kz750 no spark?
- kwnics
-
Topic Author
- Offline
- User
-

Registered
- Posts: 11
- Thanks: 0
kz750 no spark?
10 Jan 2013 15:04
I replaced bad ignition coil but now I have no spark. Everything is testing fine except one side of dyna s ignition is low ohms. Any help would be much appreciated. Thank you in advance.
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: kz750 no spark?
10 Jan 2013 16:36kwnics wrote: I replaced bad ignition coil but now I have no spark. Everything is testing fine except one side of dyna s ignition is low ohms. Any help would be much appreciated. Thank you in advance.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- kwnics
-
Topic Author
- Offline
- User
-

Registered
- Posts: 11
- Thanks: 0
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Please Log in or Create an account to join the conversation.
- kwnics
-
Topic Author
- Offline
- User
-

Registered
- Posts: 11
- Thanks: 0
Re: kz750 no spark?
10 Jan 2013 16:57
Do I have to have charged battery? And will this test work with multimeter
Please Log in or Create an account to join the conversation.
- kwnics
-
Topic Author
- Offline
- User
-

Registered
- Posts: 11
- Thanks: 0
Re: kz750 no spark?
10 Jan 2013 18:18
Okay I have 12v going to coils now only 1 and 4 are sparking?
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: kz750 no spark?
10 Jan 2013 19:38Does this mean that the two outside spark plugs #1 and #4 are sparking (with their plug wires connected to the same ignition coil), and that the two inside spark plugs #2 and #3 are not sparking (with their plug wires connected to the other ignition coil)?kwnics wrote: Okay I have 12v going to coils now only 1 and 4 are sparking?
What ignition coils are fitted (stock; Dyna; other)?
What spark plug wires are fitted (stock; Dyna; other)?
To aid diagnosis, could swap wires from Dyna-S between ignition coils to see whether only 2 and 3 are then sparking.
If not already done, could re-test for spark, using new spark plugs, or swap the spark plugs around to see whether it makes any difference as to which plugs spark.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- kwnics
-
Topic Author
- Offline
- User
-

Registered
- Posts: 11
- Thanks: 0
Re: kz750 no spark?
11 Jan 2013 02:00
Stock ignition coils with dyna s ignition pickups. Yes 1&4 are running to one coil and 2&3 are running to the other coil. I will run the switching wires test tomorrow.
There is 4 brand new spark plugs and the wires are testing good.
There is 4 brand new spark plugs and the wires are testing good.
Please Log in or Create an account to join the conversation.
- kwnics
-
Topic Author
- Offline
- User
-

Registered
- Posts: 11
- Thanks: 0
Re: kz750 no spark?
11 Jan 2013 13:17
Okay ran test with switching wires between dyna s and had spark on the other two with no spark on original so does that mean its the ignition pickup? Thank for all the help!!
Please Log in or Create an account to join the conversation.
- loudhvx
-
- Offline
- KZr Legend
-

Registered
- Posts: 10863
- Thanks: 1622
Re: kz750 no spark?
11 Jan 2013 13:24
Did the bike originally have points? If not, then you may eventually burn out the Dyna S when using stock coils. Dynatek says 3.0 ohms is the minimum resistance for coils used with the Dyna S.
1981 KZ550 D1 gpz.
Kz550 valve train warning.
Other links.
Kz550 valve train warning.
Other links.
Please Log in or Create an account to join the conversation.
- kwnics
-
Topic Author
- Offline
- User
-

Registered
- Posts: 11
- Thanks: 0
Re: kz750 no spark?
11 Jan 2013 13:28
The dyna was on there when I bought it. My coils read around 3 ohms resistance. Will bike still run with only 2 plugs sparking. And can I run both coils off one wire from dyna or will that mess things up?
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: kz750 no spark?
11 Jan 2013 13:58 - 11 Jan 2013 14:04Will bike still run with only 2 plugs sparking -- Yes, usually, but not very well, and probably barely good enough to out-run an older Harley.kwnics wrote: The dyna was on there when I bought it. My coils read around 3 ohms resistance. Will bike still run with only 2 plugs sparking. And can I run both coils off one wire from dyna or will that mess things up?
can I run both coils off one wire from dyna -- No
or will that mess things up? -- Yes
Each ignition coil has its own independent "secondary loop" including the secondary winding, both plug wires, plug cap on each plug, the spark plugs themselves, and the metal engine head.
Lost conductivity in the secondary loop disallows spark on both plugs within the loop.
For example, a faulty connection between a plug wire and cap could cause a "break" in the secondary loop.
Has the non-firing secondary loop been ohm-tested between the caps to determine whether there is a "break" within the loop?
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Last edit: 11 Jan 2013 14:04 by Patton.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
