kz750 starter grind?

  • andyvr4
  • andyvr4's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 38
  • Thanks: 0

kz750 starter grind?

19 Nov 2012 23:10 - 20 Nov 2012 11:21
#559220
Ok thank you ahead of time for responses. Also I have been searching for my issue and thought it was my starter clutch but now I feel its not. Ok my starter sounds like its missing and grinding but no teeth wear, also clymers repair manual says if I can turn the gear toward the front of the bike it should spin freely, and when turning to the rear it should not turn at all by hand and by that test it is supposed to be good. So I'm stumped. Any thoughts?

1983 kz750 Ltd 4 cyl
1983 kz750 Ltd 4 cyl.

Andy
Last edit: 20 Nov 2012 11:21 by andyvr4.

Please Log in or Create an account to join the conversation.

  • 650ed
  • 650ed's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 15334
  • Thanks: 2832

Re: kz750 starter grind?

19 Nov 2012 23:57
#559226
Welcome aboard! It would help much if you put your bike's year and model in your signature line. There are 2 cylinder and 4 cylinder KZ750 models and the starters are quite different. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: kz750 starter grind?

20 Nov 2012 02:53
#559247
andyvr4 wrote: Ok thank you ahead of time for responses. Also I have been searching for my issue and thought it was my starter clutch but now I feel its not. Ok my starter sounds like its missing and grinding but no teeth wear, also clymers repair manual says if I can turn the gear toward the front of the bike it should spin freely, and when turning to the rear it should not turn at all by hand and by that test it is supposed to be good. So I'm stumped. Any thoughts?
VID_20121114_152514.3gp
Hello, andyvr4, and WELCOME to KZrider forum! :cheer:

Including information about bike year and model is helpful to viewers and usually elicits better responses.
It's easy to put the information in your signature where it shows in all posted messages, past and future.
And may be changed whenever and as often as desired.
If wanting a signature showing information about the bike in posted messages, it's easy to do. Here's how:

Attachment addsig.jpg not found




Attachment picpostnewsite912x671.jpg not found




Good Fortune! :)
1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

  • andyvr4
  • andyvr4's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 38
  • Thanks: 0

Re: kz750 starter grind?

20 Nov 2012 11:19
#559275
Sorry its a 1983 kz750 Ltd 4 cyl.
1983 kz750 Ltd 4 cyl.

Andy

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: kz750 starter grind?

20 Nov 2012 12:08
#559278
andyvr4 wrote: ...1983 kz750 Ltd 4 cyl.

Am thinking the 1983 KZ750 4 cylinder models with LTD styling include:
KZ750-H4 chain drive
KZ750-F1 shaft drive
KZ750-N2 shaft drive "Spectre"

This link includes a free down-loadable service manual.
Scroll down to and download "The Bible."
kz.bike-night.com/

Starters are likely the same for both chain and shaft drive KZ750 models.

Good Fortune! :)
1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

  • andyvr4
  • andyvr4's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 38
  • Thanks: 0

Re: kz750 starter grind?

20 Nov 2012 12:36
#559282
Chain driven
1983 kz750 Ltd 4 cyl.

Andy

Please Log in or Create an account to join the conversation.

  • baldy110
  • baldy110's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 2272
  • Thanks: 512

Re: kz750 starter grind?

20 Nov 2012 12:51
#559283
It's your starter clutch. I have had starter clutches that tested fine and still be bad. I even had a brand new starter clutch assembly that was bad. If it sounds like a can full of rocks when you try and start it, it is going to be your starter clutch.

Please Log in or Create an account to join the conversation.

  • 650ed
  • 650ed's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 15334
  • Thanks: 2832

Re: kz750 starter grind?

20 Nov 2012 13:51
#559285
andyvr4 wrote: Chain driven

For future reference, since your bike is a 1983 KZ750 LTD with chain drive it can be identified as a KZ750-H4 when searching for parts, manuals, etc. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

  • andyvr4
  • andyvr4's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 38
  • Thanks: 0

Re: kz750 starter grind?

20 Nov 2012 21:08
#559354
Thanks for the search information. Is my starter clutch in the gear case? How could you tell your starter clutch was bad? Even the new one?
1983 kz750 Ltd 4 cyl.

Andy

Please Log in or Create an account to join the conversation.

  • Rowdymk2
  • Rowdymk2's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 18
  • Thanks: 0

Re: kz750 starter grind?

21 Nov 2012 03:29
#559411
I resently had a wining sound and what had happend was the barrels in my sprag clutch were mard up . I think that you are experiencing the same issue. I ended up getting some good barrels and cleaned up the mating surface with a fine grit emery cloth and my starter has worked fine every since just make sure to check the caps the go on the springs that push against the barrels inside the rotor they have a black coating the tips if they are wore out it will tare up the barrels good luck

Please Log in or Create an account to join the conversation.

  • baldy110
  • baldy110's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 2272
  • Thanks: 512

Re: kz750 starter grind?

21 Nov 2012 13:45 - 21 Nov 2012 13:47
#559445
andyvr4 wrote: Thanks for the search information. Is my starter clutch in the gear case? How could you tell your starter clutch was bad? Even the new one?

Because whenever I pressed the starter button the starter sounded like a can of rocks. It would turn the bike over but sounded terrible, that is the first symptoms of the starter clutch going bad. The next symptom is the starter slips while turning the engine over. Then it just stops working and spins without doing anything. With the new starter clutch that did not work I ended up replacing the rollers and springs in that one even though it came with new rollers and springs. That fixed the problem.
And yes your starter clutch is inside the case. You can replace it with the engine in the frame via the oil pan. I got pretty good at replacing it.
Last edit: 21 Nov 2012 13:47 by baldy110.

Please Log in or Create an account to join the conversation.

  • andyvr4
  • andyvr4's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 38
  • Thanks: 0

Re: kz750 starter grind?

28 Nov 2012 22:11
#560392
Thanks for the help. It was the starter clutch I changed it and BAM.. turns over thanks for all the help. But still no starting I'm having trouble with the timing.
1983 kz750 Ltd 4 cyl.

Andy

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum