help ID cams

  • peter1958
  • peter1958's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 1553
  • Thanks: 198
  • etbike3135
  • etbike3135's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 379
  • Thanks: 50

Re: help ID cams

25 Nov 2012 18:29
#560030
SBM Super Bike Mike. Dont know the grind.
1973 Kawasaki Z1
18 years in dragbikes
The following user(s) said Thank You: peter1958

Please Log in or Create an account to join the conversation.

  • peter1958
  • peter1958's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 1553
  • Thanks: 198

Re: help ID cams

25 Nov 2012 18:46
#560031
All I have found so far is today is his birthday lol

Please Log in or Create an account to join the conversation.

  • 4TheKZ1000
  • 4TheKZ1000's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: help ID cams

25 Nov 2012 19:19 - 25 Nov 2012 19:19
#560036
We can figure the base circle and total lift.....follow instructions....will let you know what you have.

kzrider.com/forum/2-engine/557751-how-to...-lift-at-home#559546
Last edit: 25 Nov 2012 19:19 by 4TheKZ1000.

Please Log in or Create an account to join the conversation.

  • peter1958
  • peter1958's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 1553
  • Thanks: 198
  • 4TheKZ1000
  • 4TheKZ1000's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: help ID cams

25 Nov 2012 21:49
#560061
peter1958 wrote: 1.480 - 1.940=0.46

can you please explain these numbers..... :huh:

Please Log in or Create an account to join the conversation.

  • peter1958
  • peter1958's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 1553
  • Thanks: 198

Please Log in or Create an account to join the conversation.

  • 4TheKZ1000
  • 4TheKZ1000's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: help ID cams

26 Nov 2012 20:35
#560152
peter1958 wrote: Nose to heel is 1.480 Base is 1.090

390 lift...thats a hot street cam.... B)

Please Log in or Create an account to join the conversation.

  • LarryC
  • LarryC's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1241
  • Thanks: 309

Re: help ID cams

27 Nov 2012 19:22
#560258
Unusual to see a small base circle in a small cam like that
Larry C.

Please Log in or Create an account to join the conversation.

  • 4TheKZ1000
  • 4TheKZ1000's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: help ID cams

27 Nov 2012 19:27
#560260
LarryC wrote: Unusual to see a small base circle in a small cam like that

Larry, does BC have anything to do with duration?

Thanks

Please Log in or Create an account to join the conversation.

  • LarryC
  • LarryC's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1241
  • Thanks: 309

Re: help ID cams

27 Nov 2012 21:10 - 27 Nov 2012 21:16
#560270
4TheKZ1000 wrote:
LarryC wrote: Unusual to see a small base circle in a small cam like that

Larry, does BC have anything to do with duration?

Thanks

At times, in some respects, yes but not drastically on those cams. It's lobe profile where it begins to change things as the base circle gets smaller. Two cams can have the same duration at a specific checking lift but be different in lobe profiles. As you reduce base circle significantly, the lobe shape can change.

On a virgin head, those cams are a candidate for 37.5 standard kz length intake valves because you have .020" smaller base circle. That translates into .010" or roughly 5 shim sizes. You gain half the measured reduce base circle in workable room to sink the valve for valve to valve clearance.

That is providing you run standard thickness buckets which in this case is no problem as they are a shim on top candidate without any issues.

Always look the nose over real good on a used cam. I have a lot of cams arrive with heads and the cams are worn out on one or more lobes. It's easy to spot by comparing the relative shape of the lobe points.
Larry C.
Last edit: 27 Nov 2012 21:16 by LarryC.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum