Valve clearances

  • geobass
  • geobass's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • 75 Z1-B
  • Posts: 29
  • Thanks: 1

Valve clearances

20 Jan 2013 21:20
#568371
New guy needs some help...

Intake clearances:

1 .0015 2 .004 3 .005 4 .004

Exhaust clearances:

1 .005 2 .0015 3 .008 4 .005

So I have one exhaust and one intake on the tight side. These will have to be adjusted.

Should I worry about the .008 exhaust valve?

Looking at the service manual I see the special tool to hold the bucket down while using the camshaft to depress it. Is it safe to move the camshaft out of the way of the shim to remove it?
I guess my question is there clearance between the valve and piston?

Thanks in advance,

George

Please Log in or Create an account to join the conversation.

  • Motor Head
  • Motor Head's Avatar
  • Offline
  • User
  • User
    Registered
  • FIX UP YOUR BIKE RIGHT AND CHEAP
  • Posts: 5137
  • Thanks: 393

Re: Valve clearances

21 Jan 2013 00:21
#568428
You May be able to swap the shims around on the tight and the loose. Maybe that is. But those tight ones .0015", are bad news. The .008" is to loose, I'd get it to the .005 or .004" setting on the EX.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum