Weak Starter, or ???
- PaulyWally
-
Topic Author
- Offline
- User
-

Registered
- Total Bike Newbie
- Posts: 71
- Thanks: 0
Weak Starter, or ???
03 Dec 2012 17:29 - 03 Dec 2012 18:52
I'm kinda bummed. This has been over a year in the making (it's a slow project). I just got my bike back together with a new (rebuilt) starter, and the starter doesn't want to turn the engine very easily. I'm not sure if the starter is weak, or what. But I thought I'd post here to see what people who actually know what they're doing have to say.
What happens: I press the start button, the starter motor engages, but it only turns the engine once every couple seconds. I briefly connected my car battery to it to make sure it wasn't the battery, and it does the same thing. FYI: Kickstarter acts normal. Here's a video:
What happens: I press the start button, the starter motor engages, but it only turns the engine once every couple seconds. I briefly connected my car battery to it to make sure it wasn't the battery, and it does the same thing. FYI: Kickstarter acts normal. Here's a video:
1976 KZ750 Twin
Last edit: 03 Dec 2012 18:52 by PaulyWally.
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: Weak Starter, or ???
03 Dec 2012 17:40
Sounds like it's time to rebuild the starter clutch. The starter itself is probably fine. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Please Log in or Create an account to join the conversation.
- PaulyWally
-
Topic Author
- Offline
- User
-

Registered
- Total Bike Newbie
- Posts: 71
- Thanks: 0
Re: Weak Starter, or ???
03 Dec 2012 18:12 - 03 Dec 2012 18:13Sounds like it's time to rebuild the starter clutch. The starter itself is probably fine. Ed
That was the last of the repairs I went through this past year. I just finished rebuilding the starter clutch a couple weeks ago. I reused some parts and replaced others with new parts, NOS, and used. Before I closed up the bike, I ran the starter (briefly) just to witness the clutch engaging properly. It was - no slipping.
So, obviosly I can't be 100% positive at this point, but I "believe" that the starter clutch is not slipping. It catches, but just won't turn the engine easily.
1976 KZ750 Twin
Last edit: 03 Dec 2012 18:13 by PaulyWally.
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Weak Starter, or ???
03 Dec 2012 21:21
Maybe Im just not used to listening to a 750 twin turn over,but it sounds really weird to me anyway! :blink:
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Weak Starter, or ???
03 Dec 2012 21:26 - 03 Dec 2012 21:27
[attachment:1]C:\fakepath\Image.gif[/attachment]
Did you torque the bolt on end of crank?
[attachment:1]C:\fakepath\Image.gif[/attachment]
Did you torque the bolt on end of crank?
[attachment:1]C:\fakepath\Image.gif[/attachment]
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Last edit: 03 Dec 2012 21:27 by wireman.
Please Log in or Create an account to join the conversation.
- PaulyWally
-
Topic Author
- Offline
- User
-

Registered
- Total Bike Newbie
- Posts: 71
- Thanks: 0
Re: Weak Starter, or ???
04 Dec 2012 01:27 - 04 Dec 2012 01:27wireman wrote: Did you torque the bolt on end of crank?
I did. To 55ft-lbs (according to the service manual).
1976 KZ750 Twin
Last edit: 04 Dec 2012 01:27 by PaulyWally.
Please Log in or Create an account to join the conversation.
- KZ_900_Z1
-
- Offline
- User
-

Registered
- Posts: 6
- Thanks: 0
Re: Weak Starter, or ???
04 Dec 2012 15:26
i kinda got the same problem with my 76 kz900, but the key inside my starter keep breaking anyone know how i can fix it this will be the twelth key i have went through
1976 kawasaki kz900
Please Log in or Create an account to join the conversation.
- baldy110
-
- Offline
- User
-

Registered
- Posts: 2272
- Thanks: 512
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Weak Starter, or ???
04 Dec 2012 16:21KZ_900_Z1 wrote: i kinda got the same problem with my 76 kz900, but the key inside my starter keep breaking anyone know how i can fix it this will be the twelth key i have went through
Click here > www.kzrider.com/forum/4-electrical/56135...eeps-breaking#561350
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- Del_Herring
-
- Offline
- User
-

Registered
- Posts: 278
- Thanks: 29
Re: Weak Starter, or ???
04 Dec 2012 16:46
Sounds like the starter's just spinning freely to me. Starter clutch would make sense in that scenario or else whatevers supposed to make sure it engages, I'm not really that familiar with the starter setup on these things, it's different than I'm used to.
1983 KZ750-N2 Spectre
Please Log in or Create an account to join the conversation.
- PaulyWally
-
Topic Author
- Offline
- User
-

Registered
- Total Bike Newbie
- Posts: 71
- Thanks: 0
Re: Weak Starter, or ???
04 Dec 2012 17:09
Hmmm... I guess I'm a little confused as to why it might still be the starter clutch, even though it's not slipping. But again, this is my learning bike. So I freely admit ignorance.
If I take this thing apart again, what exactly do I need to be looking for? Because to my unexperienced eyes, it all looked to be working properly before I put the stator cover back on.
If I take this thing apart again, what exactly do I need to be looking for? Because to my unexperienced eyes, it all looked to be working properly before I put the stator cover back on.
1976 KZ750 Twin
Please Log in or Create an account to join the conversation.
- baldy110
-
- Offline
- User
-

Registered
- Posts: 2272
- Thanks: 512
Re: Weak Starter, or ???
04 Dec 2012 17:46 - 04 Dec 2012 17:48
I have installed brand new starter clutch components and it tested fine after putting it all together only to find out it still didn't work. I know you don't want to hear this because you just replaced it but your starter clutch is bad or at least something in the starter clutch is bad.
Check the surface the rollers ride on, the rollers themselves and their springs. Make sure none of these items are pitted or show any signs of wear. If the starter gear shows any cupping or wear replace it. Also if you have not done so replace the roller springs with new ones not used even they are within specs.
Check the surface the rollers ride on, the rollers themselves and their springs. Make sure none of these items are pitted or show any signs of wear. If the starter gear shows any cupping or wear replace it. Also if you have not done so replace the roller springs with new ones not used even they are within specs.
Last edit: 04 Dec 2012 17:48 by baldy110.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
