
- User
-

Public
- Thanks: 0
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: Engine case broke
15 Nov 2012 19:33
It can be welded. You may want to invest in a torque wrench calibrated in inch pounds; it can save you headaches. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
The following user(s) said Thank You: donthaveakawman
Please Log in or Create an account to join the conversation.
- Vranasaurus
-
Topic Author
- Offline
- User
-

Registered
- Posts: 42
- Thanks: 1
Re: Engine case broke
15 Nov 2012 21:05
I have one of those but in my infite wisdom I decided to use my meticulously calibrated arm.
But in stripping it down to get the engine out I found what may be one of my problems. There was no exhaust clamp on one of the pipes coming out of the head where it meets the rest of the exhaust.
But in stripping it down to get the engine out I found what may be one of my problems. There was no exhaust clamp on one of the pipes coming out of the head where it meets the rest of the exhaust.
1984 ZN1100
1975 Z1B
1975 Z1B
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: Engine case broke
15 Nov 2012 22:57
How much metal is let where that broke? Can it be drilled deeper? Pictures always help. I suppose it would go through to the transmission if drilled to much. Since it's only the breather, it wouldn't take much to hold it, hence one center bolt. If there is any metal deeper, you might be able to first drill the hole, then glue with JB Weld the broken piece. Then Tap from the existing threads down into the new deeper hole? Just a thought.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
- Galactica
-
- Offline
- User
-

Registered
- Posts: 268
- Thanks: 2
Re: Engine case broke
16 Nov 2012 01:40
It most certainly can be repaired. But it will likely require a complete engine teardown to weld it. At least with the older KZs, you cannot replace just the top 1/2 of the engine cases. When the cases were made, they were assembled, then machined for the crank and other internals as a unit.
Looks like you are looking at an engine rebuild, or find another engine. Sorry for your misfortune. I've done many similar things myself.
Cheers,
Ross
Looks like you are looking at an engine rebuild, or find another engine. Sorry for your misfortune. I've done many similar things myself.
Cheers,
Ross
77KZ1000
76 KZ900
76 KZ900
The following user(s) said Thank You: donthaveakawman
Please Log in or Create an account to join the conversation.
- DesertKZ
-
- Offline
- User
-

Registered
- Posts: 227
- Thanks: 20
Re: Engine case broke
16 Nov 2012 16:34
IMHO I would try and JB weld it first, and save pulling the motor. I know it's shady shade-tree mechanics but it's worth a shot.
1979 KZ1000 Shaft
1979 CX500C
1975 GT750 Smoker
1979 CX500C
1975 GT750 Smoker
Please Log in or Create an account to join the conversation.
- Nebr_Rex
-
- Offline
- User
-

Registered
- Posts: 1889
- Thanks: 295
Re: Engine case broke
16 Nov 2012 17:24
Could you post a couple of pics of the engine,one from each side.
2002 ZRX1200R
81 GPz1100
79 KZ1000st daily ride
79 KZ1000mk2 prodject
78 KZ650sr
78 KZ650b
81 KZ750e
80 KZ750ltd
77 KZ400/440 cafe project
76 KZ400/440 Fuel Injected
www.dotheton.com/index.php?threads/dr-je...air-of-kz400s.39120/
.
81 GPz1100
79 KZ1000st daily ride
79 KZ1000mk2 prodject
78 KZ650sr
78 KZ650b
81 KZ750e
80 KZ750ltd
77 KZ400/440 cafe project
76 KZ400/440 Fuel Injected
www.dotheton.com/index.php?threads/dr-je...air-of-kz400s.39120/
.
The following user(s) said Thank You: donthaveakawman
Please Log in or Create an account to join the conversation.
- Vranasaurus
-
Topic Author
- Offline
- User
-

Registered
- Posts: 42
- Thanks: 1
Re: Engine case broke
16 Nov 2012 19:22
I did try JB weld and it didn't hold up. I have an evinrude that has jb weld for part of the water pump housing and it's holding up great after 5 years.
I pulled the engine and dropped it off at the shop to be welded. I've been needing to tear into the bike any way and replace the o-rings and seals in the final drive. I kept putting it off but no better time than now I guess. Pulling the engine by yourself is no fun.
I will post pics when I get it back.
I pulled the engine and dropped it off at the shop to be welded. I've been needing to tear into the bike any way and replace the o-rings and seals in the final drive. I kept putting it off but no better time than now I guess. Pulling the engine by yourself is no fun.
I will post pics when I get it back.
1984 ZN1100
1975 Z1B
1975 Z1B
Please Log in or Create an account to join the conversation.
- 4TheKZ1000
-
- User
-

Public
- Thanks: 0
Re: Engine case broke
16 Nov 2012 19:34Vranasaurus wrote: I did try JB weld and it didn't hold up. I have an evinrude that has jb weld for part of the water pump housing and it's holding up great after 5 years.
I pulled the engine and dropped it off at the shop to be welded. I've been needing to tear into the bike any way and replace the o-rings and seals in the final drive. I kept putting it off but no better time than now I guess. Pulling the engine by yourself is no fun.
I will post pics when I get it back.
Oil will mess with a bunch of stuff....alum is so porous and holds oil deep inside the material.....hard to get a good bond.
Please Log in or Create an account to join the conversation.
- Vranasaurus
-
Topic Author
- Offline
- User
-

Registered
- Posts: 42
- Thanks: 1
Re: Engine case broke
22 Nov 2012 08:07
As promised, here is a pic of the repair.
1984 ZN1100
1975 Z1B
1975 Z1B
Please Log in or Create an account to join the conversation.
- donthaveakawman
-
- User
-

Public
- Thanks: 0
Re: Engine case broke
22 Nov 2012 08:14
fyi its's thanksgiving so I clicked the red thank you on all of the posts, if i got you twice or not at all you can thank me later, goodnight. :evil:
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
